I saw so many reviews of this diffuser and not one has a before and after pic comparision which is more important than showing us how to fix it onto a hot shoe.
What were your camera settings? Obviously, a diffuser is going to reduce light output. The best way to use a diffuser, especially indoors, is to set the flash to TTL, open the aperture as wide as possible (depending on the depth-of-filed that you need), and drag the shutter. Out doors, when you just need fill-flash, you can shoot in Program mode, for situations. Also, remember that if you are using the pop-up as your main light, distance to subject is limited.
On many Nikons this may be due to the way the default TTL-BL flash mode works - it does not compensate for the diffusor, even if enough flash power is available (try manual full power flash!). A workaround is to use the standard TTL mode which is the default with spot metering. Another workaround is the FV lock function on some cameras.
You can make one for yourself by using a frosted 35mm film can (get several for free at your local processor ie:Walmart) Take the top off - cut the can to fit your flash and put the cap back on. Free and works great!
Of course, you understand that you the $3 version is a knock-off. Support the knock-offs and you destroy the incentive for inventors to develop and bring to market new products.
can YOU justify spending over $50 to $100 on a single piece of tupperware? I sure as hell can't. I made a couple out of discarded 4-litre milk jugs and got the exact same effect.
It depends of the value of your photos. I make a living as a photographer. $50 for a piece of plastic seems crazy, BUT if that $50 investment makes you $100s or $1,000s in increased sales, then not having it is CRAZY.
Anyway, ou probably didn't understand that the video is about the Puffer ($20). I can't imagine using a 4-liter jug on a pop-up flash. :-)
I just read this old post-nice comeback! ha ha If I was to take a picture in solid shade (like under a tree) and use fill flash with this puffer would I get good results?
@numarkmixer1 Out doors, when you just need fill-flash, you can shoot in Program mode, for most situations. Also, remember that if you are using the pop-up as your main light, distance to subject is limited.
@Orcinus24x5 LOL, I cant imagine shooting a model or a senior or anyone else for that matter with a milk jug sitting you your camera. That just oozes class. hell i would take toilet paper over a milk jug.
Make something similar that folds flat, with a bit larger screen a bit further away, and I will buy it :) Otherwise I'll have to make it myself for $0
got these on ebay for $5, included amber, tungsten, and white gels as well.
jh3835 1 month ago
You can get an identical one of these on ebay for 2 dollars, shipping included :P Mine just arrived today
Varonessor 6 months ago
@Varonessor where can i buy one ? search for it at which name? link?
yannickske69 1 month ago
@yannickske69 I got mine on ebay.com. Just search "Pop up flash diffuser" in the ebay search bar, and you'll see them.
Varonessor 1 month ago
Thanks :)
melthazor 7 months ago
Thanks for the review! :D
batty9 10 months ago
Thanks :)
laughingcrows 10 months ago
Will it fit the D700?
001FJ 11 months ago
@001FJ Yes, it will.
socalcamerapro 11 months ago
@socalcamerapro Thank you :)
001FJ 11 months ago
visit Gary's website.
socalcamerapro 1 year ago
I saw so many reviews of this diffuser and not one has a before and after pic comparision which is more important than showing us how to fix it onto a hot shoe.
camelinthedessert 1 year ago 6
ok thank for the information :) cheer!
Deric :)
tanwk123 1 year ago
does this puffer works on sony camera hot shoe?
tanwk123 1 year ago
@tanwk123 It does not.
socalcamerapro 1 year ago
@tanwk123
here is a simillar product on ebay and way cost effective, properly from the same factory that makes Gary Fong's range: 140448269922
someguy6481 1 year ago
@someguy6481
ok thx ya :D
tanwk123 1 year ago
@tanwk123 now it does I just bought one for my A200
dripper 1 year ago
@dripper oic :D
tanwk123 1 year ago
@tanwk123 just plastic you could file it and make it fit
k2kona 1 year ago
@tanwk123 There is now one for Sony.
socalcamerapro 1 year ago
Good.
MauriceFlower 1 year ago
Thank you for the demo. I'm glad to see you used Nikons to demonstrate.
mexipol1 2 years ago
3:08 Could you set your camera any closer to the edge of the table?
Nice informative vid though
jeffbrent 2 years ago
yeah, this is a great item..and it doubles as a very small paddle if you get stuck out on a lake.
In fact it may work better as a paddle then as a flash defuser!
Boy.. Gary Fong's a genious!!
CJPHOTO3 2 years ago
Great vid!
Have you done much astrophotography?
N37BU6 2 years ago
None at all -- unless you consider a few shot of the moon :-)
socalcamerapro 2 years ago
"I've been using this since 1970, not necessarily the same piece . . ."
excellent video and you're funny too!
arifali01 2 years ago 2
R.O.F.L. "And I've been using this since about 1970... well, not necessarily the same piece." Hahahahah!
chade2112 3 years ago 26
What were your camera settings? Obviously, a diffuser is going to reduce light output. The best way to use a diffuser, especially indoors, is to set the flash to TTL, open the aperture as wide as possible (depending on the depth-of-filed that you need), and drag the shutter. Out doors, when you just need fill-flash, you can shoot in Program mode, for situations. Also, remember that if you are using the pop-up as your main light, distance to subject is limited.
socalcamerapro 3 years ago
it reduced the flash strength DRAMATICALLY
mzahra1 3 years ago
On many Nikons this may be due to the way the default TTL-BL flash mode works - it does not compensate for the diffusor, even if enough flash power is available (try manual full power flash!). A workaround is to use the standard TTL mode which is the default with spot metering. Another workaround is the FV lock function on some cameras.
samo1111 2 years ago
Thank you so much for taking the time to make this.
jzcix 3 years ago
Thanks for the demo. I ordered mine today for about 20 bucks! Hope I get better pics with the built-in flash now
sabiha29 3 years ago
You can make one for yourself by using a frosted 35mm film can (get several for free at your local processor ie:Walmart) Take the top off - cut the can to fit your flash and put the cap back on. Free and works great!
Odin828 3 years ago
3$ on ebay, with shipping is 9$
miheiLi 3 years ago
Of course, you understand that you the $3 version is a knock-off. Support the knock-offs and you destroy the incentive for inventors to develop and bring to market new products.
socalcamerapro 3 years ago
Tell me where can i find the real thing?
miheiLi 3 years ago
can YOU justify spending over $50 to $100 on a single piece of tupperware? I sure as hell can't. I made a couple out of discarded 4-litre milk jugs and got the exact same effect.
Orcinus24x5 3 years ago
It depends of the value of your photos. I make a living as a photographer. $50 for a piece of plastic seems crazy, BUT if that $50 investment makes you $100s or $1,000s in increased sales, then not having it is CRAZY.
Anyway, ou probably didn't understand that the video is about the Puffer ($20). I can't imagine using a 4-liter jug on a pop-up flash. :-)
socalcamerapro 3 years ago
I just read this old post-nice comeback! ha ha If I was to take a picture in solid shade (like under a tree) and use fill flash with this puffer would I get good results?
numarkmixer1 1 year ago
@numarkmixer1 Out doors, when you just need fill-flash, you can shoot in Program mode, for most situations. Also, remember that if you are using the pop-up as your main light, distance to subject is limited.
socalcamerapro 1 year ago
@Orcinus24x5 LOL, I cant imagine shooting a model or a senior or anyone else for that matter with a milk jug sitting you your camera. That just oozes class. hell i would take toilet paper over a milk jug.
photofanaticist 1 year ago
Make something similar that folds flat, with a bit larger screen a bit further away, and I will buy it :) Otherwise I'll have to make it myself for $0
samo1111 2 years ago
Thanks. Excellent and very helpful.
nnsuch 3 years ago
great information! nicely-made video! thanks!
mycssamail 4 years ago
A nice idea. For around $20 it's probably wirth having lying around for quick snaps.
PIXscotland 4 years ago
Very interesting. I'd not heard of it before but exactly as you say, there are times that you don't have or want to get out the full works.
One thing you didn't really mention on the video was the sorts of results you've been getting and how much it costs.
Cheers,
Lee
LeeOades 4 years ago
thanks for posting. very educational.
grrlduda 4 years ago
it was cool sir, bravo
hagiwhat 4 years ago