@Chorma92, I think no more than 100 meters, its receiver and mostly rtf heli receiver are only park flyer type, not a full range receiver like in the r/c airplane
There are no changes, still factory default, but honestly, its gyro is not good, if you want to better single blade trainer, choose Walkera Uflys, yes it is 4ch fixed pitch, different than CP3
hi could you help me because when i want to start my dauphin up the blades dont move and the gears just i dont know what u call it in a heli strip? i have to pull the blades up and start the heli than the heli must always go up or the blades stop im a begginer and the fukin simulator from the fukin esky dosent work fuk it
I think the problem is came for your heli gears, please change the stripped main gears with the new one. Motor pinion may not touch the gear properly because there are some stripped teet on that gear. after change the gears, Please make sure the motor pinion touch it but not too tight, or your motor will burned easily
@ipin17aero yh i changed the gear a all the teeth on it were half the lenght but the whole shafts still go down umm how should i explain this the blades go like 1 cm down with the shaft's and so do the gears and than they strip i have to hold the heli upsides down and then put some throtle on and i can fly thx for the advice man really helped
You know, now I have Belt CP V2, so collective pitch. I want to have something to practise on, indoor /outdoor. CP3 head seems to me much easier than Belt´s.Motor is more powerful than FP2, but tail seems to be small, FP is larger. If you compare FP2 and CP3, which you would recommend to practise on?
To practice hovering only, i recommend to try honey bee v2, because the handling is nearly same with cp3, and if you crash it, it take more cheaper repairing cost than collective pitch heli. After you are mastering the hover with hbv2, then try your belt cp v2, you will found the hovering process is more easier than before. Trust me :)
Very nice advice. You know everybode tell me to buy FP2, but CP3 is the same price, so that is why I am trying to find out what is better for me. I just want to lear to hover and circles flying, so 3D is year in front of me :) Have you any experience with flying any kind of Belt CP? I think flying with my Belt is easier than HBFP, but HB is cheaper to crash.
i have belt cp v2 too, but i thing its handling is more harder than hbv2 due to higher headspead and you can hover it indoor because is too dangerouse
I have ordered my HBFPV2 already,so I am looking forward to learn on it.Of course simulator is need and I have ordered 6ch simulator.Exactly indoor flight is impossible for beginner,so that is why I ordred HBFPV2.Larger heli is better or stable it will be.But yes,T-Rex 500 is more stable than Belt, but price is 3x the Belt.I am just beginner trying to get into this hobby,but not as experienced to build my own T-Rex clone.Good luck with this hobby,post more videos of CP3 or other helis you have.
You can found three videos more on my youtube account. Please click on 'More from : ipin17aero' at the left side. There are Walkera Ufly, Walkera 4G6 and Trex-250 video. Next week i will post my honey bee v2 video
Have you any experience with Esky HB V2? I would like to buy this CP3 or FP2, but I would like to hear something from anyone who own CP3. Is the head design easy to repair?
I also flown Honey Bee V2 several times. This heli's head is fixed pitch rather than CP3's Collective pitch. For beginners, Fixed pitch is much more easier while repairing because we dont need to setting the main blade pitch like CP3. Then if your skill increased, please go to next level to collective pitch heli like CP3. For flying characteristic, both helis near the same, but i thing HBV2 is much easier to hover and more saver to play indoor because it has lower main motor rpm.
what size heli is this? 400?
youronlycow 2 months ago
Comment removed
Chorma92 1 year ago
How long CP3 can fly?
Chorma92 1 year ago
@Chorma92, I think no more than 100 meters, its receiver and mostly rtf heli receiver are only park flyer type, not a full range receiver like in the r/c airplane
ipin17aero 1 year ago
what did you change exactly???? just some Mixer board changes?
alex26i 1 year ago
@alex26i
There are no changes, still factory default, but honestly, its gyro is not good, if you want to better single blade trainer, choose Walkera Uflys, yes it is 4ch fixed pitch, different than CP3
ipin17aero 1 year ago
its a quick helicopter im thinking of getting one but i need to save up im only 13 does anyone know where i can get one for around 5 pound
ALHJ1997 1 year ago
its a quick helicopter im thinking of getting one but i need to save up im only 13 does andone know where i can get one for around 5 pound
ALHJ1997 1 year ago
I wish they would make a belt driven tail on this size helicopter, I dont like mixers and those tail motors burning out.
7byseven 1 year ago
I need a help for setting my honey bee cp3....
activemanon 1 year ago
hi could you help me because when i want to start my dauphin up the blades dont move and the gears just i dont know what u call it in a heli strip? i have to pull the blades up and start the heli than the heli must always go up or the blades stop im a begginer and the fukin simulator from the fukin esky dosent work fuk it
punisher70000000 1 year ago
@punisher70000000
I think the problem is came for your heli gears, please change the stripped main gears with the new one. Motor pinion may not touch the gear properly because there are some stripped teet on that gear. after change the gears, Please make sure the motor pinion touch it but not too tight, or your motor will burned easily
ipin17aero 1 year ago
@ipin17aero yh i changed the gear a all the teeth on it were half the lenght but the whole shafts still go down umm how should i explain this the blades go like 1 cm down with the shaft's and so do the gears and than they strip i have to hold the heli upsides down and then put some throtle on and i can fly thx for the advice man really helped
punisher70000000 1 year ago
@punisher70000000
If your shaft down, please check the shaft locker, you can loosen its screw, pull the shaft up, and tighten the screw again
ipin17aero 1 year ago
@ipin17aero is there a tutorial or a how to vid?
punisher70000000 1 year ago
Is that a bee sound in the background?
crackerms0100 1 year ago
Nice hovering
joossshhhhyyyyy 2 years ago
You know, now I have Belt CP V2, so collective pitch. I want to have something to practise on, indoor /outdoor. CP3 head seems to me much easier than Belt´s.Motor is more powerful than FP2, but tail seems to be small, FP is larger. If you compare FP2 and CP3, which you would recommend to practise on?
cednicek 2 years ago
To practice hovering only, i recommend to try honey bee v2, because the handling is nearly same with cp3, and if you crash it, it take more cheaper repairing cost than collective pitch heli. After you are mastering the hover with hbv2, then try your belt cp v2, you will found the hovering process is more easier than before. Trust me :)
ipin17aero 2 years ago
Very nice advice. You know everybode tell me to buy FP2, but CP3 is the same price, so that is why I am trying to find out what is better for me. I just want to lear to hover and circles flying, so 3D is year in front of me :) Have you any experience with flying any kind of Belt CP? I think flying with my Belt is easier than HBFP, but HB is cheaper to crash.
cednicek 2 years ago
i have belt cp v2 too, but i thing its handling is more harder than hbv2 due to higher headspead and you can hover it indoor because is too dangerouse
ipin17aero 2 years ago
I have ordered my HBFPV2 already,so I am looking forward to learn on it.Of course simulator is need and I have ordered 6ch simulator.Exactly indoor flight is impossible for beginner,so that is why I ordred HBFPV2.Larger heli is better or stable it will be.But yes,T-Rex 500 is more stable than Belt, but price is 3x the Belt.I am just beginner trying to get into this hobby,but not as experienced to build my own T-Rex clone.Good luck with this hobby,post more videos of CP3 or other helis you have.
cednicek 2 years ago
Hi,
You can found three videos more on my youtube account. Please click on 'More from : ipin17aero' at the left side. There are Walkera Ufly, Walkera 4G6 and Trex-250 video. Next week i will post my honey bee v2 video
ipin17aero 2 years ago
Have you any experience with Esky HB V2? I would like to buy this CP3 or FP2, but I would like to hear something from anyone who own CP3. Is the head design easy to repair?
cednicek 2 years ago
Hi,
I also flown Honey Bee V2 several times. This heli's head is fixed pitch rather than CP3's Collective pitch. For beginners, Fixed pitch is much more easier while repairing because we dont need to setting the main blade pitch like CP3. Then if your skill increased, please go to next level to collective pitch heli like CP3. For flying characteristic, both helis near the same, but i thing HBV2 is much easier to hover and more saver to play indoor because it has lower main motor rpm.
ipin17aero 2 years ago