Pro Cymbal: NAMM 2010 Cleaning Demonstration

[asenseofhate]

i would be too afraid to crank down on the center of my cymbal like that

[TheMcbob74]

@asenseofhate I feel ya. Probably be ok as long as there's good support on both sides of the bell with some built in cushion, like some neoprene bushings maybe. Been tempted to try something like this, but don't wanna mess up my cymbals.

[readman010]

you missed a bit...

[MauriDjDc]

3:36 WOOOOW

[jesusjnth]

I liked the part when he cleaned the cymbal.

[bondjamesbond12]

Can i get one???

[07Meverasvolver]

AMAZING!!!

[Suprematista]

well, the machine... I think I'm going to use my bike u_u ... D=

[halabinono]

the band playing is like a shitty combination of motorhead and nickelback

[Tehfirter]

what the fuck you tighten a nut down so hard on that cymbal? that would crack your cymbals centerhole immediately. PLAIN STUPID! MY CYMBALS COST 400$ PER PIECE AND I SURE WOULDNT TIGHTEN A NUT ON IT WITH DIRECT METAL TO METAL CONTACT!.

[Theneongray2]

@Tehfirter

How do you think cymbals are made?

[Tehfirter]

@Theneongray2

it doenst matter, would you tighten a fucking wing nut on your cymbal hard just to clean it and loose the logos?

[Theneongray2]

@Tehfirter

All cymbals are made using a bolt tightened extremely tight. Your theory is retarded. How would you make a cymbal? And don't try and act like I support this product and like removing logos you fucking idiot.

[TamaDrummer788]

Does anyone know where the heck to get one of these machines!? D:

[marcbenjamsojayco]

@TamaDrummer788 u can use ur electric fan remove all the components just leave the motor and the screw thingy then put something soft ander ur cymbal.....

[Fr33MAN911]

This thing will sell until one of the cymbals flies off and takes someones head off...

[jasonad2208]

The hole in his glove is distracting = (

But i'm also feeling bad for some reason . . . = (

[chickenbeforeegg]

where do they offer this service (if they do) outside of NAMM?

[fabioegoband]

@chickenbeforeegg probably, not a lot customers, but for the quantity cymbals

[xenoht]

Oh sure...I want to tighten a f'ing nut down on my $350 cymbal!



[instereovideos]

@xenoht I doubt that's very bad for it if you're not striking it with a drum stick.

[brimbles72]

IT'S SO SHINY

[19zoo53dog]

You guys should try Amedia cymbals. Just discovered the line and I'm already up to 2 sets of hi hats, a ride, 2 16" crashes and a 12" splash. I'm going back for more. Really beautiful sounds and they look great too!

[JoeMama165]

probably the only thing done to that cymbal by hand

[ferrit619]

Id love to see them clean a Paiste Rude simply because of their colour. They'll probably turn silver

[blackdragonheart16]

press 1 and 9 for the diference ;)

[somos999]

whats the name of the song anyone?

[feddog2500]

Wow yeah this looks so hard to make, a motor and some cleaning materials :P derp

[Kaledrums]

Hmm My paragons could use this

[SpiderlordBand]

Sabains ALL around.... Paragon 14" Hats and Paragon Ride, AAX X-Plosion 16" and 18" Crashes. Zildjians suck.

[julianisdope]

@SpiderlordBand don't be ignorant. ALL companies make good cymbals. ALL companies make crap cymbals.

[instereovideos]

@julianisdope ALL? No, ALL!

[Drummer2849]

@SpiderlordBand dido

[AspiringRocker729]

@SpiderlordBand Sabian isn't really any better in my opinion.

[BR177]

whoever says a clean cymbal sounds better is a guitarist

[sgtpepper1138]

@BR177 I personally like the sound of them after I clean them.

[BR177]

@sgtpepper1138 so you are a guitarist

[sgtpepper1138]

@BR177 Yeah, check my videos. I play guitar really well....

[BR177]

@sgtpepper1138 nice drumming, but I do not like your cymbals ahahaha seriously you need some zildjian k's

[sgtpepper1138]

@BR177 Well my ride is a K Custom med.

[ashjohnbop]

that is sick

[BennexD]

is it a steel wool that he uses to clean ???

[smrzramirez]

sir.....what liquid are you using?

and can you pass me where i can buy it and all plis?

[PLUGS33]

Isn't this a scene from the movie "ghost?"

[DrummerXx311xX]

should've used a dirty A custom Zildjian cymbal... then I'd be convinced :P

[Salazag]

Nice setup, but this is very Dangerous using your hand to polish, don't even try this can chop your fingers off like butter. Use a pad on some sort of stick were your hands are not directly on the cymbal this way if you slip you are safe. the edge of a cymbal at this speed can injure you. thanks you and be safe.

[JackMehoff845]

@Salazag it has a pedal to control speed

[themvsmevsu]

Sir... You have a hole in your glove.

[TempoXXL]

I think the spinning cymbal has a hypnotizing effect !

The colour changing parts (apply the white slurry) are ......... wow.

I must see this vid again and again..........help

[drummerg2]

screw the logo,zildjian doesn't sponsor me to play their cymbals, i wont forget what cymbal it is, just my 2 cents....

[nickfenton100]

@drummerg2 so true man. fuck the company its just free advertising for them..

[makmubotak]

i'd buy this if it could retrieve the logo at the end

[RRDanielli]

@makmubotak But if you mask the logo it won't came out during the polishing process... I'll make one of these for myself with sewing machine engine...

[makmubotak]

@RRDanielli noo, I mean I'd buy this if it could 're-appear' faded logos, which is meant to be a joke :(

[armymanhaha]

I wonder why i enjoyed watching someone clean his cymbal.

[boilingpoint3]

you can just tilt your car take one wheel off and then drive :P

[makmubotak]

@boilingpoint3 take off all wheels unless you want your car spinning

[Rajindahouse]

why in the world would you want to clean a cymbal unless you care about how they look. it adds to the character of it

[ilovepwd]

@Rajindahouse well they do look so much better on stage and if your using high end cymbals and have $1500 + you'll want to take care of them

[golferal]

Why would you put this retarded ass music on your demo? There's no context for it and it's so horrible that now I don't even care if your product works or not.

[Shizzno69]

what kind of cleaning solution does he use???

[dinmorerenwebbergril]

A cymbal should really be dirty before i'd consider cleaning it !

[JDRUMMER95]

amazing

[punko18288]

it all depends cuz i got a 21 inch sweet ride and when I clean it up it sounds quite brite, but when i left it dirty it have a unique sound and i love that dark sounds that produce the dirt on my cymbal

[Raaidan]

i wouldnt care about my logos and all that i love clean cymbals but with the finger marks around the edge from being chokes the only thing i dont ike about this is the way they clamp down the cymbal there is no way i'd let anyone do that my cymbals

[bubbasock]

Sorry, but I like my cymbals to sound good.

[freestylefilmsinc]

a shop buy me has one of these and they did mine for £20 it was well worth it

[TheJackass347]

i would do it but i like my logos on it

[DjABBlends]

@TheJackass347 really?

i wrather have a cymbal with no logos ,clean,and sounds great than a dirty cymbal with logos and not sound as good as clean.

-my opinion

[TheBIGMAC147]

@DjABBlends same i would rather have a clean cymbal without logos but i would still like to have them on if u know wat i mean

[DjABBlends]

@TheBIGMAC147 yes!! totaly true!

we all would still like our logos on but thers a point that it wont matter anymore!

but we can all still re-ink them.

[player836]

the more stoned i am the more i love this video

[ParraKiller]

Incredible!!! Shining like would be new!!!

[Frdbrkl]

Nice. Not so good if you want to keep the logos on that K, though.

[readman010]

whoooaaa i wonder if i cud find one of those on i want one of those . com

[TheCymbalPolisher]

This product has a been a patented by The Cymbal Polisher

He has "stolen" this idea.

This unit is $3;000.00

The Cymbal Polisher is only $599.00

Which would you buy?

[ThePretender94]

LOL NICE 2:04

[ernesto101084]

Wow. nice. That spining thing is a good idea. I use a polisher used to polish cars but what you use is better. Where could I find one and around how much would it cost?