thought i should point out these hoodys are marketed as slash proof only and not stab or fire proof, oh i've seen one of these withstand a scalpel slash!
the guy holding the hoddies arm must be a complete retard, if he were to lose his grip on the cuffs, the hoddy arm would slip off and slash his arm right in half... where do retards like this get access to samurai swords and kevlar.. seriously
I think the blade on the sword was probably blunted. This was not a very controlled test, i would of thought it would give a bit more resistance, but it is aramid kevlar I suppose, which is not the best cut resistant material. Stab resistance and cut resistance are 2 very different things. You can get puncture resistance encorporated into cut resistant clothing though for true stab resistance you want a stab vest as well.
its "slash resistant" not "stab resistant". The two styles of attacks are different. One exerts pressure on a specific point to puncture, the other causes lacerations.
And basically that guy had his arm out holding the jacket, what an idiot
.. thats why they use carbon-kevlar .. carbon nano-tubes are stronger than khevlar in every apsect! Zylon is also stronger than kevlar. Dyneema is also stronger than kevlar. kevlar will stop a bullet but not a knife !!!
well i dont know about silk being stronger, i got atrands of kevlar from fiberoptic wire...and i took small strand and it held more than 30lbs, and cannot rip it with bare hands or it will cut you, i neveer tested silk but im telling you a reference to compare, not trying to prove you wrong
explain to me why i am retarded?? kevlar shatters bullets -but it can tear easily and isnt stab resistant.....Kevlar has a high "tensile" strength- and it is 5 times stronger than steel(only on a weight2weight ratio and if we used weight to weight ratios for strength spider webs would be the strongest thing on earth )-but stell is much more stab and tear resistant obviously.....as well as carbon fiber...to make kevlar tear and stab resistant it need to be mixed with carbon.
If you have watched any other videos about these kevlar garment you see that the knifes cut trough the black cloth, but bot the yellow Kevlar layer. You guys didn't even manage to cut the cloth!
This hoodie does not look so resistant
idakoosstorevideos 3 weeks ago
is that a REAL samurai sword?? looked like fake one.
anyway, interesting.
nakk37 4 months ago
thought i should point out these hoodys are marketed as slash proof only and not stab or fire proof, oh i've seen one of these withstand a scalpel slash!
pablo03118 7 months ago
the guy holding the hoddies arm must be a complete retard, if he were to lose his grip on the cuffs, the hoddy arm would slip off and slash his arm right in half... where do retards like this get access to samurai swords and kevlar.. seriously
OnlineBackupServices 7 months ago
I think the blade on the sword was probably blunted. This was not a very controlled test, i would of thought it would give a bit more resistance, but it is aramid kevlar I suppose, which is not the best cut resistant material. Stab resistance and cut resistance are 2 very different things. You can get puncture resistance encorporated into cut resistant clothing though for true stab resistance you want a stab vest as well.
stabvests 8 months ago
what is that fire spray....fire in a can? lmao
dafingerskater 9 months ago
Fail test fails. I hope the idiot with his arm behind the sleave was wearing one too.
ArgentSanguine 11 months ago
Damn I want that flamethrower Thingy
spanzieTV 1 year ago
Wonder how much they paid the red shirted guy to hold his arm there.
HiroProtagnist 1 year ago
Oh,
Japaneseソードがああああああ!!
sagamiharanomago 1 year ago
This has been flagged as spam show
Google "chronic brand" for funny t-shirts and urban streetwear.
chronicbrandsite 1 year ago
you put it on a sex doll?
GhettoBlaster100 1 year ago
its "slash resistant" not "stab resistant". The two styles of attacks are different. One exerts pressure on a specific point to puncture, the other causes lacerations.
And basically that guy had his arm out holding the jacket, what an idiot
getrevenge2 1 year ago
Swinging a blade while the other guy is holding his arm right next to it is asking for trouble.
JoanFouc 1 year ago 3
mortein ahah setting it alight with a aerosol can, fukken australian eheh
KMcombine 2 years ago
.. thats why they use carbon-kevlar .. carbon nano-tubes are stronger than khevlar in every apsect! Zylon is also stronger than kevlar. Dyneema is also stronger than kevlar. kevlar will stop a bullet but not a knife !!!
sbc2k1 2 years ago
well i dont know about silk being stronger, i got atrands of kevlar from fiberoptic wire...and i took small strand and it held more than 30lbs, and cannot rip it with bare hands or it will cut you, i neveer tested silk but im telling you a reference to compare, not trying to prove you wrong
darkeyce02 2 years ago
it can stop a knife
Epppu1321 2 years ago
explain to me why i am retarded?? kevlar shatters bullets -but it can tear easily and isnt stab resistant.....Kevlar has a high "tensile" strength- and it is 5 times stronger than steel(only on a weight2weight ratio and if we used weight to weight ratios for strength spider webs would be the strongest thing on earth )-but stell is much more stab and tear resistant obviously.....as well as carbon fiber...to make kevlar tear and stab resistant it need to be mixed with carbon.
sbc2k1 2 years ago
with this katana you can't do anything! it's a shit blade just chinese product!
kitchen knife is better!
iostenofa 2 years ago
some one in london was stabbed in the neck but they had a kevlar hoodie on and it saved their life
xxxDEATHCORExxx 2 years ago
kevlar doesnt stop stabs...it shatters bullets
sbc2k1 2 years ago
do your research before you write crap
xxxDEATHCORExxx 2 years ago
i'm really impressed with the canned flame thrower. no lighter needed!
duyt101 2 years ago
they fire it up outside of the camera the first time. after that the doll/hoodie is already burning a little so it catches fire from there.
greencap1 2 years ago
what a pair of cunts holding that hoodie and doll,wet bastards
brasser08 2 years ago
where can I get that canned flame thrower?
RiflemanBob 2 years ago
more imprtant - where can i get that blow up doll
TribalWarsTube 2 years ago 3
any spray can
sbc2k1 2 years ago
Comment removed
fastsp9 3 years ago
no, actually it isnt, but the way he tried to cut it sucked and kevlar might be like the strongest stuff known to man
freekydeekyganja 2 years ago
thats completely retarded kevlar isnt strong against tears rips or stabs...only bullets
sbc2k1 2 years ago
silk is stronger than kevlar
sbc2k1 2 years ago
you are retarded
thinkimfunny 2 years ago
why do you have a University of Toronto Hoody?
Westonci 3 years ago
hey how much was that hoodie?
mreisma 3 years ago
they killed their only girlfriend
USMarineCorpsRTSIII 3 years ago 23
cut a stack of paper first then try cutting the hoodie again ill believe it
Bl00dShinobi 3 years ago 2
The blade is dull.
If you have watched any other videos about these kevlar garment you see that the knifes cut trough the black cloth, but bot the yellow Kevlar layer. You guys didn't even manage to cut the cloth!
Just2Evil 3 years ago
No respect for the blade...that guy is looking to lose an arm...which would really be worth watching then.
WhisperingBuddha 4 years ago 21
@WhisperingBuddha the blade will bite them back eventually lol.
jeffg666 1 year ago
@WhisperingBuddha
lol that would have been great... kept thinkin that the whole time
rep420raleigh 1 year ago
Actually it has kevlar in the hoodie lining. Its made by a company called bladerunner. There are some news reports on it if you want to check it out.
Chamber44 4 years ago
lol thats not even kevlar..
Brazilianjj 4 years ago
Yep, and who is the guy looking to lose a limb by stupidly holding his arm under the hoodie, just where the blade is being aimed? Lols.
deadlypalms 4 years ago
nice idea but your katana looked like shit 20$ blade
artlovee 4 years ago 6