@eelguy95 na i wish I got as much attention on here to not like it but then again i would like it lol. cause i love to help people with their work and i dot here much from people. but thanks man glade you like my vids!
ok so if i dont have pecks do i mesure brest to brest an how would be the best way to go about mesureing for that ??????an yes im being a smartie .... love the video
@wadeankary haha well that sounds like your going to need help measuring your self im all hands lol lol but na it should be the same cause of how big my pecks are there like tits lol lol but seriously when you go to measure them the way I would do it is to do hand widths that will be the most accurate and fulfilling lol. you might do some clenched ones in the middle to make up for the rise. cause if not it will be to wide and youll have a rise below the belt lol SRY had to lol left it open
english wheel helps with this a lot allows you to get nice curves in your armor, but as it looks like your going for the more rustic look, i would say pretty sweet armor dude
@warmachine655 yeah them things are freaken awesome wish I had one and knew how to use it. yeah was just trying to make it with what I had so rustic is what came out. but yeah thanks man Im glade you liked it.
@Spyrodrawer I use normal most every day steel not sure exactly the id number for it. but it is 14 gauge reall sturdy stuff. next suit will be stainless though tired or oiling them up every once in a while. thanks for the question>
hey, i am going to attempt to make some armor for a costume for halloween this year, going to go all out, and was wondering if you could make a tutorial video on how to make the different pieces for a suit of armor. I especially need help with the gauntlets. I saw your other video that showed the gauntlets you made. If you could do a video on how to make gauntlets kind of like that, then that would be much appreciated. Thank you.
@Comicwriter232 ok i will see what I can do. i was actually planning to remaking them I dont like how they are not articulated at the wrist so i am soing to re do them so yeah might be able to do that here soon. but ill try.
yeah thats cool man. yeah I do some carbon steels well I add carbon to them by quenching in oil and things of that nature. but yeah thats cool do you do any forging? Id like to see some of your work always open to new ideas and ways of doing things.
yeah i could no prob. but yeah it is pretty awesome but not exact I was 15 when I made it lol but yeah ill see about getting a vid on here if I dont with in the next few days just remind me
a vice for sure it helps a lot for forming round parts like the arms , a rivet gun or just buy hammer rivets, the ball pein will work ok but the only problem with using it is the dents it puts but with cold forming you get a lot of dents you just have to get a sanding dics for a mini grinder and it works great for getting them out
ok. also what do i need to start armouring? i have almost finished a crappy breastplate and the only hammers i have are a ball pein hammer, and.. i think some kind of roofing hammer.
yeah those hammers will do fine for just starting out and don't worry about what you end up with its what you learned getting there that counts on your first suit so crappy is actually really bad ass. one thing just make sure your hammers are smooth if not grind them smooth this will reduce the amount of dings in the medal if you need any other help just ask
ok yeah Ill try but I might have to wait to see if I got enough to do it and finish my new suit but once i start a new one there will definitely be more for sure
one place you can get it is from old water heaters there 14 gauge but you have to get all the formed glass off the in side but I buy it from my fathers job where he designs furnaces but if you go to buy it at lows or something you'll pay out the wazoo for it
yeah my vid cut off so I explaned the rest in the descrition if you have any proublems with dents or any thing else just say and ill see about makin a vid for it ill try to make a vid explaining how to make the arms here soon
Wow it must suck to sign in to your youtube account...
eelguy95 2 months ago
@eelguy95 na i wish I got as much attention on here to not like it but then again i would like it lol. cause i love to help people with their work and i dot here much from people. but thanks man glade you like my vids!
welfklfbwibfkwbfeqwf 2 months ago
could you finish that video please?
madproductions2819 4 months ago
@madproductions2819 what do you mean. I have not seen it for a while so not sure what it is missing.
welfklfbwibfkwbfeqwf 4 months ago
ok so if i dont have pecks do i mesure brest to brest an how would be the best way to go about mesureing for that ??????an yes im being a smartie .... love the video
wadeankary 7 months ago
@wadeankary haha well that sounds like your going to need help measuring your self im all hands lol lol but na it should be the same cause of how big my pecks are there like tits lol lol but seriously when you go to measure them the way I would do it is to do hand widths that will be the most accurate and fulfilling lol. you might do some clenched ones in the middle to make up for the rise. cause if not it will be to wide and youll have a rise below the belt lol SRY had to lol left it open
welfklfbwibfkwbfeqwf 7 months ago
@welfklfbwibfkwbfeqwf you make good armor but that was a terrible explanation
Folkedahl 5 months ago
@Folkedahl yeah I need to take it off and do a new one. it was the first one I had ever done.
welfklfbwibfkwbfeqwf 5 months ago
english wheel helps with this a lot allows you to get nice curves in your armor, but as it looks like your going for the more rustic look, i would say pretty sweet armor dude
warmachine655 1 year ago
@warmachine655 yeah them things are freaken awesome wish I had one and knew how to use it. yeah was just trying to make it with what I had so rustic is what came out. but yeah thanks man Im glade you liked it.
welfklfbwibfkwbfeqwf 1 year ago
what type of metal do u use and how thick is it?
Spyrodrawer 1 year ago
@Spyrodrawer I use normal most every day steel not sure exactly the id number for it. but it is 14 gauge reall sturdy stuff. next suit will be stainless though tired or oiling them up every once in a while. thanks for the question>
welfklfbwibfkwbfeqwf 1 year ago
hey, i am going to attempt to make some armor for a costume for halloween this year, going to go all out, and was wondering if you could make a tutorial video on how to make the different pieces for a suit of armor. I especially need help with the gauntlets. I saw your other video that showed the gauntlets you made. If you could do a video on how to make gauntlets kind of like that, then that would be much appreciated. Thank you.
Comicwriter232 1 year ago
@Comicwriter232 ok i will see what I can do. i was actually planning to remaking them I dont like how they are not articulated at the wrist so i am soing to re do them so yeah might be able to do that here soon. but ill try.
welfklfbwibfkwbfeqwf 1 year ago
Beautiful armour in the background. Nice video though. Best regards, Greg
gswiaczny 1 year ago
@gswiaczny yeah thanks a lot man. yeah that one back there is my baby lol lol but yeah thanks for your comment
welfklfbwibfkwbfeqwf 1 year ago
how thick steel do you do use?
flamingamstel 2 years ago
14 gauge so its the real thing I sword fight in my armor and i have jousted so you know its real strong stuff
welfklfbwibfkwbfeqwf 2 years ago
i use a 2mm Carbon steel for armors
and 5 mm for swords
flamingamstel 2 years ago
yeah thats cool man. yeah I do some carbon steels well I add carbon to them by quenching in oil and things of that nature. but yeah thats cool do you do any forging? Id like to see some of your work always open to new ideas and ways of doing things.
welfklfbwibfkwbfeqwf 2 years ago
Don't suppose you could show the whole knight's tale armour could ya?
Bertziethegreat 2 years ago
yeah i could no prob. but yeah it is pretty awesome but not exact I was 15 when I made it lol but yeah ill see about getting a vid on here if I dont with in the next few days just remind me
welfklfbwibfkwbfeqwf 2 years ago
a vice for sure it helps a lot for forming round parts like the arms , a rivet gun or just buy hammer rivets, the ball pein will work ok but the only problem with using it is the dents it puts but with cold forming you get a lot of dents you just have to get a sanding dics for a mini grinder and it works great for getting them out
welfklfbwibfkwbfeqwf 2 years ago
ok. also what do i need to start armouring? i have almost finished a crappy breastplate and the only hammers i have are a ball pein hammer, and.. i think some kind of roofing hammer.
medievallover120 2 years ago
yeah those hammers will do fine for just starting out and don't worry about what you end up with its what you learned getting there that counts on your first suit so crappy is actually really bad ass. one thing just make sure your hammers are smooth if not grind them smooth this will reduce the amount of dings in the medal if you need any other help just ask
welfklfbwibfkwbfeqwf 2 years ago
please make more videos haha. maybe on how to make a breastplate? that'll help alot! 5/5. SUBSCRIBED!
medievallover120 2 years ago
ok yeah Ill try but I might have to wait to see if I got enough to do it and finish my new suit but once i start a new one there will definitely be more for sure
welfklfbwibfkwbfeqwf 2 years ago
5/5...but where did you get the sheet metal?
bpaintball1 2 years ago
one place you can get it is from old water heaters there 14 gauge but you have to get all the formed glass off the in side but I buy it from my fathers job where he designs furnaces but if you go to buy it at lows or something you'll pay out the wazoo for it
welfklfbwibfkwbfeqwf 2 years ago
yeah my vid cut off so I explaned the rest in the descrition if you have any proublems with dents or any thing else just say and ill see about makin a vid for it ill try to make a vid explaining how to make the arms here soon
welfklfbwibfkwbfeqwf 2 years ago
Thanx for the tut really looking forward for part 2 5/5
moefapie 2 years ago