@thesep333 zum hundertsten mal.. alle videos die mit nem handy aufgenommen wurden liefen früher (bis ende 2008) problemlos und flüssig. dann wurde youtube von google aufgekauft und die haben angefangen rumzubasteln... und seit dem sind sämtliche hochgeladenen .3gp handyvideos nurnoch ne dia-show.
Ich kann da nix für. Und wenn ich das originale video noch hätte würd ichs umwandeln und nochmal neu hochladen.
@Officer94 mich hat einfach mal interessiert wie der core von nem alten P4 aussieht. also hab ich den lahmsten P4 genommen den ich hatte (1,4GHz Willamette) und mit nem schraubendreher den heatspreader abgehebelt.
war neugierig ob er eventuell sogar noch funzt und habs ausprobiert. wie man sieht funktionierte der trotz deutlich in mitleidenschaft gezogener oberfläche noch ^^
dauerhaft benutzen würd ich sowas nich und hab ich auch nicht.
hab ich auch damals gemacht mit meinem pentium 4 1.6 ghz XD war eh egal mainboard hab ich eh weggeschmissen^^ aba mit meinem jetzigen core 2 quad mach ich das lieber nicht ^^
you know if you used thermal paste to bridge thermal conductivity from the CPU to the heatsink, your temps would drop a lot. I used to run a P4 Willamette, similar to that with an all copper heatsink, kinda similar to your heatsink, and my temps never got above 45C. should actually run cooler without the heatspreader.
@sanderson i just pried it off with a small flathead screwdriver. i was curious about what it looks like underneath, and it was my slowest P4, so i didn't really care..
just for fun i tried if it still worked afterwards, despite the top being damaged quite a bit.. as you can see.. it did :O
wtf hast du's mit nem taschenrechner aufgenommen oder was kauf dir ne kamera
thesep333 9 months ago
@thesep333 zum hundertsten mal.. alle videos die mit nem handy aufgenommen wurden liefen früher (bis ende 2008) problemlos und flüssig. dann wurde youtube von google aufgekauft und die haben angefangen rumzubasteln... und seit dem sind sämtliche hochgeladenen .3gp handyvideos nurnoch ne dia-show.
Ich kann da nix für. Und wenn ich das originale video noch hätte würd ichs umwandeln und nochmal neu hochladen.
Knaeckebrotsaege 9 months ago
@Knaeckebrotsaege na dann danke das es mir jemand endlich gesagt hat ;)
thesep333 9 months ago
reine neugierde oder auch sinvollen nutzen? :-)
Officer94 10 months ago
@Officer94 mich hat einfach mal interessiert wie der core von nem alten P4 aussieht. also hab ich den lahmsten P4 genommen den ich hatte (1,4GHz Willamette) und mit nem schraubendreher den heatspreader abgehebelt.
war neugierig ob er eventuell sogar noch funzt und habs ausprobiert. wie man sieht funktionierte der trotz deutlich in mitleidenschaft gezogener oberfläche noch ^^
dauerhaft benutzen würd ich sowas nich und hab ich auch nicht.
Knaeckebrotsaege 10 months ago
@Knaeckebrotsaege achso. also der core des p4 hätte ich mir auch nochmal etwas kleiner vorgestellt, ungefähr sogross wie beim p3.
Officer94 10 months ago
hab ich auch damals gemacht mit meinem pentium 4 1.6 ghz XD war eh egal mainboard hab ich eh weggeschmissen^^ aba mit meinem jetzigen core 2 quad mach ich das lieber nicht ^^
MrWindows7Ultimate 1 year ago
war einfach nur zum spass ;D
war der lahmste P4 den ich hatte.. hab einfach probiert den heatspreader abzuhebeln..
aus neugierde danach probiert ob der prozz. noch funktioniert... tat er .. :D
(auch wenn die oberfläche alles andere als toll aussah... vom hebeln halt)
Knaeckebrotsaege 2 years ago
Was hat das für nen sinn??
Is ja ganz lustig, aber ich glaub nich, dass der spreader zum spass da druf sitzt.
XTwina 2 years ago
Nice... so you added the copper base to the bottom of the heatsink... was that hard to do???
kenmha 3 years ago
What's that on the bottom of the heatsink you're using? Looks like a copper add-on from another cooler thingy.
kenmha 3 years ago
thats just the copper base.
a copper plate screwed onto that aluminum heatsink.
it's a Thermaltake TR2-M3 (socket A) ;)
Knaeckebrotsaege 3 years ago
Comment removed
rijo14 3 years ago
Aslong as the heatsinks tochs the CPU it will be fine, P3 didnt have heat spreaders on them
slaterking1000 3 years ago
you know if you used thermal paste to bridge thermal conductivity from the CPU to the heatsink, your temps would drop a lot. I used to run a P4 Willamette, similar to that with an all copper heatsink, kinda similar to your heatsink, and my temps never got above 45C. should actually run cooler without the heatspreader.
bikegeekccp 3 years ago
how the hell did you take off the heat spreader?
sanderson 3 years ago 3
@sanderson i just pried it off with a small flathead screwdriver. i was curious about what it looks like underneath, and it was my slowest P4, so i didn't really care..
just for fun i tried if it still worked afterwards, despite the top being damaged quite a bit.. as you can see.. it did :O
Knaeckebrotsaege 1 year ago
thats an asus boardall right
sanderson 3 years ago
nope
Gigabyte GA-8IDX (a.k.a. "P4 Titan") ;)
Knaeckebrotsaege 3 years ago