@3r1k510 yes but not right,. if u use foil use the un shiney side sounds weird yes.. your better off with mralite, ( shiney as fuck sliver stuff ) reflectes light awesome, or white plastic be better
@3r1k510 from some selceted building supply shops, mayb ur nursey, or there should be a local grow shop near u that should help , maybe pull out your phonebook n look up hydroponics... hope that helps
@intuneter Once again its said in the video and other sites, mate do some research, growers usally do it once a fortnight, but some fussy people do it once a week !!
@MrSmokingKronic Hey dude. I noticed you are giving out good advice on these vids and I have a question I cant seem to find an answer for. Just got myself some new gear, using a 400w hps, but my ballast is 600w. It is a dimmable ballast, can set it to 50,75,100% or S-bright. If I have the ballast set to 100%, the temp is way to hot for plants, but if set to 50% the temp is just right. However I'm not sure if having it at that setting is giving the plants the correct level of lummens they need?
@1brutaldeath if it was me i would crank it all the way up, and MAKE sure i have plenty of moving air in my room and fan blowing it out.. make sure you keep the water up to her.. I grow buy using clones, its much easier quicker n better.. P.S get yaself a " water heater probe " i like to keep my res at 24degrees
@MrSmokingKronic Thanks dude, well we are going to make a channel to upload some vids kinda like Mr Green here. Except our vids will be more looking for advice than giving advice. Well I suppose we will have some advice for beginners, but advice from more experienced growers would be great. Will need to add you when we set up the channel, thanks again for the advice.
@1brutaldeath thats ok.. i start my cloned inch cubes till they are rooted then transfer em into netpots till they r rooted, then they go into my bigger pots which is grown for a further week then switched to bud, the plant still does grow alot while flowering
which system would be best for growing and flowering in one room
was thinking the evanflow system
WIGREEN101 7 months ago
@WIGREEN101 anything u want and can manage yaself easily enough
MrSmokingKronic 7 months ago
hey i forgot this the size of the light shade , is it a t5,t8,or t12
MrGator1964 7 months ago
in the veg area what size are the lights? are they the 2700's are they the 6500's?
MrGator1964 7 months ago
can you use the shiny side of foil to reflect light?
3r1k510 8 months ago
@3r1k510 yes but not right,. if u use foil use the un shiney side sounds weird yes.. your better off with mralite, ( shiney as fuck sliver stuff ) reflectes light awesome, or white plastic be better
MrSmokingKronic 7 months ago
@MrSmokingKronic where would you get that type of material?
3r1k510 7 months ago
@3r1k510 from some selceted building supply shops, mayb ur nursey, or there should be a local grow shop near u that should help , maybe pull out your phonebook n look up hydroponics... hope that helps
MrSmokingKronic 7 months ago
@MrSmokingKronic alright thanks appreciate the help
3r1k510 7 months ago
@3r1k510 your welcome my stoner friend
MrSmokingKronic 7 months ago
He said he waters 3 times a day but, for how long ???? 5 mins? 10 mins? 20 mins? exactly how long should u water them ??
THADOUGHBOY15 8 months ago
How often do you change the watering solution?
intuneter 9 months ago
@intuneter Once again its said in the video and other sites, mate do some research, growers usally do it once a fortnight, but some fussy people do it once a week !!
MrSmokingKronic 9 months ago
Can some one please tell me where can i get those timers
602arizonaking 9 months ago
@602arizonaking depends were you from from... Bunnings warehouse, mitre 10. any home and garden center or flower shops, or building supply shops!
MrSmokingKronic 9 months ago
what kind of pump do you use?
Livinthedream19 10 months ago
@Livinthedream19 submerisable pump, " water pump that can go underwater " 50watts do 3 plants
MrSmokingKronic 9 months ago
@MrSmokingKronic Hey dude. I noticed you are giving out good advice on these vids and I have a question I cant seem to find an answer for. Just got myself some new gear, using a 400w hps, but my ballast is 600w. It is a dimmable ballast, can set it to 50,75,100% or S-bright. If I have the ballast set to 100%, the temp is way to hot for plants, but if set to 50% the temp is just right. However I'm not sure if having it at that setting is giving the plants the correct level of lummens they need?
1brutaldeath 9 months ago
@1brutaldeath if it was me i would crank it all the way up, and MAKE sure i have plenty of moving air in my room and fan blowing it out.. make sure you keep the water up to her.. I grow buy using clones, its much easier quicker n better.. P.S get yaself a " water heater probe " i like to keep my res at 24degrees
MrSmokingKronic 9 months ago
@MrSmokingKronic Thanks dude, well we are going to make a channel to upload some vids kinda like Mr Green here. Except our vids will be more looking for advice than giving advice. Well I suppose we will have some advice for beginners, but advice from more experienced growers would be great. Will need to add you when we set up the channel, thanks again for the advice.
1brutaldeath 9 months ago
@1brutaldeath thats ok.. i start my cloned inch cubes till they are rooted then transfer em into netpots till they r rooted, then they go into my bigger pots which is grown for a further week then switched to bud, the plant still does grow alot while flowering
MrSmokingKronic 8 months ago
ur the best mr.green
thekid4hell 11 months ago
i love you O.O
darktorch5 1 year ago
why do u use a blue spectrum?
in german we use at the budd-time red/orange spectrum?!?!
deimuadda999 1 year ago
ty
GUERAHU 1 year ago