1984 Big Block 454 Camaro Z28 Burnout

[TheTigaler]

i got a 427 in mine and it has alot of power

[Z28Tom402bigblock]

And do you have any suggestions on how to run dual exhaust on an 84 z28. Has ground fx from 86 if that matters???

[Z28Tom402bigblock]

That's like what mine does with an extra wheel spinning. Lol what kinda tranny and rear end do you have?

[dustinlmiller13]

hey! I know it has been awhile since you posted this video, but how hard was it to switch the front/rear/side skirts over to a 91-92?

[reapermca]

alot of people think a bbc has different mounts then a sbc. but actually they are the same mounts and the big block will fit right in place of a small block with no modifacation

[BlaiseRogers]

Nice!!!! 

[92RS496STROKER]

I'm doing 496stroker in my 92Rs.. 350 is nice cause you can swap your brackets and accessories from the 305 to the 350.. A fact I learned after I committed to my BB. But it's fun to do a build either way... What kind of HP and Torque are you laying down??

[vaultmiamoto000]

ha i got a 82 with a 305 in it im restoreing great car needs a lot of work on the interior i just got enough money for a 350 to put in it i think a 454 would be 2 times the work price and honestly id be scared to even take it out on the road ha. love the burn out hopefully ill be able to put my car up in the summer after the engine swap :D

[Dartht33bagger]

Nice. Wish it had the 84 ground fx though

[SgtSellz102]

holy shyz i want your engine for my rs

[RandyRhoadsFan82]

wanna race my blazer? lol just kiddin man i wouldnt fuck with this camaro, nice!!!

[MetallicFrankie]

those people in those houses must LOVE you guys haha

[LOLaname17]

how many rpms are you running it at

[tbraysmanee1]

iam indeed am not kiddinq

[tbraysmanee1]

all you need is some 24" inch irocs

[usnavyseals99]

@tbraysmanee1 i hope your kidding

[tbraysmanee1]

@usnavyseals99 nope

[mikecameli]

its fun to change the plugs huh where did u get headers at

[jgargettij]

did you buy that engine just to drop in the car or did you rebuild it? if you did rebuild it, how much did you get the block for and where? thanks

[justabec7]

where can i get a 454 that fits in this car?

[MrRittermn]

im doing the same build in a f body camaro i was wondering how much you got tied up into this thing i already got the car and motor and trans

[usnavyseals99]

is it like 500hp??

[MrRobGT]

O'jeeze! lol Is this vid from Minnisoooota?

[lvsincityg]

I HATE ALL THESE LITTLE GIRLS! HELP ME MAKE MINE FAST! WHAT DO I DO?! HOW DO I DO THIS? WHAT DID YOU DO?! GIVE ME ALL THE ANSWERS!!!! DO IT FOR ME!!!! FFAAGGSS!!!!!!

[i8fiveZigZagz]

Ls5 or Gen IV? Im tryn to figure out what would be the best route building a newer 454 to be like the old one or just buying an older 70s 454. Nice vid btw.

[jrg327]

Thats sick nice car

[snibblebacker1]

that seemed kinda easy!

[MusiqueMMUS]

FOOOOOOOOOOOOOOOOOOO!

[Beast20Boy]

u have set and inspiration to my 89 camaro...nice car man my dads got a 66 chevelle with a 454 so im used to seein the HP but i havnt got to do work on the camaro yet...

[kd5icr1967]

What kind of mods did you have to do to stuff a BB in it?

[mattocros]

i have a z28 just like this. except it will have a powerglide tranny and a 383 stroker motor. what kind of hp is that thing makin?

[Cleelopez]

I'm putting a 454 in my third gen camaro.. I've read online that with an LS6 low profile intake manifold and a smaller air filter,that the stock hood will close.. Any truth to this? If so.. Will under hood temps become an issue?

[Cleelopez]

Nice! Great thing to see!

[z28427]

Awesome car!!!

[IssaBendeck1]

GRATE BEAUTYFUL MUSIC TO MY EARS

[217zenki]

Hope that car has atleast some subframe connectors. I c its got something of a cage in it hope its not a bolt in..

[armsteada]

Welded 6-pt cage, weld-in frame connectors, Currie 9" rear and Spohn torque arm.

[potanda]

how did u get it to fitt??

[armsteada]

Very easy.

[TheCHEVYNATOR]

@armsteada Ive done lots of work on 3rd gen Camaros.I know its not easy making a big exhaust fit.The under carriage is very restrictive.What did you use after the headers and back?

[GingerCrashDummy]

@armsteada slips right in. like a glove

[2TrooperTV]

thats wha i was think... prob did some work on the fire wall

[armsteada]

No firewall work.

[2TrooperTV]

no way really?

[TunedPortZ28]

@armsteada Still have the car? Any of it going down the 1320? Big Block Third Gens are the shit.

[uploaded113redone]

@potanda you have no idea how much room is in that engine bay

i have an 84 and i plan on putting a 454 in it too

[potanda]

@uploaded113redone I do idk why i said that 1 year ago

[uploaded113redone]

@potanda noob question indeed those cars are made for engine swaps i tell you hwat

[potanda]

@uploaded113redone Tell me what? what were you going to tell me?

[uploaded113redone]

@potanda its a texas thing

[mr100atr]

@potanda 454 lines right up with the turbo 350 tranny.....



[sincerelytatty]

sounds great...but from wat ive heard from the builders is that big blocks r 2 big 4 3rd and 4th gens...its 2 much torque in big blocks 4 those f bodys...when ur at the track do u always have trouble sticking???

[AQUABANA]

NICE

[fishermankory]

i think that was the best burnout i have ever seen

[bigred8944]

your run very well i have a 89 camaro with a 454 as well. tell me where did you find your headers and how work was done to your chassis

[armsteada]

I found my headers on ebay. They are Hooker swap headers for big block engines in '82-'92 camaro/firebird.

[csdougcs]

how is was it to swap the 454 in cuz i just got me a 1984 camaro the other day it dosent have motor or trann will a stock one work for the 454? or should i get a

t400 ? and about the motor what did u have to do 2 swap it in if u dont mind me asking???

thx u

bye the way bro u have a super nice car =]

[brent3360]

kool im geting a 1987 trans am with a 454

[slugginthemhard2k]

Ur camaro is amazing dude!!! Keep on keepin' on!!!

[jaymoney952]

that was pretty cool.....I got an 83 Z28 with no tranny and a stripped down stock 454..... I am looking into getting a manual tranny but having a hard time finding a good one for around 2 grand do you have any suggestions? thnx

[racingjwalter]

NICE!!!

[ls6guy]

wow that was great

[INCRIPTEDDIABLO205]

PULLED GREAT IN SECOND