MAYTAG 72 ENGINE TEARDOWN (PART 2)

[DRaysShop]

Well bro, you are definitely a red blooded American...... Ouch!

I can go for months and not one scratch, then bust every knuckle in less than a week!

[805ROADKING]

@DRaysShop Lol!! I had a pretty good run goin' myself until that happened!!☺

[userunavailable3095]

Oh, I saw that one coming buddy. I've done that a few times myself. Ouch!

[805ROADKING]

@userunavailable3095 Lol!! I hear ya!! It never fails!!☺

[creamofcardstv]

a vampire screwdriver

[805ROADKING]

@creamofcardstv Lol!! And it looked so tame!!☺

[larrythelookout]

I wanted to put my hand in the screen and pull that clip off lol. That can of Aero Kroil is the bees knees.

[805ROADKING]

@larrythelookout I wish ya could have, then I wouldn't have jambed the friggin screwdriver through me thumb!!☺

[RamblinAround]

The bleedin' just lets you know you're working hard enough. Piece of paper towel and some duct tape and your good as new. I started wearing gloves recently too. I just decided that continuing to let all those chemicals leech into my skin probably isn't a good idea.

[805ROADKING]

@RamblinAround Yeah even just having to scrub them with lye and agent orange and still not being able to get all the grease off!! That can't be good either eh!!☺

[iexploderacoons]

Put some windex in it and you'll be alright ole' buddy.

[805ROADKING]

@iexploderacoons It's OK now, I just had to cut it off to the first knuckle, gangrene started setting in!!☺

[iexploderacoons]

@805ROADKING You don't need it anyways. You may want to prevent infection so you might lose your hand. A pizza cutter will do.

[SuperKONR]

I dunno how many times I've promised myself never to pry towards myself and get my finger cut open, then have it happen the next day XD

Ol Maytag's lookin good, cant wait to see part 3!!

[805ROADKING]

@SuperKONR Thanks Buddy!! I had a feeling that was gonna happen!!☺

[vidman008]

Coming along good so far.. Hope our Thumb isn't too sore tomorrow... The next day is usually when those types of cuts Hurt the most.. Thanks for the video.

[805ROADKING]

@vidman008 Wasn't too bad!! It's healing pretty well!! thanks for checkin' it out Buddy!!☺

[TheFred1952]

I will send the link in a message

[TheFred1952]

did you know they sell the referbishd gasoline powered washers This place caters to the Amish

[805ROADKING]

@TheFred1952 That's a pretty cool website!! I wonder how many Amish have computers to order that shit online!!☺

[TheFred1952]

@805ROADKING I don't know but we have a very huge Amish community right in Ohio I have been to the Hardware it's even cooler in person

[carnivore10]

Another good video Everett, I know the "driver to digit" concept pretty well myself!..lol

I also use similar gloves everyday , all-day, when I'm working on forklifts. I use them more to minimize the need for the heavy hand cleaners when washing my hands so much from all the grease,gear ,and hydraulic oil. A few decades of daily hand washing with these new de-greasers 20 times a day, and your hands are pretty much a mess! Great video!

[805ROADKING]

@carnivore10 Thanks Tom!! Yeah I remember the ol' day, washing up with lacquer thinner and Trichloroethylene every day!! it definitely tears your ass up!!☺

[edzgarage]

Ah man I almost passed out! But look at you... right back at it!

I have to find that Kroil stuff.

[805ROADKING]

@edzgarage Kroil is the real deal, gotta use it sparingly at those prices!!☺

[boodoorn]

Blood is ratings, motor is gonna be a good one!

[805ROADKING]

@boodoorn Blood = views!! I just wish it wasn't my Blood!!☺

[AeroSport103]

Hope this mishap does not put you on the DL...8>) ) I can see the tears in Lil Racers eyes now from laughing so hard... Wrap it up with a paper towel and secure it with masking tape and you'll be good to go. Standing by for the next adventure...

[805ROADKING]

@AeroSport103 It's gonna take alot more than a major puncture wound and a mild case of tetanus to keep me down Buddy!!☺

[krazy45cat]

Those old motors are really something else .

[805ROADKING]

@krazy45cat yeah they're alotta fun to play with!!☺

[Needmorehorsepower]

hit the thumb with a wire wheel to clean it up a bit,this vid could double as a 1st aid vid lol

Very cool vidoe E i love that little 2 cylinder motor how many horse is it? what was it used for way back when?

[805ROADKING]

@Needmorehorsepower Ya kill me Dude, I almost died and you're making light of it!! They're 5/8 H.P. They were Made and used by Maytag on there washing machines for houses that didn't have electricity!! They were made from 1911-1952!!☺

[mbyr31]

Great job bud!

Be careful with those screw drivers...They'll screw ya every time! :)

I own rubber gloves, but for some reason, I just don't remember to put them on till my hands are already shitty.



[805ROADKING]

@mbyr31 Thanks Bud!! Did ya ever know something was gonna happen long before it does!! I knew as soon as I picked up that screwdriver I was gonna jamb it threw my finger, I just didn't know which one!!☺

[500passwords]

these videos will sure be helpful if i ever find me one :)

thanks for taking the time to show us how its done .

i really mean it , no wise cracks at all this time . lol

[805ROADKING]

@500passwords That's cool!! I just picked up another one yesterday!! a single cylinder model 92!! Maytags would be a piece of cake for you Buddy!!☺

[TheFred1952]

just goes to show you. you don't need a chain to get hurt working on this crap lol

[805ROADKING]

@TheFred1952 Lol!! Touché!!☺

[TheFred1952]

have you ever tried snap ring plyiers

[805ROADKING]

@TheFred1952 They're not strong enough!!☺

[TheFred1952]

@805ROADKING I know that but I was thinking of the leverage I like to think outside of the box any thing that will make life simpller

[automotiveDIY]

@TheFred1952 thats not a snap ring, snap rings have 2 holes in it to grab it with.

[ligebellbuckletn]

Blood and Maytags i know thats happen before.... Love the maytag videos Everett.  I SUBSCRIBED. Duck tape works well on small cuts thats what she said. If ya need any parts just let me know!!! *MaytagPartsKing* Tell Racer i said whats up with his channel?

[805ROADKING]

@ligebellbuckletn thanks Bud!! To bad you didn't have a video on taking that snap ring off, it might have prevented me from jambing a screwdriver under my fingernail, lol. Racer has been putting alotta hours in at work the past few months, he's been trying to put some vids up but just doesn't get the time. thanks for the parts offer, I'm sure I will be in touch with you!!☺

[josderedneck22]

Ur shure can be happy Racer wasn't there buddy !! He would had rolled over the floor by now i think....

[805ROADKING]

@josderedneck22 Yeah Buddy!! Racer would have loved that!!☺

[josderedneck22]

@805ROADKING Well u know what Dave allways say; Blood is good for ratings......

[INKEDisINSANE]

Do you ever use these small engines? Or just restore them?

[805ROADKING]

@INKEDisINSANE mostly just restore them and display them at shows!! But we are looking for a Bike to mount one of the maytags on!!☺

[WARFOX101]

The air mix tube you pulled out, what would you use to seal it back in to the block. or would you seal it?

[805ROADKING]

@WARFOX101 I usually don't seal the tube, but I do seal the jet!! I use GASOILA or any pipe thread sealer that is fuel resistant!!☺

[MagicCadillac]

Well, some places inside the engine are pretty clean and you can take it of pretty easy too. You are lucky that only the screwdriver bit you, imagine that other things bite you :)

[805ROADKING]

@MagicCadillac You got that right Buddy!! you don't know what the hell you're gonna find hiding in there!!☺

[TwinsTec101]

on tape blood :p 1:47

[805ROADKING]

@TwinsTec101 Lol!! Blood = views eh!!☺