umm i have two questions, if i remove the ball stopper, how do i get it back on and how can i get patterns or designs on my head after i dye it and its dry plz respond
thats real simple and easy,, one question tho, if you get a stracth or scuff, will the die come off and show white or stay that tangerine orange colour?
i think pretty much every tutorial ive found has something in it that just ruins it, wether a step in the process is unclear, or the filming is bad and you cannot tell what the person is doing.
but this is a great tutorial man! im planning on doing my first dye job once i buy my new head in about a week.
i have a pink head but want to dye it white. do they sell RIT dye that's white? if not how can I change my stick head to be white? i want it to be really white. like pure, solid white. how do i do this??
They don't have a pure white color. Even if you could find one, you can't really go from a darker color to a lighter color. You can just go from lighter to darker and even then it won't come out exact.
I've never had any problem with it warping. The head shouldn't warp because nothing is bending it. It is just sitting in the hot water. Also, when you add cool water to the pan to fill it, that would offset the heat.
Yea soap and water work best. I recommend using a nylon sponge because a regular sponge just won't cut it. Goo-Gone comes in handy for stickers and the adhesive on the back of the ball stop because soap and water won't get that out. But otherwise, clean it in any way that won't damage the head. So, don't use laquer thinner or anything that would hurt the plastic.
As for your snapped head, as long as it is plastic, you can still dye it.
Not bad, just in very few spots. The pan used for this tutorial was previously used to dye a different head blue. So, as you can see, it doesn't really stain the pan. You may notice a few spots after but you could still do another head in a different color later.
can u dye a black throat guard red
LAXBROx8 3 months ago
9:06 untill 9:19... ICE CREAM!!
DandyDavage 5 months ago
i want i rasta colored lacrosse head, can you make a tutorial for that? it would help alot, thanks
salmoh18 7 months ago
Ice cream
Nice tutorial
FLOWBUCKET999 7 months ago
this is al unnecessary... i have a better tutorial:
1) boil water
2) mix in RIT dye
3) put head in
4) take head whenever depending on time
5) done
WojnarBen 8 months ago
does the extra water have to be as hot as the other water or can it jjust be hot water you get out of the sink?
the99stingrays 8 months ago
can you keep the ball stop on?
boatbros23 8 months ago
ICE CREAM MANNNNN!
jeebly509 10 months ago
umm i have two questions, if i remove the ball stopper, how do i get it back on and how can i get patterns or designs on my head after i dye it and its dry plz respond
playlikearaven12 10 months ago
for anyone who does not live near a craft store (like me) rit dye is also found in most to all walmarts, in the detergants section. hope that helped.
drsevans11 10 months ago
dude ur fucking stupid half of that shit u dont need FUCK!!!!!
hockeymmaann 10 months ago
@hockeymmaann ya hes right you dont need half the stuff
xiMMaxSniPeRx 10 months ago
I doubt that would set the paper on fire...
gjmvi 11 months ago
I doubt that would set the paper on fire...
gjmvi 11 months ago
good tutorial thnankx
Domdulla 11 months ago
thumbs up if u heard the ice cream truck in the background!!!!!!!!!!!!!!!! (9:10)
tyguy174 1 year ago
sorry about that that was my little step brother that did that. very good explanation on how to dye the head.
lacrosseelovee7 1 year ago
do we need some extra water?
lacrosseelovee7 1 year ago
thanks so much it looks much easier than all the other vids ive watched on this subject
kdcordova 1 year ago
very nice tutorial
69xLAX 1 year ago
very detailed tutorial thanks a bunch
69xLAX 1 year ago
This was the best video on How To Dye A Lacrosse Head. Thankyou so much!
Aasu7722 1 year ago
you dont have to remove the ball stop
ethan1440 1 year ago
wow same head as me
lacrosseguy123419 1 year ago
This has been flagged as spam show
ice cream truck at 9:10
ClemTigers281 1 year ago
very nice tutorial
FlyersFan1517 1 year ago
can you die the shooting strings? ill take any help
kevmacc99 1 year ago
@kevmacc99 y would u dye shooting strings, just buy the strings in the color u want
XxNDfan811xX 1 year ago
I dyed a head navy and came out purple any reason why that hapenend?
NOLAairsoft95 1 year ago
@NOLAairsoft95 same thing happened to me...idk why
nevetstterb1 1 year ago
can you use food coloring as the dye
TheRunescapeowner101 1 year ago
can you put the ball stop back on if u take it off
astros97 1 year ago
if you take the ball stop off how do you get it to stick back on?
cowgomeow17 1 year ago
icecream drives by at 9:15 haha
good video!
elijahairsoft 1 year ago 2
Nice vid. Looked really cool. Thank u. This vid helped me a lot.
bdelaney22 1 year ago
Can you dye the strings when there still on the head or no
crittic447 1 year ago
Do you use hot glue because some people do. Do you need it?
thebestcapsfan8 1 year ago
why is it important to remove the mesh
VtFaiLuRe 1 year ago
lol ice cream truck went by
hitman500m 1 year ago
were can u buy colored mesh??
gokuneji1 1 year ago
hahaha i like all the noises...chainsaw/weedwacker....lawnmower....icecream truck
JakofallrecreatioN 2 years ago
do you rlly hav to remove the ball stop
hotdog1604 2 years ago
@hotdog1604 no but it turns the same color of the dye. so itd look better if you took it off and put a new white one after
kirfdog 1 year ago
nice head it looked really cool
Mw2KniferOnly 2 years ago
ive seen some other videos and they put viniger and salt in they're dye. do u have to do that?
versadrummer 2 years ago
enter the stick doctor competition. great prizes. check their site for details.
StickDoctor1 2 years ago
i have a black/white glued head and im trying to get it to go to all black but the white spots still look black. any suggestions?
LAXdrummer95 2 years ago
when i kept my ball stop on it fell off so do i just glue it or leave it like it is
spafffel 2 years ago
thats real simple and easy,, one question tho, if you get a stracth or scuff, will the die come off and show white or stay that tangerine orange colour?
langford19 2 years ago
you dont hav to take yhe mesh out and it wont get harder or softer and you can jus keep the shaft on it wontrust or get painted
ninjakids0 2 years ago
how do you put the ball stop back on
mine wont work
spafffel 2 years ago
your not really supose to take them off. but you can always hot glue it.
4hardPAINTBALL 2 years ago
i hav a light blue head can i still dye it another color
coloradolax 2 years ago
yeah you can go light to dark, but if you have a dark colored head its not going to work
540spina 2 years ago
thanks a lot man, i just did my head and it looks way tight. anyone that wants to dye their head make sure you use RIT dye, other stuff doesnt work
smitheric21 2 years ago
i wanted to dye my fiddle stick head. my friend tried to dye his but it didnt work. your head sank my friends floated. do you know why????????
lplaxer19 2 years ago
Comment removed
Thepaintballkid19 2 years ago
Just attach a couple gram weights to the head
hulklogan17 2 years ago
you didnt even do any desighn or anything it was very good but with no decine it wont tell the person watching everything to know about dyeing
emburyb661 2 years ago
thank yo! this helped so much bc i have been trying to dye a few of my heads orange but they keep coming out red...ice cream man!
Ghungry99 2 years ago
dream-cicle?
oMyMike 2 years ago
i hate the spitfire but u seem to know what u r doin good job next time use a different head maybe?
speedy27920 2 years ago
where can i buy the rit dye?
wrestlingfreak33 2 years ago
AC Moore or any other craft store. Its probably also available online.
EpicFail3431 2 years ago
@wrestlingfreak33 also its at rite aid, CVS pharmacy and mabye safeway
GBear2323 1 year ago
i think pretty much every tutorial ive found has something in it that just ruins it, wether a step in the process is unclear, or the filming is bad and you cannot tell what the person is doing.
but this is a great tutorial man! im planning on doing my first dye job once i buy my new head in about a week.
thanks alot!
416areacode 2 years ago
i heard that dying the head could weaken it and make it more prone to breaking, is this true?
waitingforsynergy 2 years ago
I'm not sure exactly. I can't imagine it drastically weakening the plastic of the head, but I can't say for sure.
EpicFail3431 2 years ago
@waitingforsynergy it doesnt at alll
figureleven 1 year ago
i have a pink head but want to dye it white. do they sell RIT dye that's white? if not how can I change my stick head to be white? i want it to be really white. like pure, solid white. how do i do this??
WickedRealBostonian 2 years ago
They don't have a pure white color. Even if you could find one, you can't really go from a darker color to a lighter color. You can just go from lighter to darker and even then it won't come out exact.
EpicFail3431 2 years ago
@WickedRealBostonian bleach it!
ballindude22 1 year ago
@WickedRealBostonian you can get dye remover dont listen to this guy he does not know what hes talkin about
laxstringer1 1 year ago
@WickedRealBostonian try bleaching it! that could work
Augustosaurus 1 year ago
@WickedRealBostonian Bleach it
tayyp1234 8 months ago
@WickedRealBostonian you can try bleaching the head....
HiKwality 8 months ago
wouldnt the head warp if you leave it in the boiling water?
rideabike1231 2 years ago
I've never had any problem with it warping. The head shouldn't warp because nothing is bending it. It is just sitting in the hot water. Also, when you add cool water to the pan to fill it, that would offset the heat.
EpicFail3431 2 years ago
my head snapped but i can still use it, can i dye that? And can we clean the head anyway we want like with a sponge and regular soap?
savage1083 2 years ago
Yea soap and water work best. I recommend using a nylon sponge because a regular sponge just won't cut it. Goo-Gone comes in handy for stickers and the adhesive on the back of the ball stop because soap and water won't get that out. But otherwise, clean it in any way that won't damage the head. So, don't use laquer thinner or anything that would hurt the plastic.
As for your snapped head, as long as it is plastic, you can still dye it.
EpicFail3431 2 years ago
Not bad, just in very few spots. The pan used for this tutorial was previously used to dye a different head blue. So, as you can see, it doesn't really stain the pan. You may notice a few spots after but you could still do another head in a different color later.
EpicFail3431 2 years ago
Does it stain the pan?
djx7x 2 years ago
i dont think its the best idea to cook a turkey in the pan after you dye your head...
ay3es3de 2 years ago