Overunity Pulse Motor Bedini type 1

[subhankar8925]

Very nice! I enjoyed your video probably alot more then you...LOL!

There is an Engineer from Boston - his name is

John Richard and he own a website where he gives you

a lot of details about the magnetic generator

look for him in Google - use this to Search...

Best Magnetic generator or top magnetic generator

[bearpatch626]

NEW COMPRESSED POWER G-21

[alienhddna]

this look a lot like the seg motor

[TheKaos90]

@ 2:10 , bad idea if the voltage was higher , you'd get pretty nice and toasted . Are your coils bifilar ?

[ulquirathebatespada]

you can hookup and automatic battery switcher and wallah....

[TheKaos90]

@ulquirathebatespada the best thing you can do is some switches that are manual , you cannot add circuit relays to do what you suggers , because if it would be possible ,it would work with capacitors , no batteries and it will generate lots of power

[Arti495]

To all those who say this goes against the laws of Physics.

remember every law is meant to be broken sooner or later.

[lhakvoort]

can you send me a scematic of this bedini motor and part names which you u used for it please

[ArcaneInquisitor]

Can anyone explain this circuit with mathematics? All I can find are qualitative descriptions. Or if you have built one yourself and tested it, do you have a report of your experimental method and a summery of the results? If you do I would gladly read it.

All I want is a formal description.

[chriswatkins22]

What battery switching/voltage detection circuit are you using or how/what did you make your with? you know i sometimes often wonder if the human body could be considered an overnuity device as when you sit around and do nothing you body is storing the energy that its making for when you do get up and do something if that makes sense, if not dont mind me, lol i have crazy ideas lol

[a68rebel]

Have you collected your $100,000 dollar price for producing an overunity motor?

[adjuk]

Fabulous - well done - this is the first itme I have seen someone using a battery switching circuit. Congrats

[chermonaraine]

I love how all/most of your stuff is hand made. Its a classic look, and makes it easier to understand.

[gmcjetpilot]

What are the specs, rpm, torque, current or power draw?

There is no way this is "free power" if that is what I think he is saying. It is against the laws of physics. This is akin to the perpetual motion machine. Scam. Take those battieris out and it would stop.

You are saying it is running on its own? Don't get it. There are loss in the wire (heat), rectifier diodes are not 100%, capacitor and friction of the rotating parts to name a few reasons it can not MAKE power. Theres no free lunch.

[theDaftman]

No perpetual motion no overunity and nothing of the sort clamed.

It was my attempt at the above thats why I named is project Overunity Pulse Motor Bedini type 1.

The BEMF from the first pulse unit (coil) runs the second coil.

Bit it was very efficient,

The unit did charge 2 batteries from 1, now that sounds like perpetual motion no its not I had to swap the battery to keep it running.

[theDaftman]

Please see all peoples videos before branding them as a Scam.

Overunity Pulse Motor Bedini type 2

Overunity Pulse Motor Bedini type 3

See this video you will see that i clearly say it want work and cannot work.

Overunity Pulse Motor Bedini type 4

[theDaftman]

Remember

1. The world was flat once.

2. If we went over 30mph one would suffocate.

3. Its impossible to put man on the moon.

Every thing will be done and every thing will be disproved like it or not.

[electrodacus]

@theDaftman Not everything, you can not get something from nothing.

You can convert energy from one form to another but you can not get more out that you put in.

[acrophobia123]

@theDaftman This is by far the best comment I have heard. I have been working on a few bedini motors over the last few years. I started a forum on the topic and got nothing but grief saying you cannot make power. This is very true just because we dont know something to exist from our current scientific understanding doesn't mean it doesn't exist.

[acrophobia123]

@theDaftman A bedini type motor is not creating energy, it is only harnessing freely available energy, energy that is all around us known as radiant energy. Tesla discovered it back when he was using DC power with thomas edison. The switching on and off at the power station was killing linemen standing on the ground. The switch created a "vacumn" and drew out radiant energy

[Texmurphy51]

Why not eliminate the battery swapping by rectifiying and filtering the output, then feeding it into the input. The device would run and you could run a light bulb from it since its overunity. Swapping the battery simply runs the device on the charged battery. It will eventually run down, quicker if an external load is hooked up.

[ccandb]

@theDaftman

I love your stuff.....straight forward, and fun!

Dont worry about people like gmcjetwhatever....he wouldnt know radient energy if you stuck a stick up his backside and lit it on fire. Great Job on the coils! The narrow minded have no idea about how this swapping of batts can be scaled up to run a house off grid....their loss in paying for pumped energy that they could produce themselves! Happy new year! Keep at it! :)

[sonyspark]

yo dude the problem with your batteries is that you have them oin ground. Never put a battery on ground because it drowns the chagre tp the erath!

[Anothercoilgun]

Possibly only if the load is earth grounded and the battery in on an actual earth ground, otherwise, thats just mis information.

[dajlrj]

r u stupid? current needs a complete circuit from pos - neg to flow. puting on the ground wont do shit. who told u this shit? stop listening to them

[NTKsuckit]

thats only when its on the cement and if the table is wet

[salzahrah]

lmfao

[DavidAKZ]

Sorry, bit confused. Can you say how this system is overunity ? I don't understand the function of the batteries- thanks

[MrWombatPPC]

Dude, MAKE ME ONE !!!! Ive got a Use for it.

[jobfromdayone]

Daftman you are my hero. May have a copy of the plans that you used to create your motor?

[splay2009]

Hi,

Well done, I have built one of these and am looking to do the switching. Change the soure with the accumulator when the source runs low. I also want to fire up the fan when the accumulator runs low.

You mentioned you had done that, do you have any advice on how I could do it?

Thanks

P.S. for all the so called experts dismissing it, try building one and see what happens.

[payneinc2008]

ya great but u need 14.4 volts to charge a 12 volt battery correctly because of resistance from the lead battery lugs and wire duh so over charging is not a problem same as your car it says 12 volts but actually when the car is charging it charges at 14.4 volts thank you

[theDaftman]

Yes but i was not using car batteries on this setup. The batteries stated on them,

Do not exceed 13.8 volts. Use manufactures charger only.

I totally dismissed that and f*** 4 of then at £21.00 each + the Vodka And Tonic.

[payneinc2008]

hey i was just wondering if you used say deep cycle battarys on this and what your amps would be

[SilverFirelancer]

the free energy is formed when the dipole in the battery is kept intact, read your Bedini Theory...

NO SOUP FOR YOU!!!

[electrician725]

yeah. what he said!

Read Tom Bearden's explanation of what this does, batt's are necessary. Or at least capacitors.

[jon95772]

I've made 2 bedini circuits. Both circuits worked for a while, but stopped running after a few hours. The first one, neon continued to flash with the charge battery connected, no measureable voltage, going to the ch batt. The 2nd circuit won't stay running anymore, it's as if it's not getting enough pwr to drive the coil. Would be thankful for any advise

[boobtube713]

can't seem to post the web site address but the name is free-energy-info.

[boobtube713]

I'm very interested in using for the same purpose as you did or if you could post the name of the circuit so I may try to find it on my own that would help too.

Thanks and again this was great video and very interesting design.

P.S. In the other material that I found researching this the batteries once "conditioned" should be able to hold much higher voltage then what is stated/recommended by the manufacturer with "no ill effects". One of websites that gave me the ---Continued in next post---

[boobtube713]

Great video I tend to think that the speed variance has something to do with the second coil alignment as stated by aaronjehall. I wanted to ask about the switching circuit, so as I understand it the customer that you spoke of bought both the circuit and the rights to the design so you can't reproduce it with out permission, and if that's correct could you pass along my info so that the customer can contact me so I may purchase one or more of these circuits as ---Continued in next post---

[angelgkd]

Hello Daftman. I have watched every video you have made and am impressed. This one in particular got my attention, since you said that "it has been running for months". I just don't understand why you have not attempted to make a power in versus power out measurements. What is the point of running the unit for months when you can draw the same conclusions in a matter of minutes. As someone already recommended before me, show voltage @ current into/out of each battery. Thank you in advance.

[aaronjehall]

I bet if the coils were opposite each other the motor wouldn't fluctuate(slow down and speed up). how bout building one that needs no batteries, and runs on its own power?

[alastair78]

haha its slowing down as we watch

[johnrc1961]

Don't dismantle it, as I would buy it off you.

That is if it is not too expensive :o)

[theDaftman]

Sorry this one has now been recycled. Please see this video this is where its parts have been used.

Just a test run of double generator.

[NEON271156]

nice one, they say imitation is the Suttle form of flattery, and i just found my new project, build one oo these.this is a really well thought out unit... nice one. thom scotland.

[Karlfalcon]

Subtle.

[bubbi316]

all i no is that when u put little power to magnet u get alot bac

[freeenergyreserch]

Please help, I nead the plans for the ssg multicoil , tnx.

[vidmantasdd]

Possible free energy from magnetic motor is,that must be inductor coil (non ferro,without core) between permanent magnets to minimize attraction or repulsion between permanent magnets.And I never seen on internet electromagnetic motor,were inductor coil is between permanent magnets.

[usicman2k]

The Bedini wheel is amazing in itself and your version shows you understand much on this. I appreciate the youtube community illustrating overunity. It can also be quite simple with a Newman motor and a similar circuit. At least a higher success rate from my experience.

Thanks Daftman, I've appreciated your vids for a while now.

[axe863]

@usicman2k If you think over-unity is possible.... I have a unicorn for sale

[dodoshlodo]

hey heard u weren't too well atm Daftman, hope you get better soon

[gabydewilde]

Very cool, good description also. Thanks

[amen2233]

sounds more like a rotary phase converter

[dodoshlodo]

why 3 coils wound on each coil?

[theDaftman]

The original intention was to have 1 winding for run, 1 to trigger, and the next 1 for generating.

[nasanction]

I would like to know more on how you made your reed switches and your automatic switching of the primary and secondary batteries for maintaining the charge. Nice work Daftman!

[grodenbarg]

interesting device. imagine the uses. :D

[zeroPointZeroEight]

Thank you for sharing this! I am sure it will encourage many to become enquisitive as well - and who knows what may come of it.

[larrylawrencejr]

Very nice! I enjoyed your video probably alot more then you...LOL! Thanks again for the video I appreciate it.

larrylawrencejr (dot) (com)

[purplenoise2002]

it would be better if you had a power meter or current meter for each of the batteries. Voltage alone does not tell us the whole story. Then we can determine what's going on. Even better if you could demonstrate that the battery receiving charge is taking more power than the battery driving the motor.

[AdamsMotorGenerator]

This motor generator type is not from bedini, but from Adams, the real genius. Bedini copy the motor and create a patent with it. If you want overunity you have to look to adams. My Adams motor replication runs overunity at about 250v and 0,029A and runs cold. Automatic swap batteries and Self running at about one year!

[purplenoise2002]

If that's true, how come you don't have a video of your supposed adams motor running? a video is worth a million words.

[zintoit]

Would you kindly post the schematic or means by which you switch batteries.

[AdminOnDuty]

While watching this it made me ponder...can we do this with no moving parts? Steven Marks was able to rotate a magnetic field with no moving parts and extract about 800 watts from the earths magnetic field. I wonder if we could do something similar with your pulse coils and a round robin coil to replace your rotor. Just thinking out loud here.

Keep up the good work!

Cheers

[txgiorgi]

I was able to jump so high I landed on the moon.

Grow up Admin.

[AdminOnDuty]

I know your a liar from that statement. But I can definitely jump higher than the Empire State building.

I refuse to grow up - it's more fun this way.

[theDaftman]

Yes. But I want to finish all my mechanical work before moving on to solid-state.

[AdminOnDuty]

Your reputation is solid with us. Your workmanship is excellent and your delivery was refreshing. I have seen the lead-acid problem before because lead sulphate builds on the plates when the battery is discharged for even 24 hours. This coating is non-conductive and makes it very difficult to recharge the battery. NiCad batteries also have a strange memory requiring them to be fully and completely discharged prior to recharge. Try Lithium Ion batteries.

[overunitydotcom]

Great work !

Please come to overunity dot com

and report your progress on your device.

Many thanks.

Regards, Stefan.

[theDaftman]

Sorry Stefan I would but I find the overunity dot com difficult to navigate around. I have looked but cannot find anything related all I can find is WhipMag of YouTube related things. Maybe a link to a pulse motor forum on the side menu may help. please keep up the good work.

[ashtweth]

Daftman, you are not only talented and creative and funny as hell, but your needed in this research, dont dismantle it and keep going mate. i still got tears in my eyes, and imagined a monty python script with the finger getting zapped in the cap. Now thats how you make videos.Now i can mke the PDf available for all on the panaceauniversity dot org site for FREE open sourced free energy research please email me mate when its ready. THANKS FOR DOING THIS RESEARCH MATE

[marthale7]

Would love to see a schematic of what you have done.

[theDaftman]

Ok but please give me time to sort it into downloadable PDF or something and find a host for the diagrams maybe a small website with all info.

[theDaftman]

The Schematic diagram used in this pulse motor, can be found on youtube under the name of

(Overunity Pulse Motor Bedini type 3 Diagram 1.)

[marthale7]

Very clean setup nice. So you let the voltage drop to what point before you switch back? say 14 V down to 11V ? before it switches back between the two? Thank you for sharing.

[rpraver1]

Very interesting setup.

Do you have a more detailed schematic of the circuit that you are using. I would also like to learn more of the setup under the board. I will send my email if you do.

[sceptic33]

if you are interested you can google u.s. patent 3913004 to can see his design and concept.the patent isn't on the U.S patent database, but is on the european one... odd.. he has a bifilar wound on the rotor, but the same principle could apply to a stator coil with permanent magnet rotor... would like to know what an open minded electronics engineer or physisist makes of the idea. i plan to test it on my motor as soon as i can borrow an oscilloscope to measure the power in and out of the coils

[introvertebrate]

Very nice! Shame you are going to take it apart :(

[theDaftman]

Well the more I play around with this idea the more I'm intrigued, so with that in mind I'm going to be playing around a bit longer with it. Thanks for your comment.

[sceptic33]

nice work. not sure that i understand why you need the reed switches if you are using trigger coils and transisters to do the switching..any chance of a circuit diagram?..i'm planning on replacing my reed switch with a bedini type trigger coil in an attempt to reduce the pulsewidth. what do you make of the design by Robert Alexander? it uses bifilar coil as a transformer, spinning a rotor while also outputting any primary input power through the secondary coil.3rd coil as trigger would be nice

[sceptic33]

any chance of seeing your battery switching circuit too?..

[theDaftman]

Sorry for not explaining this in the video. After all my testing of a battery switching circuit was completed. My goal was to make the unit run with capacitors only and I needed to be able to adjust the timing. But that was unsuccessful. Now with the set up as it is it pulses 3 times for every revolution but originally I only wanted it to pulse once for every revolution but if I used the trigger coils I had no control over this.

[theDaftman]

But as I now pulse 3 times per revolution with the magnets I suppose I can use the intended trigger coils instead. But if I do this I probably won't be able to use the trigger coils for charging. Please see the next video on this (Overunity Pulse Motor Bedini type 2) you will be able to see what I'm trying to say about charging.

[theDaftman]

But as I now pulse 3 times per revolution with the magnets I suppose I can use the intended trigger coils instead. But if I do this I probably won't be able to use the trigger coils for charging. Please see the next video on this (Overunity Pulse Motor Bedini type 2) you will be able to see what I'm trying to say about charging.

[theDaftman]

Now for the battery switching circuit. I will try to post this somewhere on the net soon but you have to understand that the pulse motor was only built by me to test the battery switching circuit for a customer as this is what the switching circuit was to be used for. So that means the customer has paid me for the work and the design. So what I am trying to say if the customer is ok with me posting it I will, if not I will post some kind of alternative.

[theDaftman]

Sorry I have not seen Robert Alexander work.

Dam the 500 word limit.

[crob227]

great setup have you tried charging multiple batteries, if you have enough torqe which im sure you do you can run a dc motor off a rubber band and get some extra current,then take wattage off the dc motor loaded down with a christmas tree light, and see if the run amperage increases, you will be amazed ----another hint---- 5 stars