Sounds like a good ground problem or is it possible that one LED is reversed or shorted? I have never run into a problem except if I am using LEDs were you have to use external resistors.
hey great Car!......i made the same light-bar from off your website and it looks awesome.......only 1 problem, I don't know much about electronics, but my LEd lights do not shut off and flash..they stay on(lit) and flash brighter...but do not totally shut off to flash.......any suggestions on what I did wrong? all lights are always on, they just flash by getting brighter..thanks!
I install the sticker and then make a hole in the body and sticker with a body hole reammer. I then push the LED thru just enough so that about 1/8th of an inch or less shows. I then use hot glue on th back side to keep it in place. The hot glue will not damage the paint or LED. Hope that helps...
Hey everyone.. watch out. cops now have scanners in portland that AUTOMATICLY scan you licence plates 360degrees!!!! if you have warrants, no licensee, expired tags and such the computer tells the cop!!!!!! also they have thermal imaging and much more! cops have way to much resources and our rights have officially been illiminated!
If you dont think that they will eventually expand what it does then you are kidding yourself. ever hear of freedom from government. its a good idea and how our country is the most free in the world. dont end what little we have left by allowing the police and federal government agencies to take advantage of us.
Sounds like a good ground problem or is it possible that one LED is reversed or shorted? I have never run into a problem except if I am using LEDs were you have to use external resistors.
Trekrooster 1 year ago
Yes the leds have built in resistors.
Foman18 1 year ago
hey great Car!......i made the same light-bar from off your website and it looks awesome.......only 1 problem, I don't know much about electronics, but my LEd lights do not shut off and flash..they stay on(lit) and flash brighter...but do not totally shut off to flash.......any suggestions on what I did wrong? all lights are always on, they just flash by getting brighter..thanks!
Foman18 1 year ago
First are you using LEDs with built in resistors? If not there may be a problem with how the external resistors are connected? Let me know.
Trekrooster 1 year ago
where did u get the lights for a1/10 scale rc car. cause im lookin into turning my nitro rc car into a car similiar to this
Krankshaft06 2 years ago
i think th siren is from a lego kit cuz i got the same one lol
musicmacgames34 2 years ago
thanks alot!
dantect9a 2 years ago
so you cut a small hole in the sticker and just pushed it through?
dantect9a 2 years ago
I install the sticker and then make a hole in the body and sticker with a body hole reammer. I then push the LED thru just enough so that about 1/8th of an inch or less shows. I then use hot glue on th back side to keep it in place. The hot glue will not damage the paint or LED. Hope that helps...
Trekrooster 2 years ago
how did you get the headlight to look so good even though there stickers
did you put the lights through the stickers?
btw i love it!!
dantect9a 2 years ago
Yes, the LEDs are installed thru the stickers...
Trekrooster 2 years ago
Hey everyone.. watch out. cops now have scanners in portland that AUTOMATICLY scan you licence plates 360degrees!!!! if you have warrants, no licensee, expired tags and such the computer tells the cop!!!!!! also they have thermal imaging and much more! cops have way to much resources and our rights have officially been illiminated!
LetsRapeGovernment 3 years ago
Warrants, no licensee, expired tags... Just do not have these offenses and you do no have to watch out so much.
Anothercoilgun 3 years ago
If you dont think that they will eventually expand what it does then you are kidding yourself. ever hear of freedom from government. its a good idea and how our country is the most free in the world. dont end what little we have left by allowing the police and federal government agencies to take advantage of us.
LetsRapeGovernment 3 years ago
Hey Man she looks so Sweet that Is the BEST one I have seen.But where do you get the Boddies?
Jabbajawz4life 3 years ago
That looks crazy in the dark
nice one
What cars do you use for your rc police
JSM721 3 years ago
So far I have been using a Protoform Charger and a HPI Mustang.
Trekrooster 3 years ago
how much for it i would really like to have it
polackspdx 3 years ago