I thought of a bit of a spring loaded rail gun. what if you had a spring with a north magnet cube on it and on two horizontal posts were magnets that faced outwered like panels and when you shot the spring the magnet would gain force by the south end of the magnet panels its passing.
donst really make guns obsolete. they take alot of power not to mention the wear on the rails is insane. the first couplw only did one shot before needing to b replaced. theyve advanced by leaps andd bounds but right now and in the near future the most we can expect is limited use on navy ships. towards 2016ish there aiming for naval use but who knows what break throughs there could be.
So, a projectile propelled by a railgun is faster than a projectile propelled by gunpowder; am I right or not? If a railgun propelled projectile can hit a target harder, faster, and farther; then that makes gunpowder obsolete, just like tension strength.
@BasariosRock No, Its the size of a naval ship. The gun itself maybe the size of a truck, but the energy needed to power it is the size of a naval ship.
alles was ich gesehen habe war ein kleiner blitz am ende der kupferschienen aber es wurde nix abgeschossen oder? also in dem karton sehe ich kein loch
these german people are so smart. I tried to build one but the bullet wont even move an inch because the arc would weld it to the rail, me so dumb. LOL
no transformation to plasma, sorry. Some railguns accelerate the projectile to velocities that result in friction that destroys the projectile, what results in a burst of plasma, but that's not the aim of building a railgun.
You need capacitors if you want to have a high enough voltage to actually shoot something. Btw, your grammer is screwed... what are you, a third grader?
@dissevered what would happen if you shoot a small projectile like the size of a baseball at the speed of light and hit an object like a supercarrier?
@pacloro Well, upon impact, the baseball would release around 6,515,962,815,154,800 newton-meters of energy. A Nuke releases approximately 70,000,000,000,000,000. So it would hit with about as much power as 1/10th of a nuke.
You are shorting a 2.2kj railgun through a switch! That's got to be one huge switch to handle that kind of current and voltage. Also, why didn't you use a few scr's in parallel that way its an electronic switch like a relay.
scr for a railgun must be able to handly mans thousands Amps and are very expensive. i`ve 3 scr with 1,5kA peak. but i think that the peakcurrent is above 4,5kA!
I have an scr that is rated for 300amps continuous at 1000v with a 9000amp surge for 8 milli seconds. I got it for $50 on ebay! I am currently using it on my coilgun.
These scr's are capable of almost 1kj a piece but 3 of them together would be able to discharge these capacitors. But then again you only need these for aluminum foil. If you use an air injector there is no need for a switch because the projectile becomes the switch.
Nice, the rails are a bit long for the amount of capacitance you used. However if that was the projectile stuck in between the rails you perhaps used too much voltage.
You can also shoot on your own cock - if you have erectile dysfunction ...
haha
djblackarrow 6 days ago
@ripu2 you can't fire objects faster than the speed of light
karatefreak97 2 months ago
@karatefreak97
Agreed. Only information can move faster, nothing with mass.
Valhure1 1 month ago
@Valhure1
(The Information Thing is crazy advanced crap they nobody understands so for all intensive purposes ignore it (=)
Valhure1 1 month ago
@pacloro you could not fire any object at the speed of light, and even getting anywhere near close on earth would be extremely difficult
0kadin0 4 months ago
@0kadin0 The same was said about the speed we have for our current bullets back in the era we shot still shot arrows.
strikerk 3 months ago
@0kadin0 You are a little behind the times, CERN is already firing "objects" (neutrinos) faster than the speed of light.
Ripu2 2 months ago
Warum kann ch die elkobank nur 130 mal aufladen?
Nanobot02 5 months ago
they are making new weapons for hitlers return
rsv1336 6 months ago
yipeee 0:13
SuperVladeG 6 months ago
looking at the glass with umbrella is not really worth it.
wtFitskira 7 months ago
Quake 3 arena has a better rail gun ;)
Djedv1n 8 months ago
Folks look at the birth of the star wars star trek phaser :)
vexviper 9 months ago
I don't get you guys, this is a real rail gun, it's just that the projectile was so hot that it melted into a shower of sparks.
FlyBySigh 9 months ago
i blinked...what happened?
thillitt1 9 months ago
What the actual fuck?
DJArekkusu 9 months ago
I thought of a bit of a spring loaded rail gun. what if you had a spring with a north magnet cube on it and on two horizontal posts were magnets that faced outwered like panels and when you shot the spring the magnet would gain force by the south end of the magnet panels its passing.
JigsawsGame1 9 months ago
GERMANS HAS RAILGUNS
WE ALL DOOMED !!
kermitttt 10 months ago 5
@kermitttt
MUHARHARHAAAARRRRR
AnselmoFanZero 8 months ago
@kermitttt Poor jews... Poor fellas...
egeseatr35 8 months ago
What am I looking at? What direction is it even being fired from?
tour86rocker 10 months ago
thumbs up if you blinked
smacker261 1 year ago 9
fghfh
BFBCCOD4 1 year ago
donst really make guns obsolete. they take alot of power not to mention the wear on the rails is insane. the first couplw only did one shot before needing to b replaced. theyve advanced by leaps andd bounds but right now and in the near future the most we can expect is limited use on navy ships. towards 2016ish there aiming for naval use but who knows what break throughs there could be.
Joesolo13 1 year ago
lil' MAC canon
UltraMif71 1 year ago 2
cant even destroy a cardboard? lol
rax7 1 year ago
So, a projectile propelled by a railgun is faster than a projectile propelled by gunpowder; am I right or not? If a railgun propelled projectile can hit a target harder, faster, and farther; then that makes gunpowder obsolete, just like tension strength.
dafranx 1 year ago
@dafranx
Easily 3 to 4 times faster than gunpowder. And that's comparing it to a high velocity rifle like a Colt AR.
bullmilk 1 year ago
0:20 is that a .22LR casing?
jolleyboy2 1 year ago
Shit the Germans acquired Rail gun technology. I'm watching you Germany..
Don't make us come back over there.
lolz.
And begin political hate mail in 3.. 2.. 1...
America2470 1 year ago
well the military has a railgun but its friggin ginormous the size of a garage or somthing similar
BasariosRock 1 year ago
@BasariosRock No, Its the size of a naval ship. The gun itself maybe the size of a truck, but the energy needed to power it is the size of a naval ship.
oceanblue1224 1 year ago
nothing happend to the box
evans822 1 year ago
Do you have pdf for this design?
wookie0 1 year ago
@HazzWold1993 adgadsg aejgl faf a!
SuperRaymon777 1 year ago
0:22 .22 cal shell
hackerdudemofo 1 year ago
alles was ich gesehen habe war ein kleiner blitz am ende der kupferschienen aber es wurde nix abgeschossen oder? also in dem karton sehe ich kein loch
Psychochilla 1 year ago
Are those copper rails? Damn, that has to be expensive to replace when your rails wear out.
KittyRokher 1 year ago
Attack of the Nazi's 2!
StorkKhan 1 year ago
hmztag und nacht träume ich davon dass sich jemnd findet der mich vor meiner langweile erlöst^^
MrBrendaonealkwesabl 1 year ago
If someone where to want a portable version, how powerful would a power pack need to be to allow at least 5 shots?
TheBreadMakerMan 2 years ago 5
with a common lead acid accumulator (12V/7,2A), about 3kg.... you could theroretically charge the capacitor bank 130times =)
Stexx0r 2 years ago 4
you germans are up to no good again i see...
fahddoggz 1 year ago
@fahddoggz
HA!
crashmidget15 1 year ago
@TheBreadMakerMan you'd need 5 capacitor banks and you'd have to load each shot one after another.
ThrowingItAway 2 years ago
verdichtete alufolie ^^
Stexx0r 2 years ago 2
@Stexx0r was geschieht wenn du anstadt alufolie nen nagel reinlegen würdest?
MachineFight 1 year ago
@Stexx0r bei mir funktioniert das irgendwie nicht ...
:(
Andreas861993 5 months ago
Those zaney Germans.
Chronobeanz 2 years ago 41
Dont ya know? Germans always have the best stuff!
DudemanClide 2 years ago 5
Amazing work guys. Keep perfecting it
Psynergi 2 years ago
Wow! Quake 4!
AdeonC 2 years ago
WW3?
maxkikken 2 years ago
wow! i want this gun!
NicolasRussian 2 years ago
hahah they're germans.
Persicanada 2 years ago
ya, ya! gut!
NikeTao 2 years ago
This comment has received too many negative votes show
in the rail guns the USA develope there is so much electrycyty thath if you tuch some of the electro parts of the gun you will blow away
terran500 2 years ago
you made that up
and its' wrong
Q3HackerPolice 2 years ago 3
these german people are so smart. I tried to build one but the bullet wont even move an inch because the arc would weld it to the rail, me so dumb. LOL
tangnatalaga 2 years ago 5
Dude try propelling the slug into the rails
Blodslav 2 years ago
This has been flagged as spam show
what is a railgun?
sybian23 2 years ago
It is a weapon that accelerates it's projectile using magnets, I think anyways.
Crispypirate 2 years ago 2
Its a device that accelerates a projectile using one or more magnetic fields.
In future wiki this stuff.
happyflea 2 years ago 2
Magnets and an electrical current, but don't confuse it with a coilgun (which uses electromagnets).
tmafkap 2 years ago 4
This comment has received too many negative votes show
zero relation to this this converts electricity to plamsa and involves lorentz laws
firedude201234 2 years ago
no transformation to plasma, sorry. Some railguns accelerate the projectile to velocities that result in friction that destroys the projectile, what results in a burst of plasma, but that's not the aim of building a railgun.
tmafkap 2 years ago
I think the weapon that accelerate it's projectile using magnets it's a gauss rifle but I don't know :S
chebrofan 2 years ago 4
a railgun uses rails and the Lorentz force a coilgun uses coils and a gauss gun uses just magnets i think
RevanantGod 2 years ago 3
This has been flagged as spam show
☻/
/▌Says: My name's Bob. I'm trying to become famous here on
/ \ YouTube, so copy and paste me (Me = guy with right arm up) onto comments on different videos. Thanks!
halo3petoso 2 years ago
wait what just happened?
UberR3D 2 years ago
haha i love the millmax freebie box
polarbear666666 2 years ago
Start by learning proper grammar.
ross817 2 years ago
wuts better 2 use 4 rail gun capasitors or cheap alternativ...baterys?
i want 2 make one but have no clue wut 2 do in this area lol
IbonkDonkeys 3 years ago
dude. grammar. seriously.
cenzo188 2 years ago
Dude. Grammar. Seriously.
biffmofo 2 years ago 5
Seriously, stop being a grammer nazi, your fucking pathetic.
Lewissnicholls 2 years ago
Who?
biffmofo 2 years ago
Two guys where ripping some kid for mispelling a word. I cant remember who it was.
Lewissnicholls 2 years ago
You're*
:P
GRAVEYARDSK8 2 years ago
This has been flagged as spam show
Fuck off,
Dickhead.
Lewissnicholls 2 years ago
This has been flagged as spam show
I was playing dickhead, chill.
GRAVEYARDSK8 2 years ago
This has been flagged as spam show
Go play by yourself then, arsehole...
Lewissnicholls 2 years ago
This has been flagged as spam show
Nah brother, i don't tend to play by myself. Not dissing your style or anything..more fun with other people though.
GRAVEYARDSK8 2 years ago
This has been flagged as spam show
Your still being a prick, and i'm not your brother...
Lewissnicholls 2 years ago
This comment has received too many negative votes show
Shut. The. Fuck. Up.
zezimaboy48 2 years ago
You need capacitors if you want to have a high enough voltage to actually shoot something. Btw, your grammer is screwed... what are you, a third grader?
Tdog283 2 years ago
Grammar.
biffmofo 2 years ago 2
Comment removed
sciencoking 2 years ago
you cant use batteries unless they were frickn huge... in witch case it would be cheaper to use caps
Phlatpop 2 years ago
how is that a good shot??? it looks liek your armature melted in the rails. there goes some perfectly good copper.
radudman 3 years ago
This comment has received too many negative votes show
i heard the railguns projectiles move almost at lightspeed
randomrage5 3 years ago
They move very very fast. But not near light speed.
cuddles555 3 years ago 3
no, far from it.. more like somewhere around mach 8 (8 times the speed of sound) which is 6,144mph. Speed of light is 670,616,700 mph
dissevered 3 years ago 26
holy fuck thats rly speedy! 670616700 mph?! wow...
Metalsonic2008 2 years ago
@dissevered
Planets move pretty fast too... D:>
furyberserk 1 year ago
@dissevered
186,000 miles per second.
MeteorMan05 10 months ago
@dissevered what would happen if you shoot a small projectile like the size of a baseball at the speed of light and hit an object like a supercarrier?
pacloro 6 months ago
@pacloro All the penises in the world would shrivel up and fall off. All of them... :/
dissevered 6 months ago
@pacloro Well, upon impact, the baseball would release around 6,515,962,815,154,800 newton-meters of energy. A Nuke releases approximately 70,000,000,000,000,000. So it would hit with about as much power as 1/10th of a nuke.
ryan31394 5 months ago
Cool but I did not see any sort of injector so I guess your shooting aluminum foil "Alufolie".
Halo2maniaccc 3 years ago
exact!
the foil is pressed between the 2 rails...
a huge homebrew switch shorts the circuit
Stexx0r 3 years ago
You are shorting a 2.2kj railgun through a switch! That's got to be one huge switch to handle that kind of current and voltage. Also, why didn't you use a few scr's in parallel that way its an electronic switch like a relay.
Halo2maniaccc 3 years ago
scr for a railgun must be able to handly mans thousands Amps and are very expensive. i`ve 3 scr with 1,5kA peak. but i think that the peakcurrent is above 4,5kA!
Stexx0r 3 years ago
I have an scr that is rated for 300amps continuous at 1000v with a 9000amp surge for 8 milli seconds. I got it for $50 on ebay! I am currently using it on my coilgun.
These scr's are capable of almost 1kj a piece but 3 of them together would be able to discharge these capacitors. But then again you only need these for aluminum foil. If you use an air injector there is no need for a switch because the projectile becomes the switch.
Halo2maniaccc 3 years ago
the peak current in a railgun is much more higher than in a coilgun because there is nearly no inductibe limiting!
Stexx0r 3 years ago
Not extremely good, but I know it's difficult to build a good railgun. I tried it myself and failed completely...
Coiltec 3 years ago
Dont they speak German there, too?
Roar2112 3 years ago
austrians speak with a bit of a different dialect. just like how theres different chinese dialects (cantanese, etc, etc)
sirdonkeypunch 3 years ago
we are from bavaria (federal state in southgermany) but the bavarians dont see themselves as germans !
Stexx0r 3 years ago
ich kann glass essen, das tut mir nicht weh! ;)
sirdonkeypunch 3 years ago
im 100% purebred American
andyskillen1992 3 years ago
and whats that got to do with anything?
i guess gj for patriotism, just dont start fucking it up when your old enough to vote.
sirdonkeypunch 3 years ago
you do know that theres no such thing as a "purebred" american, right?
MRCHEEZLE117 3 years ago
sure there is, they're called Native Americans, not to get side tracked on this rail gun vid. Just thought i'd throw that one out there.
meshuggahfan 3 years ago
but even them, didnt they come over on the ice bridge from russia?
MRCHEEZLE117 3 years ago
I'm 100% sure that's not possible.
PimpDaddy000007 3 years ago
every american and canadian is either afro, european or asian(shaking his head)
snake9510 3 years ago
Which is why I said "I'm 100% that's not possible."
PimpDaddy000007 3 years ago
Ya except Arnold Schwartznegger isn't German, he's Austrian...
tannersword1 3 years ago
I'm Arnold Schwarzenegger , ahasehashdfadfhjkgadad!
1981z28camaro 3 years ago
Please send me a message on what materials u used for the rails and such
quicksilversrf32 4 years ago
Looks like copper-rails...maybe 3-4mm thick.
Mounted on wood. Nothing special..but looks nice though.
AnselmoFanZero 4 years ago
that was a crappy setup, because the rails are not parallel... no we use this setup on the end of that page: "cableburner[dot]de/?id=58"
Stexx0r 4 years ago
Und ich wollte grad sagen: Die Page kenn ich doch...XD
minus AnselmoFan :P
Kommt da noch was?
Warum bauste das Ganze nicht zwischen dickem Plexi und augmented?
AnselmoFanZero 4 years ago
Sauba buam xD
russischbrot 4 years ago
bayan... des samma mia... jawoi!
Stexx0r 4 years ago
you kneed to shoot compressed air milliseconds b4 you discharge the caps to help move the projectiles to prevent arc welding to the rails
johndear18 4 years ago
Bullshit. You need a good contact between rails and projectile. When its properly built and the voltage is right there won't be ANY arcs!
AnselmoFanZero 3 years ago
bun ne la?
bolulusamican 4 years ago
yes the capacitance is not very high, but we put in the projectile in the front part between the rails, so that the capacitor gets excatctly empty...
we used longer rails, because we will upgrade to more than 5kJ in the next time...so we ned longer rails, and can use the old ones ;)
Stexx0r 4 years ago
Nice, the rails are a bit long for the amount of capacitance you used. However if that was the projectile stuck in between the rails you perhaps used too much voltage.
xtamared 4 years ago