How To Install Replace Turn Signal Wiper Stalk Cruise Switch GM Car Truck SUV 1AAuto.com

[jbrockett1]

Yes I have a probablem My blinkers don't work only the hazards work I replaced the turn single part and they still don't work I have a 2000 dodge dakota v6 truck eny help please thanks :)

[1aauto]

@jbrockett1 You may want to test the turn signal by putting it on and then testing the socket to see if it has power going to it. I would also check the fuses to see if you have a blown fuse.

[Darb071]

Would this be basically the same procedure for an '88 Buick Electra/LeSabre Estate Wagon?

Thanks

[1aauto]

@Darb071 That application looks as though it uses a different style of switch. The basics might be similar.

[jshedivy]

everything works on mine, but pulling back to switch between high and low beams does not work unless pulling back far and firmly...is there an internal piece that would affect the response of the switch?

[1aauto]

@jshedivy That function is part of the switch also, and could wear out.

[siggersd]

Great vid, could you tell me what's the name of the part that the Turn Signal Wiper Stalk Cruise Switch plugs into?

[1aauto]

@siggersd That would be the wiper switch. We carry them for many different vehicles on our website 1aauto.com

[SrCajita]

Awesome ! I have a problem with mine, the wipers only work on 'high speed' mode, the low and intermitent ones are dead. could it be the switch? or Should I look into something else? like fuses, etc... thanx

[1aauto]

@SrCajita It sounds like it could be the switch.

[ComPrt3]

Would this work for a 1989 Chevey Caprice?

[1aauto]

@ComPrt3 Your 89 Chevy Caprice uses the same turn signal lever. The video should be the same for your vehicle. Hope this helps you out.

[ComPrt3]

@1aauto Worked like a charm. Thanks

[1aauto]

@ComPrt3 Awesome! Thanks for checking out our auto repair channel on youtube. Have a great day!

[84chevyguy]

what would help me is if ur 95 beretta turn signal lever was in stock....?

[1aauto]

@84chevyguy We're working on restocking these. If you add your email to the notify me button, you will receive an email when they are back in stock. Here's a link to them on our website. Hope this helps you out. 1aauto.com/1A/turn-signal-leve­r/Chevy/Beretta/1AZCC00005/334­127/1995

[84chevyguy]

@1aauto ok got my email in there thanks for letting me know... hope u restock them soon...

[1aauto]

@84chevyguy We ordered some new ones for you, they should be back in stock in about 2 weeks. If you haven't, add your email address the the notify me button on the page and the system will email you as soon as they're back in stock to purchase. Hope this helps you out. Have a great day!

[rclee49]

perfect instructions..thank you!!

[shipchips1]

I can't thank you enough, I had half my steering column torn down and couldn't figure out how to get the lever out!!! The shop manual I have is useless!!!! after watching your video, I had the new lever in, in about 15 minutes!!!

Chevy 93 3500 pickup.

Thank You

Jim

[inSanityNPP]

I've got a 77 vette that the wiper stick broke off and needs replaced. Can i use this same concept on that?

[Lomotilian]

Thank you for this informative video. I was afraid I would need to remove the steering wheel on my '85 Suburban - you've saved me a lot of time and effort.

[jerrymmorales]

good idea, tanks

[ladydog72]

My 1983 Grand Prix and I thank you !