phase two clio, rear window tint shrink!!!

[IMartnN]

Thank you for this video it really helped me a lot! Cheers!

[chrisfranknotts1]

I had a go at this today......fucked it up bigtime!!!!

[kevatnorthfield]

had my first go today this lad knows his stuff

[fastcivic007]

Nice job like

[scyzoryk24]

amazing experience

[ruty1978]

thanks for this vid . have just learned a bit more about wet shrinking . good job!

[MultiXANTIA1]

On witch temperature you setup the dryer at shaping the foils

[MCsiskatrah]

can anyone tell me what that mean , WET or DRY shrinking ? and what is easy way to do shrinking and how ?

[thoms12]

How do you get the tint to stay in position when dry shrinking?

[hestafesta]

Hard window to tint, good job mate.

[mtmtint]

can you write me please what film you are use ?

[GDarrenn]

After you do this... Can you just pull it off? or is it hard to pull off

[klmbrt]

ya i started tinting and heat wet shrinking first, but when i found dry shrinking my life changed, you should really look into it, its so much easy.... wet shrinking is harder, longer and always causes creses and crinkles

[gansnek]

not so great

[Dougs1977]

dry shrink it, wet is so slow!

[laptop145]

Bueno esto me ayuda un poco veo que no es tan complicado hacer la luneta del clio 2..hay que practicar..soy nuevo en esto pronto voy a colocar polarizados en autos..gracias por el video, lo haces muy bien

[VadersApprentice91]

great job shame you have to take it off an put it on the inside now :O

[royanl]

omfg, thats ugly! pull it off. Its tinted by standard.

[AUTOMIHAI]

The tint used is a special one? I mean it's written on it "heat shrink", or you could use any tint?

[timk1764]

you can use any tint

[chrism1169]

hes not even dry shrinkin it.that wet shrinkin is 90s.

[unimatrix666]

This guy is newb.. he didnt even do the full JOB!!!

[chrism1169]

this guy is a donkey.i could dry shrink that window in 2 to 3 monutes.

[graphikptz]

add your vid-answer

[muslimjoe]

WOOOOOOOOOOO Ten Men at the end there!!!!

[fosgatefan]

There are easier and faster methods that window can be done in half the time! But to actually do a window like that wet requires alot of skill! Good job!

[levon1246]

whats that heat gun called

[UNHOLY916]

leyon1246......

its called.... wait for it... a heat gun. they are all do the same thing, n=brand dont mean shit.

[tintmessiah1]

Ive been tinting for about 10 years and im a certified instructor now, first off this guy should be dry shrinking this window I could do this one in oh about 2:00 min. Second if he was gonna wet shrink he should be using a different card, the gold card is too soft to shrink with. Oh and if you look close you can see he even creases it twice... lol this guy is a beginner.

[roverturbo1]

hi all . come to my tint shop and you will c me do a clio rear window in 1 also a new shape 206 and any year ka as well.

[car852]

promiscuous tints. woot

[ShaunC0nn0lly]

i think i know what im talking about im a window tinter and you have to do this screen in 2 parts. also hes shrinkin it hes not applying it .

[damrock]

Alot Of idiots that speak like they know what there talking about on here.

He's not applying the window tint to the outside of the window he's just shrinking it to get the exact size and then it fits straight into the car on the inside.

[First2ner]

ahmmm...why from outside?

[Paraman25]

my best bud has been tinting for over 20 yrs and he does this with a blow torch. Pretty cool.

[ipfreely458]

Dude, that was awsome.

[fleego17]

dude u really are pro at this, you make it seem so easy, i cant do this without bolloxing it up, i either overheat the tint or crease it,and i wouldnt even attempt it on a clio back window

[myusernameisoriginal]

i swear the tint is suppose to be on the inside of the car not the outside.. :S

[qofbored]

And how would you make a large piece of tint like this fit on the inside without this proces beforehand, smartypants?

[fleego17]

exactly lol

[fleego17]

exactly lol

[bdawg4snow]

it is on the inside when it is applied. this is just when it is shrunk to fit the curvature of the glass that the tint is on the outside

[Shinta786]

look @ the glow reflection of the metal threads of the hair dryer......HOT

[Arlind86]

do u do the upper part first then bottom? or it doesn't matter?

[Shinta786]

doesn't matter....you can even do half upper, half down and again

[weedfan]

welp , hate to say it. but u gonna die

[truespur]

slow down. take your time fam

[ANIMAL7tfl]

i think strips are easier

[Arlind86]

strips could be easier , but they look like shit inside

[tazluv2003]

and they look shit outside...coz u can just tell uve used strips..

[casey350z462]

look at that bragging bitch below me, on his video he doesnt clean and does everything ass backwards. any body can be that fast if you do a sloppy cut and clean, and im positive it looked like shit. remember quality not quanity dork

[mytints]

WATCH THE MASTER TINT (MYTINT)

[kennydre]

The key is to to split the big fingers into 2 or 3 smaller ones that are manageable, before you push them down. He's mastered that technique.

[casey350z462]

one word buddy, "bounce". i couldve shrunk it twice it that amount of time. oh and nice creases and burned edges. water, dryer sheet, and let it dry. then add your wet line to secure it in place then shrink. thats a one and half minute window. try it.

[ANIMAL7tfl]

glad someone feels same way i do

[kirkpatrickdavid]

you can use the adehise side against the outside window to make your tint shape as it is the same inside, but in the year windows its back to front. easy way to avaoid this: use adhesive to shape on rear window and stick it on the oposite one

[meade916]

anyone who thinks he is tinting the outside is a dumbass hahahh

[xrhonda50]

he is fagggg

[Cruizer2169]

Well I can tell no one here really knows anything about tinting.....you have to shrink the film from the outside to match the curves of the window etc.....that way when he goes and applys the film to the inside of the window he doesn't have problems with it bubbling etc and basically looking like crap....In my opinion he knows what he is doing.....and everyone else needs to shut up.....

[littleste85]

inside or outside doesn't matter,he's a hero!! the fastest one i ever saw!!!

[mytints]

free windowtinting questions  windowtinting@comcastdotnet

[peeman112]

does it matter if u do te inside or the outside

[desvious]

hey I completely agree with jwoody I cant beleive how far you puhed that film, with the film we use... it just wouldnt shrink that much. I would've done it dry too.

[iiKster]

So do you ppl tint the windows on the outside of the car???? Here where i live we allways ply the film on the inside, the result is much more glossier and the film doesnt come of in the winter when we scrape the ice off the windows :)

[weedfan]

no man, its just to shape it out. then tint on inside.

[wowlandon]

You know what you're doing, but ought to make life easier for yourself by using the soap shrink method. much easier less stressful!

[19carlos89]

haha what a joke.. i wanna see this guy do a cutlass or saturn. rookie

[pauliscool2991]

dude you dont have a single video, your the f'in rookie

[weedfan]

ya die loser

[ag07811]

stop leaving stupid comments, and get a life!!

[seracis]

At least you know what you are doing. However, the title of the clip referred to your "tinting" the window in 5 minutes. You shrank it in 5 minutes. Technical difference. You should really try the dry shrink method. You would have cut the shrink time in half.

[jwoody8]

Nice job mate. What brand of film are you using. We use solargard and its harder to shrink than the stuff you are using. If I tried pushing the finger bubbles you were pushing out, our film would have creased for sure. The fil you are using looks thinner and stretchier than what we use? What is it?

[marcolb55]

wow great job buddy.Take a look at my videos.

[marcolb55]

Is it realy cold out their..??It recently snowed,here.That has'ent hapend in a long while.Great work..Try it dry..POst some more videos..