1.36 60'

[desmosis]

did u run a solid roller or a hyd rooler cam...????

[papers232313]

The mustang behind u is like "FUCK I have to run after that!!" lol

[xaploq1]

I wanna dislike this because its so bad ass i wanna hate but i really can't that's impossible

[crawlin82]

very nice camaro, man!

[kertong]

ahhh, this makes me miss my old '95 z28. Nowhere near as mean as this one, just a modest little lt4 hotcam / 1.6RR kit with headers and such. This video makes me wish I had kept it and turned it into a beast like yours! Badass sound, and badass launch, thumbs up!

[wjrneo2]

Your car sounds amazing. It is MUSIC to my ears. The launch is mesmerising as well.

[madskillz8990]

hood???

[jrdrag3505]

Beautiful car man, that launch is a thing of beauty. I got a '97 30th and I'm hoping to get 10's somewhere soon down the road. Who did you go to for the rotating assembly?

[chopstix396]

@jrdrag3505 both this car and my 94 formula use an Eagle crank, and eagle H-beam rods...the camaro used off the shelf SRP pistons, and I used a set of custom built Ross pistons

[94sixspeedz28]

Thats sick man i just got my first car its a M6 white Z/28 just like that i'm looking to do some work to it and i don't know where to start man can you help me out?

[chopstix396]

@94sixspeedz28 send me a PM...and I will be happy to help

[xaviervahidy]

a low 10 sec LT1 is a built right setup.

[chopstix396]

@xaviervahidy thx...this car has since ran in the high 9's ...9.91 @ 136 I think is the best so far

[xaviervahidy]

@chopstix396 np, people dont understand that a LT1 is a hard car to bring into the 10's, gratz on the 9's!

[chopstix396]

@xaviervahidy thank for the props...but it isnt that hard to run 10's with these cars. The white camaro here is not mine...check out my other videos, the white/black 94 formula is mine. It was running 10.50's @ 130+ back when it was a daily driver ;). It is now quite a bit faster than that. Feel free to let me know if you have any modification questions and Ican help lead you in the right direction.

[69651pooh]

@chopstix396 what kind of suspension gets these f-bodys off the ground, i got a 95 camaro

[PorkChop513]

This automatic rocks

[camilo19201920]

dude civic can hold 100 shot it truly not much i bet it would take alot more to damage that lt1. i jst saw the vid where this maro scrathes the shit out of hes bumper doing a wheelie sick ass maro. long live lt1

[NateFosterSR]

Beautiful

[ryansvideo]

this movie convinced me to spray my camaro

[ezcondition]

someone who knows how to use nitrous. if you can't get into the 5's in the 8th with a 150 shot, you better revamp your combo. it might run better with a single pattern.

[chopstix396]

??????????

please explain what you mean....there is alot more to run 5's in the 1/8th than a 150shot ;)

[ezcondition]

to many people rely on just putting large amounts of nitrous on a car to make it run quick. yea i know it takes a good power plant or combo, and that is what i mean. look how your car runs with just a 100 shot. i try to tell people don't rely on nitrous, build a strong running project and then add no more then 150. way less wear and tear, cause with todays heads that are on the market it is easy to build good power with the right combo, then put a little pepper on it. runs good man

[chopstix396]

I get where you are coming from, yes it takes a good combo.

This car isn't mine, the black formula is mine.

This car is a very mild LT1 build. Mine is a littlemore hard core

[koglowa]

@chopstix396 mild my ass...anything that could lift even a little is NOT mild. mild is cams and heads, not a rollcage lol

[chopstix396]

@koglowa this car is far from a pure hard core drag car...in terms of what this car is capable of it is a "mild" build. It does not use an aftermarket PCM, Solid Roller cam, etc. It uses a basic set of "street" heads, a hydraulic roller cam, and a small shot of nitrous..

[BeaZt28]

@koglowa mine is heads/cam, no cage, heavier than stock and lifts the tires

[BestMusicTaste]

@ezcondition

lol 100 shot is nothing

[gius29]

you are running hydraulic roller or solid roller cam?people said solidl roller is not for street use, but solid roller sound is cool. I bought from iskenderian a custom solid roller 248°/256° @0.50". .640"/.640, 110 lsa, to match AFR 210cc LT4 heads Please what is your advice for long life of the engine/roller lifters/cam etc i use the car in the street almost all time.

[chopstix396]

this car is a hydraulic roller...your solidroller is fine for street use, but will require frequent valve adjustments for long life

[goatjira]

Agreed. Solid rollers are fine for daily drivers. However, keep tools with you for valve adjustments, and get rubber valve cover gaskets and use an adhesive to keep the gasket in place. I also kept a set of extra pushrods, just in case.

[gius29]

thanks for the recommendation

[goatjira]

Funny how you never see awd imports trying to take on muscle that launches this good

[rwdisgreaterthanfwd]

Never eh???

[goatjira]

If you have seen any Please let me know where to look. All the vids I have seen have awd imports racing rwd domestics that always seem to do a lot of spinning. (tires?  suspension? driver nervous?) I can only think of one exception.

[rwdisgreaterthanfwd]

lol, search john shepperd.

[chopstix396]

search John Force...;)

[rwdisgreaterthanfwd]

Cause a tube chasiss funny car is the same as a door slammer production car running 7's. Fuck off....

[chopstix396]

you missed my point.....you can't compare shephard's DSM with Matts car just like you can't compare Shepard and Force ;)

[DarkLinkAD]

Ive known of FWD Grand Prix 3.8s forced induction, to do a 1.42 60ft but it doesnt look nearly as cool lol

[72Horton]

DarkLinkAD, Your 3.8 Grand Prix does a 1.42 60 ft???

Thats very fast for a front wheel drive. I would love to see a video of that.

[DarkLinkAD]

@72Horton Mine doesnt lol But Ive seen some do a 1.48 with slicks and a 11.7 1/4 with supporting mods for a 2.55 pulley.

[72Horton]

Ya I realized that after I hit sent. LOL. Thats still crazy fast for a front wheel drive. My stang has gone 11.19 with a 1.64 60 foot. Im hoping to be in the 10s with a good tune. If I hit the 10s I'll put up another video.

[slayerdearly]

nice car man :)

[Mechambird]

Nice. Rear end and gear setup??

[sikantwixxsted]

gotta be something real big. he was almost topped out by the end there.

[DODGEBOY222]

is this at memphis motorsports park

[chopstix396]

no...Texas Motorplex

[oceanspirit]

beutyful ride you got there, what is done with the chassie on that ride?

[WranglerLad]

beautiful.

[pattybart1023]

did the wolfe anti roll bar help out the most for your traction and 60ft times?

[chopstix396]

it is a factor of everything working together.

[pattybart1023]

what is the part number and spring rate on your qa1's?

[chopstix396]

stock rear springs...QA1 275# fronts

[fast79camaro2]

what does it run on motor

[chopstix396]

10.90's @ low 120's

[phoenixsonoma]

slow.....

[chopstix396]

for all the people watching this vid...Phoenix is a friend of the owner...he is being sarcastic. ;)

[phoenixsonoma]

dude...dont you know? f-bodies locally that run "only 10s" are slow. all the good ones are in the "dawn of 9 second cars" club. ;)

<3 u chopstix

[AlmostInfamous1]

is this a street and strip car? anyways its badass! nice job

[chopstix396]

Yes it sees quite a bit of street duty.

[blackz06]

Badass launches!!

[gius29]

i hope for next month i start my 383LT1 94 Z28 camaro, i have 468 XFI comp cam,super comp hooker header and 2400rpm BM converter´, edelbrock performer cylinder head,LT4 intake manifold, 30 lb/hr injector & tune by PCMforless, but i want lift the nose of the car in the start like your car, please what i have to upgrade to my car for perform this?

Thanks

[chopstix396]

Sounds like you have a pretty nice car going. You might need more convertor as the 2400 is little small for the cam you are going with. That cam is going to like around a 3500 stall.

To launch like the car in the vid will take more chassis/suspension tuning than horsepower.

[383with400shot]

i got a 950 hp 383 lt1 on the flywheel with spray how much horse is in that car im putting a 9 inch in it and i want to launch like that what type of suspesion is in that car thanks matt

[chopstix396]

this car only made approx 500whp to run the times in this video.

Suspension:

QA1 shocks, BMR TQ arm that has a custom built front mounting bracket, BMR LCA's and a wolfe anti roll bar. Moser 12 bolt w/3.73, 28x10-15 Hoosier slick, TH350 w/4000stall and trans brake

[383with400shot]

what did u do for the flex plate i want to put a th350 in and im asking around and the only thing u do is flexplate, convertor and the the th350 will bolt right up and a tranny cross member and what did u do for the drive shaft did u have to shorten it or anything thanks matt

[383with400shot]

the th350 bolted right up to the lt1 without no mods and is a th400 the same and what did you do for the shifter thanks

[383with400shot]

what did you do for the drop down cable i got a t56 and putting in a th400 with shift kit,reverse, brake and what do i need to do to put a drop down cable in and do i need to put on in if i got a shift kit in it thanks matt

[gius29]

please let me know injector size? cam specs?

[chopstix396]

the cam is a 24x/25x .61x/.59x 110 LSA custom grind

Injectors are 36#

[clayclark]

NICE MATT!!! your car is a beaasst!