thx for the reaction, i just want to close the loop, and have a extra coil to power a light, thats all. Do you think i can get a close loop? so efficienty=1?
john Bedini hasn't closed the loop yet on this type of motor generator, Google window motor you will find one of his designs that is closer to a close loop. There are things about this design that are unconventional, the positive of the power batter is connected to the negative of the charge battery this is to allow the radiant energy to flow back at the end of the pulse, many have tried to close the loop but no success yet.
Yes a micro possessor controller would be a benefit we are experimenting using software and a stepper motor controller, to control start up and load nothing ground breaking yet but there is always tomorrow. creating a Bedini type motor with excessive torque to run a generator is what many people are working on.
The reason you need batteries or Caps is to buffer the 120V radiant energy spikes these spikes can be even higher it will fry your chips even in perfect system, without batteries? this is not a good idea, check out my video Bedini SG Type Motor P1 it is a good look inside. There is allot of good Information on John Bedini's motors before I started I did allot of research. hundreds of people have reproduced his work that is the best way to understand this concept. then you can modify it.
Can you also measure the amps it draw when the magnet is not close to the coil. Please make this measurement for me thanks. I would like to calculate something. I mean in standing position.
nice. I like bedini style. But problem with this is that it fires all the time, even if magnet is away from coil. Try to skip bedini cercuit and use insted a reed switch. Then the efficiency is far more greater. Also dont use coils to pick up magnetic current. Use a rectifier and connect it parralel to the reed switch. Then give the battery the rectified DC. I give you 5 stars.
Thank for the rating, But the coil does not fire all the time, only when the trigger is directly in front of the magnet and only for a fraction of a second. If it was on all the time the magnet would not pass the coil it would stop. I tried a reed switch but it was not as fast as a transistor, with this setup I can charge Batteries at any voltage I wish and it works great.
Check out some of my other Videos, the motor controller can instantly create hundreds of Volts with enough amps to be useful I'm sure both designs have merit.
Are you sure that it fires only when the magnet appear? Have you tried the oscilloscope or multimeter? Plz try it. Also important thing is not to go high rpm. The radiant energy can only not be generated by a mechanical switch like a reed switch. If you use transistor then no radiant energy is generated i think. So try to look for Ed Grey device. He used also a mesh around the spark. A spark is only their if switch is generated.
Yes it Fires only when it is in proximity of the Manet there are Fake transistors and defective one that do not shut completely off It is important to test them even if there new, I built a rig that is a small wheel to test them because this is a big problem, we are working in small millamps and the transistors are designed to work in amps so millamp bleed doesn't seem to be a issue with some manufactures.
radiant energy can be generated with transistor but it must completely shut off or it will not work, my early work was with reed switches but the switch is not as fast as a transistor the gating creates the radiant energy not the type of switch Bedini proved this in the 80's
how to you test what transistor shut off completly? Can you suggest me one or some of them with high voltages and high amps as well. Or some that shut off completly only. Thank you very much for your reply it helped me to understand more.
standard tester only checks the trigger voltage and the on state not the voltage leakage I will send you some links direct can't post links in the comments I hope they help
sweet.
xxxxxseesu24 3 years ago
thx for the reaction, i just want to close the loop, and have a extra coil to power a light, thats all. Do you think i can get a close loop? so efficienty=1?
propet2 3 years ago
Hello, great vid!!
i want to built a bedini motor myself, eventualy to create a closed loop.
For the swithing and pulses to the motor i want to use a micro controller pic+eeprom.
Have you ever trided this? Or have any sugestions?
first i want to try to swith the 2 batteries by the micro prossessor, then i want to use the radiant energy to work without batteries.
propet2 3 years ago
thanks
john Bedini hasn't closed the loop yet on this type of motor generator, Google window motor you will find one of his designs that is closer to a close loop. There are things about this design that are unconventional, the positive of the power batter is connected to the negative of the charge battery this is to allow the radiant energy to flow back at the end of the pulse, many have tried to close the loop but no success yet.
zeropointfuel 3 years ago
Yes a micro possessor controller would be a benefit we are experimenting using software and a stepper motor controller, to control start up and load nothing ground breaking yet but there is always tomorrow. creating a Bedini type motor with excessive torque to run a generator is what many people are working on.
zeropointfuel 3 years ago
The reason you need batteries or Caps is to buffer the 120V radiant energy spikes these spikes can be even higher it will fry your chips even in perfect system, without batteries? this is not a good idea, check out my video Bedini SG Type Motor P1 it is a good look inside. There is allot of good Information on John Bedini's motors before I started I did allot of research. hundreds of people have reproduced his work that is the best way to understand this concept. then you can modify it.
zeropointfuel 3 years ago
Can you also measure the amps it draw when the magnet is not close to the coil. Please make this measurement for me thanks. I would like to calculate something. I mean in standing position.
Subspace4d 3 years ago
One more thing. Can you send me the shematics too? Or do you use the standard shematics also.
Subspace4d 3 years ago
nice. I like bedini style. But problem with this is that it fires all the time, even if magnet is away from coil. Try to skip bedini cercuit and use insted a reed switch. Then the efficiency is far more greater. Also dont use coils to pick up magnetic current. Use a rectifier and connect it parralel to the reed switch. Then give the battery the rectified DC. I give you 5 stars.
Subspace4d 3 years ago
Thank for the rating, But the coil does not fire all the time, only when the trigger is directly in front of the magnet and only for a fraction of a second. If it was on all the time the magnet would not pass the coil it would stop. I tried a reed switch but it was not as fast as a transistor, with this setup I can charge Batteries at any voltage I wish and it works great.
zeropointfuel 3 years ago
Check out some of my other Videos, the motor controller can instantly create hundreds of Volts with enough amps to be useful I'm sure both designs have merit.
zeropointfuel 3 years ago
Are you sure that it fires only when the magnet appear? Have you tried the oscilloscope or multimeter? Plz try it. Also important thing is not to go high rpm. The radiant energy can only not be generated by a mechanical switch like a reed switch. If you use transistor then no radiant energy is generated i think. So try to look for Ed Grey device. He used also a mesh around the spark. A spark is only their if switch is generated.
Subspace4d 3 years ago
Yes it Fires only when it is in proximity of the Manet there are Fake transistors and defective one that do not shut completely off It is important to test them even if there new, I built a rig that is a small wheel to test them because this is a big problem, we are working in small millamps and the transistors are designed to work in amps so millamp bleed doesn't seem to be a issue with some manufactures.
zeropointfuel 3 years ago
radiant energy can be generated with transistor but it must completely shut off or it will not work, my early work was with reed switches but the switch is not as fast as a transistor the gating creates the radiant energy not the type of switch Bedini proved this in the 80's
zeropointfuel 3 years ago
how to you test what transistor shut off completly? Can you suggest me one or some of them with high voltages and high amps as well. Or some that shut off completly only. Thank you very much for your reply it helped me to understand more.
Subspace4d 3 years ago
standard tester only checks the trigger voltage and the on state not the voltage leakage I will send you some links direct can't post links in the comments I hope they help
zeropointfuel 3 years ago
hell yeah
rc69wc 3 years ago