i have a problem with my i phone3g, i followed every step but when itried to turn it on.. the screen wont swtitch but if ill connect it to the charger it has sound.. hope you guys might help me with my problem=((
Btw... I've also noticed that #3 connector can be disconnected without opening up the clipper holding the connector. Is this a huge problem for eg. a new LCD or not?
My original LCD bricked like few days ago because I made a mistake while I was assembling my iPhone 3GS and I didn't know that it went ON so when I attached my LCD to motherboard while phone was ON... from now on I can only see a white screen (not even Apple logo). Everything else (like vibration and sounds) seems to work normally but I don't know which LCD I should buy. And will the new LCD have any difference.
Sorry for not responding to any of your questions! Rembmer, for advice or help feel free to contact our support line M-F 10am-6pm. We will give you guys all the correct information and guide you towards the correct products or service. We are here to help!
Thank you so much.....to the person that couldn't see the screen: I plugged the LCD straight into the phone to test it first.....& you have to put a little pressure to plug it in....you will here it click & the screen should light up....mine worked like a charm!!!! : )
My mom smashed the digitizer and the LCD display on her iphone today, and I'm planning on fixing it. Thanks for the good instructional video. Thumbs up!!!
Hi my iphone 3gs screen is playing up , lately the screen goes black or very dimmed and dark intermittently every now and then i barely can see the screen. Do you know if its the LCD panel faulty or something else .
@filipepw i had the same problem you need to use a different screw driver insted of the one that came in your tool kit set the quality of them are rubbish
I'm unable to loosen the screws on the sides of the lcd mounting bracket, and it looks as if I'm starting to strip them. It appears apple uses some sort of adhesive around the screws. How do you loosen that stuff up?
I had the same problem but used WD40 on a cotton bud to smear a little of it on the base of the screws as well as each head. Leave overnight to soak in. If you've worn the head of the screws a bit trying to remove them also use a screwdriver that's just slightly larger than before. Press down really firmly getting someone else to hold the phone steady. And hey presto!
dear my kid he pressed the screen from top right and since then iphone is displaying only white screen completely white.....is it LCD gone or is there anything else wrong..??
your the first one who actually details on how to remove the LCD, the videos i looked at they just said it popped out, ended up me breaking the lcd and having to order another, once again, thanks for putting into detail :)
screen worked before I changed the lcd, things showed up etc but now I get nothing but a blank screen. Phone is on because it vibrates and stuff but the screen is lifeless. whats the problem?
this gave me peace of mind cause my phone just showed a bright white screen. i thought my iphone just broke but im gonna buy the kit and repair it :) thank you sooo much! btw i can hear a bit of an accent XD
HI i believe i connected the wires correctly after a housing replacement but when i turn on the phone the screen is white and wont do anything. please help! Could it just be the LCD? the number 3 wire slides off without flipping up the little latch. is that a wire bad or the motherboard connection to number 3 bad?
i got problems with my iphone.. i broke the lcd.. the phone was working perfectly.. i change the lcd for a new one.. but the phone is no working.. i need a little help with that..
I used this tutorial and replaced my iPhone 3GS LCD screen as there was no backlight. Everything went perfectly well after replacement and backlight works fine now but the touch screen isn't responding. It won't register any of my touches when I tried to unlock the phone. But it did register when I powered it off for the slider on the top half. So top half seems to be responding but the bottom isn't. What should I do to fix this problem?
Just get some paper, about 1mm thick and put it on top of cables 1 and 2, then put the phone back together. This will hold the cables in place after you close it all up.
hey i got the iphone 3gs and the screen is white only all works but nothing there but white do i need to replace the galss alos or just this item to get it back to normal again i got nothing there no apple logo nothing no slide nothing cheers??:(
@p3ters00 I had the same problem. i ended up having to use my 18volt cordless drill with a phillips regular size bit and just used firm pressure for a like 30 seconds until it finally came loose. just wasn't able to reuse the screw... hope this helps you. iphone 3gs works great now!!!!
@p3ters00 I had the same problem. i ended up having to use my 18volt cordless drill with a phillips regular size bit and just used firm pressure for a like 30 seconds until it finally came loose. just wasn't able to reuse the screw... hope this helps you. iphone 3gs works great now!!!!
i just attempted to remove the front with the sucker and only the piece of glass was removed? (this was after i realised it wasnt connected properly and re-attepted to remove the front peice) ) is there anything i can do? please help!
Was very easy to replace LCD screen, had a white screen when put back together, pulled it apart and started all over again, still had a white screen, getting frustrated by this time, thought I would try rebooting phone with HOME/POWER buttons, works perfectly now, thanks
This guy has cost me an iPhone! Thanks to his incorrect information that the iPhone 3G and 3GS screens are the same I ended up trying to fit a 3G screen in a 3GS and wore out the connection, causing my backlight to fail completely, no matter what LCD i tried. Also, there are certain tips he doesn't mention of how to remove it safely. Honestly, you're better off spending a little extra and getting it repaired professionally! The cost for me to sort has become too much!
This is an excellent instructional step by step video!! I dropped my iPhone a few months ago and some of the LCD crystals cracked..I debating on buying a new iphone or having it replaced by a professional and i decided to order the parts and try it myself, cause either way, my iphone was unusable! luckily, i found this video and was able to repair it myself and it works great!! thanks sooo much zeetron!!!!!!!!
@zeetroninc Did iTunes recognize your iphone when your screen wasn't working, because mine doesn't and i dont know if it is just the screen or somthing else.
Hey my iphone fell in water... Yesterday.. Today that i tried to turn it onnits on a white screen and i can recieve call and is working but my screen is in white...... Do i hvae to change the LCD? Thaks
I have a 3gs bought a new assembly LCD) installed it,,, when it turned on the screen its dark , if i turn the brightness down to half or below the screen (turns on) its usable but the screen goes dark if i turn up the brightness past half way could it be the LCD or the Coil.... if it was a coil wouldnt the screen be dark all the time anyone have any idea's
what a great tip this is. i fell in the water with my iphone in my pocket. i dried it everything worked but the lcd screen which stayed very dark. i bought the lcd part and followed this video and voila! my iphone is like new again. THANK YOU ZEETRONIC
hey, i recently replaced my lcd screen on my 3g and when i re-attached everything nothing would turn on.i rebooted the phone and the apple appeared, but than the screen turned white. what do do?if i bring it to the genius bar will they fix it if i dont tell them i replaced it??help please.
Great video lots of clear straight talk. I put the screen all back together, but all I get is a white/blank screen any suggestion as to what may need to be done? Thank you.
Thank you sooooo much. Your video was much less stressful and easier to follow than another one I used, I struggled for ages to change the touchscreen but when I put the phone together the LCD was damaged. So ordered a new one and changed it in 15mins I am a physio and fix people's bodies, now I can add my new skill fixing I-phones. You saved me a small fortune, and I have my phone for tonight's new year celebrations. Thank you and Happy New year xx
Thank you sooooo much. Your video was much less stressful and easier to follow than another one I used, I struggled for ages to change the touchscreen but when I put the phone together the LCD was damaged. So ordered a new one and changed it in 15mins I am a physio and fix people's bodies, now I can add my new skill fixing I-phones. You saved me a small fortune, and I have my phone for tonight's new year celebrations. Thank you and Happy New year xx
well i got it to work everything is fine its just that the two stupid screws on the metal bracket wont come out and when i try to put it in the iPhone, it wont close. Any help? I cant order another one because i dont got no money. Any help would be appreicaited.
Either your digitizer is damaged or its not connected properly. Don't worry though, a new one isn't very expensive. I don't know which of the three connectors go to the digitizer.
how can o fix my iphone 3gs and also restore doesnt work i try to bring to repairing store but no one can fix.the iphone is already on itune infront.is this possible hardware problem?ang if the problem is hardware it is possible to fix.pls help me.i feel crying because of my iphone situation
thanks soooooo much the rip off apple store wanted £110 to fix it when a 15 year old kid who knows nothing about phones can do it for £15 made my day :D
Hi, my iPhone 3GS got wet, and after a good and throrough drying everything works but the LCD backlight. I spoke with someone at your site on chat, and they said that I needed to replace my LCD. I ordered the part from Zeetron, and did the replacement this morning with these instructions. I am pretty much where I was before. LCD and phone work fine, but no backlight. Any suggestions?
how to order?my iphone got wet with the perfume... and its got dark spot on the back of lcd but it is still working. do i need to change my lcd or do i need to wipe the lcd ?
You fucking legend!!!! Ah thank you so much man
IMyFriendAmPwnarelli 1 week ago
Thanks worked for me fine!
TwinsenRS 1 week ago
Attention! Last 9 minutes, come to get your iphone4! tm0q accuc.info
barbietyykoiz85os 2 weeks ago
Now my touch isn't working , what to do ? All of the connectors are connected . Please help !!!
poloman97 2 weeks ago
Gay
WISOSEXO77 3 weeks ago
thank you!:))
Bene919 4 weeks ago
Thanks worked great for me !!!
uni06 1 month ago
This has been flagged as spam show
But would if parts of the screen doesnt work , do I need a new LCD ? Somebody help !!!!
poloman97 1 month ago
Great video! Thanks so much!
tuber20062006 1 month ago
This is one of the best videos on how to replace damage parts on your iPhone,keep it up guys great job.
katource1 1 month ago
Awesome! Easy as pie... Thanks for the video!
mistklmon 2 months ago
i have a problem with my i phone3g, i followed every step but when itried to turn it on.. the screen wont swtitch but if ill connect it to the charger it has sound.. hope you guys might help me with my problem=((
mengchuvivo 2 months ago
fixed! Thanks for the vid
sharlenewhyte 2 months ago
Ugh, wire 2 wont snap in D:
rayruiz12345 2 months ago
Excellent video. I've just replaced my broken lcd with no problems at all.
terone 2 months ago
Btw... I've also noticed that #3 connector can be disconnected without opening up the clipper holding the connector. Is this a huge problem for eg. a new LCD or not?
Thx again.
the4usclan 2 months ago
Comment removed
the4usclan 2 months ago
Hi!
My original LCD bricked like few days ago because I made a mistake while I was assembling my iPhone 3GS and I didn't know that it went ON so when I attached my LCD to motherboard while phone was ON... from now on I can only see a white screen (not even Apple logo). Everything else (like vibration and sounds) seems to work normally but I don't know which LCD I should buy. And will the new LCD have any difference.
Can you please help me with this problem?
the4usclan 2 months ago
thank you so much! wire 3 was a little hard to slide back in but I got it eventually.
kdhillon82392 2 months ago
thank you that was good help my phone works perfect
tariktaxi 2 months ago
Sorry for not responding to any of your questions! Rembmer, for advice or help feel free to contact our support line M-F 10am-6pm. We will give you guys all the correct information and guide you towards the correct products or service. We are here to help!
855-ZEE-TRON
Thanks!
zeetroninc 2 months ago
Can I still do this to my phone if it is jailbroken?
greenleaf646 2 months ago
@greenleaf646 are joking or are you catually for real and if youre serious than yes
soundstageone 2 months ago
@greenleaf646 Jailbreaking has nothing to do with the hardware. Yes, you can do this with a jailbroken phone.
lex224ification 2 months ago
Thank you so much.....to the person that couldn't see the screen: I plugged the LCD straight into the phone to test it first.....& you have to put a little pressure to plug it in....you will here it click & the screen should light up....mine worked like a charm!!!! : )
bethwingate777 3 months ago
Guess what, I'm a rocket scientist :)
timothyeah 3 months ago
i did this and it helped so much but i cant see the screen what do i do?
xTOXICxHACKERx 3 months ago
quick question... my lcd doesnt seem like it would fit on the metal backing.... what do i do????? btw i have an iphone 3g
xTOXICxHACKERx 3 months ago
Great video!
wejmiller 3 months ago
THANK YOU SO MUCH<3
JohanHelland 3 months ago
Can u put a retine lcd to an iphone 3gs?
TheUriel6261 3 months ago
excellent video
phillyfrankie 4 months ago
i can't get the tiny screws inside to unscrew! somebody help!
momopoet 4 months ago
@momopoet you might by a set with screewdrivers+glass/lcd screen :)
I dont know if you can find a screwdriverset without the glass/lcd screen, but if you go to ebay, you should probably find some ;)
BobbenxdMusic 4 months ago
@ImaginativeBrowsing without the LCD you won't be able to see exactly what ur doing on the iPhone.
ghettobird2012 4 months ago
What do you do if the actual screen seperates from the digitizer?
but199018 4 months ago
Comment removed
McSkollie 4 months ago
This has been flagged as spam show
Go to freegiveawayrewards.info for an iPhone 4s giveaway xD
Nice vid :)
emileeanf 4 months ago
Fuck that everything your selling is cheaper on Amazon.
MigrantBrute 4 months ago
does the touchscreen still work with out the lcd? did anyone check?
ImaginativeBrowsing 4 months ago
Or buy it for cheap on Amazon.com
bernyjae77 4 months ago
perfect, you done in the best way that i could find in the youbute, thnx man.
pgh10001 4 months ago
just fixed my mums phone with your instructions, thanks so much :)
sheergalaxy 5 months ago
thanks son!!
sebasflorez999 5 months ago
My mom smashed the digitizer and the LCD display on her iphone today, and I'm planning on fixing it. Thanks for the good instructional video. Thumbs up!!!
Mdudeman13 5 months ago
No!!! I accidentally flagged!!!!
Mdudeman13 5 months ago
You're awesome!!! Quality instructional video. Big thumns up from me :->
LordMonkcheese 5 months ago
thanks man! u r the best! it worked out perfectly!
nicoslau 5 months ago
Your the best man! :)
MonEqueG17 5 months ago
Great step by step instructions. They were easy to follow and I now have a working phone again. Kudos.
foreshaken 5 months ago
Your tutorial made replacing the lcd really simple!!! Thanks a bunch!
anitawu123 5 months ago
worked great thank you very much
ha2hai 5 months ago
worked great thankyou very much
ha2hai 5 months ago
broke my lcd while replacing my cracked screen (doh!) but you tutorial made replacing the lcd really simple! Thanks for the tutorial!
Nelsonpby 6 months ago
excellent video! cheers
lovecareshare 6 months ago
Hi my iphone 3gs screen is playing up , lately the screen goes black or very dimmed and dark intermittently every now and then i barely can see the screen. Do you know if its the LCD panel faulty or something else .
samdc3000 6 months ago
Thanks a lot for the explanation!! It worked great!!
javisergar 6 months ago
If you trying open iphone like on this video you have very good chances to break your ribbon cables.
Be careful.
Safojas 6 months ago
Great video, followed the instructions step by step and all is working great - thanks dude!!!
Rabd333 6 months ago
Followed the video instructions exactly, new LCD is working great, but now the bottom half of touchscreen doesn't work. :-(
klgood1 6 months ago
Cheer Mate
Good Video iphone All Back And Working
For The U.K
MrBrians003 6 months ago
Great video, made repair easy, and now phone works great !!
gohabs9 6 months ago
thanks heaps man :)
roshdoggy 7 months ago
thanks brilliant video that shows you how to remove and insert the LCD screen back in without cracking it!
adiltai90 7 months ago
hi i am unable to remove the front of my iphone as the digitizer gone and have nothing now to attach the sucker to any ideas people????
DJSmith1307 7 months ago
i cant take out the screws you remove at 1:50 ...
filipepw 7 months ago
@filipepw i had the same problem you need to use a different screw driver insted of the one that came in your tool kit set the quality of them are rubbish
adiltai90 7 months ago
thank you man.
yar80 7 months ago
FINALLY A GOOD VIDEO WHERE YOU CAN FIX YOUR IPHONE STEP BY STEP WITHOUT HAVING TO BUY ANYTHING... THANK YOU SO MUCH!!!
Cindyy00LN 7 months ago
You are The man!!!!!!!!!!!!!
MrT6700 7 months ago
fuck do you know how to fix the top of the glass from pushing out??
cityvice123 7 months ago
VERY helpful, thank you! I have my phone back <3
cnkeebler 7 months ago
Fuck yea! Thanks. If you're in N Jersey homie, hit me up, I want to smoke you out.
nvlptl 7 months ago
Good demonstration of just how to do the job
Well Done
awfmel 7 months ago
I'm unable to loosen the screws on the sides of the lcd mounting bracket, and it looks as if I'm starting to strip them. It appears apple uses some sort of adhesive around the screws. How do you loosen that stuff up?
stevenkeyz 8 months ago 2
@stevenkeyz
I had the same problem but used WD40 on a cotton bud to smear a little of it on the base of the screws as well as each head. Leave overnight to soak in. If you've worn the head of the screws a bit trying to remove them also use a screwdriver that's just slightly larger than before. Press down really firmly getting someone else to hold the phone steady. And hey presto!
oneoff2011 7 months ago
dear my kid he pressed the screen from top right and since then iphone is displaying only white screen completely white.....is it LCD gone or is there anything else wrong..??
cypyboy 8 months ago
nice tip about bending the cable on the white line. I didn't know about that.
shylimelight 8 months ago
your the first one who actually details on how to remove the LCD, the videos i looked at they just said it popped out, ended up me breaking the lcd and having to order another, once again, thanks for putting into detail :)
batmike1990 8 months ago
what kit is it
annoyingorange90929 8 months ago
screen worked before I changed the lcd, things showed up etc but now I get nothing but a blank screen. Phone is on because it vibrates and stuff but the screen is lifeless. whats the problem?
lukemortlock 8 months ago
Comment removed
lukemortlock 8 months ago
great video, thanks
dami916 8 months ago
cheers mate, good vid
UrRival3 8 months ago
do you have to buy the kit? or can you just do it with a screen you get off some other site?
kickyourdog04 8 months ago
Thank you so much! this worked for me!
soujiro200 9 months ago
Best, most complete LCD replacement video anywhere! Thanks so much. Couldn't have done it without this one.
rogerjamestv 9 months ago
Great tutorial, very detailed. Thanks for uploading.
miklo247 9 months ago in playlist Repair Stuff
Many thanks mate. Worked like a dream. Phone is as good as new again.
creaware 9 months ago
After you replace your new LCD make sure you press and hold down home button and sleep button. This will reboot your iPhone
SuperLebrandon 9 months ago
Thank you thank you thank you! Changed my screen with no issues at all.
tuberseb 9 months ago
this gave me peace of mind cause my phone just showed a bright white screen. i thought my iphone just broke but im gonna buy the kit and repair it :) thank you sooo much! btw i can hear a bit of an accent XD
shishashi154 9 months ago
thanks dude your video was awesome, replaced my LCD without any issues thanks to your detailed and easy instructions!
rup43 10 months ago 2
VERY HELPFUL thanks very much!!
cherrylicious2 10 months ago
HI i believe i connected the wires correctly after a housing replacement but when i turn on the phone the screen is white and wont do anything. please help! Could it just be the LCD? the number 3 wire slides off without flipping up the little latch. is that a wire bad or the motherboard connection to number 3 bad?
vbsoccer008 10 months ago
Im trying to take the screws off but its not coming off.
When I ordered a screen,it came with suction pad,1 small screwdriver,& the blue thhing to take off the wires.
Can you please help me.
Thank You.
JPlatinumBeatz 10 months ago
i got problems with my iphone.. i broke the lcd.. the phone was working perfectly.. i change the lcd for a new one.. but the phone is no working.. i need a little help with that..
evo2008 10 months ago
The suction pad just isn't sucking it off..
charlie2592 11 months ago
HELP!!! The one of the 2 bottom case screws next to the charger socket is cross threaded the screw driver wont grip what do i do?
JP2K9BITCH 11 months ago
wire 3 is pissing me off!!!
il2rock 11 months ago
Thank you so much :) Got the items from you and did it myself works great :)
EnvyJen4 11 months ago
thank you so much! what a great tutorial! my phone works pretty good now!
MrsLoneley 11 months ago
I used this tutorial and replaced my iPhone 3GS LCD screen as there was no backlight. Everything went perfectly well after replacement and backlight works fine now but the touch screen isn't responding. It won't register any of my touches when I tried to unlock the phone. But it did register when I powered it off for the slider on the top half. So top half seems to be responding but the bottom isn't. What should I do to fix this problem?
msaudsrk 11 months ago
@msaudsrk i had the same thing happen to me about a couple hours ago, idk what to do!
niggerguy805 11 months ago
@msaudsrk
Cable 2 is loose.
Just get some paper, about 1mm thick and put it on top of cables 1 and 2, then put the phone back together. This will hold the cables in place after you close it all up.
WaterMelnKidd 11 months ago
Comment removed
msaudsrk 11 months ago
Thanks for this video! Fixed it myself and it works great!
Ben3feathers 11 months ago
This has been flagged as spam show
I found EASY way to get Apple stuff for FREE, check out my CHANNEL
zzcoolgeekzz 11 months ago
Is your connector 1 well connected ? Check if it's in place, close carefully and reboot holding Sleep-wake and home button until the apple appears.
Be patient ! It might need 2 or 3 reboots that you don't see.
desertbumpa 11 months ago
hey i got the iphone 3gs and the screen is white only all works but nothing there but white do i need to replace the galss alos or just this item to get it back to normal again i got nothing there no apple logo nothing no slide nothing cheers??:(
fastvpbt1 11 months ago
Thanks alot great tutorial :) 5 stars
lSuLLyl 11 months ago
great video, work perfect. Thanks :)
joymig7 11 months ago
nice job explaining.. better than others
spatchEphunk 11 months ago
Oh man doesn't look too hard might be trying it just need to order the LCD
Thansk for the video was very helpful man
erealpe13 11 months ago
I am cursed with stripping screws.
now I cannot fix my phone coz I stripped one of the screws and cant get the LCD off :(
p3ters00 1 year ago
@p3ters00 I had the same problem. i ended up having to use my 18volt cordless drill with a phillips regular size bit and just used firm pressure for a like 30 seconds until it finally came loose. just wasn't able to reuse the screw... hope this helps you. iphone 3gs works great now!!!!
desnowboarder 1 year ago
This has been flagged as spam show
@p3ters00 I had the same problem. i ended up having to use my 18volt cordless drill with a phillips regular size bit and just used firm pressure for a like 30 seconds until it finally came loose. just wasn't able to reuse the screw... hope this helps you. iphone 3gs works great now!!!!
desnowboarder 1 year ago
i just attempted to remove the front with the sucker and only the piece of glass was removed? (this was after i realised it wasnt connected properly and re-attepted to remove the front peice) ) is there anything i can do? please help!
jackgreen341 1 year ago
Thanks, great tutorial, EASY to follow!! i fixed my 3g LCD in a jiffy thank again!!!!!!!!!!!!!
funnzone 1 year ago
@zeetronic
Not that clear... but everything becomes obvious while doing it.
Thanks :-)
@everybody reading this :
Be sure to put the connector straight up.
Mine wasn't precisely in place, and it's stiff : it disconnected while closing, and then I lit the phone for test !!
--- I had grey screen, and after reconnection it needed a couple of hard-reboots... now it's fine.
Next time I'll make it better :)
Hope YOU do now ! Be precise !
desertbumpa 1 year ago
Was very easy to replace LCD screen, had a white screen when put back together, pulled it apart and started all over again, still had a white screen, getting frustrated by this time, thought I would try rebooting phone with HOME/POWER buttons, works perfectly now, thanks
ssammiix 1 year ago
This guy has cost me an iPhone! Thanks to his incorrect information that the iPhone 3G and 3GS screens are the same I ended up trying to fit a 3G screen in a 3GS and wore out the connection, causing my backlight to fail completely, no matter what LCD i tried. Also, there are certain tips he doesn't mention of how to remove it safely. Honestly, you're better off spending a little extra and getting it repaired professionally! The cost for me to sort has become too much!
olliemultimedia 1 year ago
@olliemultimedia Sorry, but it is clearly said from the start that it's the same for 3G and 3GS, EXCEPT for the parts !
desertbumpa 1 year ago
Is the iPhone 3G and 3GS LCD the same?
LebronandWallace 1 year ago
dude, thank you!!!! this video was awesome!! i fixed my iphone!! :DDD
Thanks again!!
justjustyn1 1 year ago
This is an excellent instructional step by step video!! I dropped my iPhone a few months ago and some of the LCD crystals cracked..I debating on buying a new iphone or having it replaced by a professional and i decided to order the parts and try it myself, cause either way, my iphone was unusable! luckily, i found this video and was able to repair it myself and it works great!! thanks sooo much zeetron!!!!!!!!
bubbledogs38 1 year ago
would there be a differecne between the iphone 3gs and the iphone 3g cable for the lcd, and is there a way to find out
TheJettalover91 1 year ago
Thx dude, had sucess :)
DerMasterUploader 1 year ago
can u use 3g parts on a 3gs or 3gs parts on a 3g
thomas11189 1 year ago
Thanks this video really helped!
It took a while to turn on but all you have to do in that situation is hold the power and big button down for 5 -10 seconds and reset the iphone.
dmastronardi76 1 year ago
My notes: for anyone new to doing this the last connector is a B---- getting back on. It took me forever....
n2themuzic 1 year ago
@zeetroninc Did iTunes recognize your iphone when your screen wasn't working, because mine doesn't and i dont know if it is just the screen or somthing else.
MrMcclovinit 1 year ago
are the 3G and 3GS LCD the same?
suttondan1 1 year ago
Hey my iphone fell in water... Yesterday.. Today that i tried to turn it onnits on a white screen and i can recieve call and is working but my screen is in white...... Do i hvae to change the LCD? Thaks
juanse0001 1 year ago
@juanse0001 hi yes u do i think i have the same problam
thomas11189 1 year ago
Comment removed
thomas11189 1 year ago
@thomas11189 hi thanks just worned cuz i need a lcd screen for my iphone
thomas11189 1 year ago
I have a 3gs bought a new assembly LCD) installed it,,, when it turned on the screen its dark , if i turn the brightness down to half or below the screen (turns on) its usable but the screen goes dark if i turn up the brightness past half way could it be the LCD or the Coil.... if it was a coil wouldnt the screen be dark all the time anyone have any idea's
Lazer816 1 year ago
Thank you so much, Zeetron. These steps, as well as the steps for how to replace the screen, were very helpful.
To people watching these videos, some tips:
1. Watch the videos all the way through and take notes.
2. Be gentle with the wire removal and replacement.
3. If trouble removing screws, use flathead screwdriver first, then phillips
4. Take your time
Watching the videos first really helped and I could almost do it by memory. Also, parts worth the price.
Thanks, Zeetron!
dougkeppy 1 year ago
what a great tip this is. i fell in the water with my iphone in my pocket. i dried it everything worked but the lcd screen which stayed very dark. i bought the lcd part and followed this video and voila! my iphone is like new again. THANK YOU ZEETRONIC
jungmini1 1 year ago
This has been flagged as spam show
) Hold your breath.
2) Copy all of these steps.
3) Go to two other video.
4) Paste it in the comments.
If you can do all of this without breathing you're a god
gogiants760 1 year ago
! my screen is new and turned on then went black ! cant reset it wont work! help helpppppppppp help help
TheA911a 1 year ago
does iphone 3g and 3gs have same lcd screens? because i have an lcd and the number 1 cant be fixed on the desired position..
AdeelChoudhari 1 year ago
hey, i recently replaced my lcd screen on my 3g and when i re-attached everything nothing would turn on.i rebooted the phone and the apple appeared, but than the screen turned white. what do do?if i bring it to the genius bar will they fix it if i dont tell them i replaced it??help please.
gofish981 1 year ago
thank you had to replace LCD on my wifes phone after WSOD developed after it fell 18 inches on to the floor
alunphillips 1 year ago
thanks worked out great
googles23m 1 year ago
Very good kit but becareful about the screw driver, it's alittle to big for the screw. Ooohh note one more thing, if u get a
Black sceen after u install it, use hold home for 5 second and then power.
oogoditscharlie 1 year ago
thank you i got mine going
dionkn 1 year ago
Comment removed
PS3FR12 1 year ago
Great video lots of clear straight talk. I put the screen all back together, but all I get is a white/blank screen any suggestion as to what may need to be done? Thank you.
bestfriendbikers 1 year ago
Thank you sooooo much. Your video was much less stressful and easier to follow than another one I used, I struggled for ages to change the touchscreen but when I put the phone together the LCD was damaged. So ordered a new one and changed it in 15mins I am a physio and fix people's bodies, now I can add my new skill fixing I-phones. You saved me a small fortune, and I have my phone for tonight's new year celebrations. Thank you and Happy New year xx
rosenajohnston 1 year ago
Thank you sooooo much. Your video was much less stressful and easier to follow than another one I used, I struggled for ages to change the touchscreen but when I put the phone together the LCD was damaged. So ordered a new one and changed it in 15mins I am a physio and fix people's bodies, now I can add my new skill fixing I-phones. You saved me a small fortune, and I have my phone for tonight's new year celebrations. Thank you and Happy New year xx
rosenajohnston 1 year ago
@amirriveroll no
FightWithDevil 1 year ago
okay so i have a 3GS but how do i know if the reason the touchscreen barely works is because of what? is it the screen or the digitizer? thanks
voyagerka100 1 year ago
well i got it to work everything is fine its just that the two stupid screws on the metal bracket wont come out and when i try to put it in the iPhone, it wont close. Any help? I cant order another one because i dont got no money. Any help would be appreicaited.
LebronandWallace 1 year ago
This has been flagged as spam show
Isn't iphone 4 too expensive? Check out offer at gifter7 . com - get this product free!
HewaqQucalu 1 year ago
whats the difference between the digitizer and the glass.
Also I changed my digitizer/glass and messed up the home button and the LCD and I couldnt put glue on the bottom side of the glass. :(((((
cloudcally 1 year ago
@shaaaawn @daikenpaul
Either your digitizer is damaged or its not connected properly. Don't worry though, a new one isn't very expensive. I don't know which of the three connectors go to the digitizer.
henricryden 1 year ago
@henricryden the wire number 3 goes to the speaker and the 2 goes to the digitizer and the 1 goes to the LCD.
cloudcally 1 year ago
hey when i connect everything my screen doesnt even turn on? any ideas why?
CaTcHaFiShBiTcH 1 year ago
@CaTcHaFiShBiTcH The same here, it sucks...
LustrumQuintus 1 year ago
Followed the instructions, worked perfectly.
nairblooc 1 year ago
@shaaaawn please let me know if u figure this out.. mine is doing the exact same
flamineon7 1 year ago
how can o fix my iphone 3gs and also restore doesnt work i try to bring to repairing store but no one can fix.the iphone is already on itune infront.is this possible hardware problem?ang if the problem is hardware it is possible to fix.pls help me.i feel crying because of my iphone situation
daikenpaul 1 year ago
hey im planning to do this repair on my own, what brand do you highly recommend for the lcd screen? im getting it off of amazon.
PhotgraphyANDBass 1 year ago
hey im planning to do this repair, what is the best brand for the lcd screen? im getting it off of amazon.
PhotgraphyANDBass 1 year ago
thanks soooooo much the rip off apple store wanted £110 to fix it when a 15 year old kid who knows nothing about phones can do it for £15 made my day :D
relentlessdirtjumper 1 year ago
Here is one for you to fix: ttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200551763470&ssPageName=STRK:MESELX:IT
stoaar 1 year ago
Hi, my iPhone 3GS got wet, and after a good and throrough drying everything works but the LCD backlight. I spoke with someone at your site on chat, and they said that I needed to replace my LCD. I ordered the part from Zeetron, and did the replacement this morning with these instructions. I am pretty much where I was before. LCD and phone work fine, but no backlight. Any suggestions?
rappjr 1 year ago
This has been flagged as spam show
I am unable to use the screwdriver that came with the package. It does not fit properly in the groove????! Help!
mo17701734 1 year ago
Comment removed
mo17701734 1 year ago
I am unable to use the "magnetic" screwdriver that came in the package... it does not fit properly in the groove?!
mo17701734 1 year ago
how to order?my iphone got wet with the perfume... and its got dark spot on the back of lcd but it is still working. do i need to change my lcd or do i need to wipe the lcd ?
rein9069 1 year ago
You are unable to afford iphone? Check out giveaway at gifter7 . com Take your chance NOW
I like it
LeslieYoungs 1 year ago