Added: 4 years ago
From: STARGATESG1NUT
Views: 27,107
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (32)

Sign In or Sign Up now to post a comment!
  • Hey people I know this ain't related to Vics but. Say you have a vehicle. And it has 4 red bulbs stacked for one whole tailight. But the two bottom ones are the turn signal/brake lamp while the two top ones are the park lights. How do u change this. Mabey I wanted all 4 to blink with the turn signal/hazard lights and all 4 to light up with the brake. Thanks for replies!

  • @PixelizedProduction splice all the wires into turn signals i think

  • To me it looks like ur flashers thing where on.

  • looks good

  • i wish i had the last 7 seconds of my life back

  • Nice I like how you have dual blinkers on each side of the headlight. You installed the sidelight blinker i suppose ? ?

    My 01 LX only blinks the inside turn signal. how did you install it ?

  • sorry to ask again but how did you do that?

  • I purchased 06+ Mercury Grand Marquis turn signal housings, and installed them onto my CV. There is an existing harness there to get power from.

  • do you think it would work on a  00 crown vic?

  • hello my crown vic friend. i was just talking to my dad about something like this, getting both orange lights to flash when turning, cos i find it pointless ford making a side orange bulb that doesnt flash, that way ppl from the side cant see if ur turning left nor right. havin both 2 flash is a very good idea and enhances safety. how is it that i can get both lights to flash? and does it involve installing extra parts?

  • yo this T and the easiest way is to hook your signal wire to the outer orange light by cutting the wires bothe the inner and outer and join them both in series or paralleland have ave it work like that. but i mostly work on GM, Chrysler and VW so im not sure if any trouble codes would come up on the drivers dashboard but

  • this T? wth?

  • You have a point; I can think of times when I would have let a car enter my lane if I knew it was headed right, but couldn't see the signal. My father had an old Malibu with 2 lights at each corner that flashed out of phase, so you could always see one. But I think the cornering lights (in the "Turn Signal 1" video) are more important; nothing worse than taking a left onto a dark road without them.

  • i always wondered what they were for lol

  • my bet is all you need is some knowledge about wiring and that you need a bulb and a connector in short words my bet is its easy wiring.

  • what year vic iz dat??

  • This Crown Victoria is a 2003 model, although it was built in 2002.

  • hi there. hey, how can i get both my lights to blink like that when the turn signal is activated? Normally, the inside yellow light is the only one that blink, but you have both of them blinking. PLEASE SHOW ME.... so i can have mines like that... Thanks.

  • You just need to wire the bulb in the sidemarker into the turn signal circuit.

  • oh ok. but, what do i do with the bulb's original wire? and will cops pull me over for having both the inside and outside lights blink?

  • @ShadowStriker777 < You fucking nigger, it's mine not mines.

  • @gnockergnutz Dang fool... what hell's wrong with you? Why you all up in my business. it ain't "mine" fool, it's "mines" because the "s" shows possesion you dumb twit. Besides, it's "FUCKEN" not "FUCKING" you moron piece of crap who's related to Nimrod!!! You're stupid you know that?

  • are they legal? lol

  • Yes, they are 100% legal.

  • why wouldnt they be?

  • OMFG! BRIGHT! holly shit I need them on my 99 vic.

  • hahahahahahaha.... nicholas...

  • And who are you again?

  • nolan

  • THAT LOOKS WICKED

  • i got a 96 vic thats a good idea very nice is that the police packeg min is butt my dad has 2002 vic and he beat me i dont know i just love crowns... butt nice car late !!!!!!!!!!!!!!

  • wow are you bored to take a video of the turn signal??

  • This is not a stock Crown Vic turn signal. I added a 2006-07 Mercury Grand Marquis side lens with cornering light.

  • ohh sorry... my bad

  • It's no problem. I enjoy "edumacating" people on the Panther Platform.

  • How do you get the panel off on the side lens? I took the one screw off at the back and it is still held in place tight. Any help would be apreciated thanks.

  • There is a bolt on the inside of the engine compartment, between the header panel and the radiator support. It is fairly difficult to get at, but with a ratchet and an extension you should have no trouble.

  • Im going to be putting the same lenses in my 98 vic. What did you do to make your tails lighter?

  • My taillights? If so, I put two extra lightbulbs in the area where the turn signals are on civilan Crown Victorias.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more