Soundcraft Delta 32 Mixer Console repair service noise gain

[DiazWins7626]

LINK amazon.com/exec/obidos/ASIN/B0­03TSEFJ2/catgr-musicalinstrume­nts-20

Product Description

Soundcraft Mixer

The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R. This 19” rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also ...

For more details please copy the Amazon link above in your browser

[fm711]

I have a Yamaha MX12/4 stereo mixer. Every other channel (odds numbers) do not work. I was wondering if there is a likely culprit. I am not sure what happened, but someone said that the problem may be related to overloading the insert. It is possible that I tried to use the channel one insert as the input for an acoustic guitar with effects and sent too much power through that channel? Where would I look for a common component that would cause the other channels to fail?

[robstorms]

There must be some. Check with some pro sound companies and see who does their gear.

[ObservationAlaska]

where does one find a tech when they live in arizona?!!

[fillyfresh]

Thank you, you are obviously a legend in your own right ;)

Top tips...

[MrNalRam]

You can get soundcraft parts etc from audioguides-n-mods on eBay

[robstorms]

I would say it is a problem with control settings but the fact that the bad channels are all 8 apart is fishy. Sorry I can't offer any advise. i can't think of a defect that would do that. Make sure it is not operator error. It usually is when I am the operator

[MoonGhostMusic]

I have Soundcraft Ghost 32/ problem with group 2 when I input channel 2/10/18/26

i GET CHANNEL READING SIGNAL AND SIGNAL IS LIT ON GROUP 2 BUT NOT ON

CONTROL ROOM LEFT AND RIGHT SO NO SIGNAL ON RECORDER ? CAN i FIX MYSELF ? NO TECH CLOSE TO ME..THANKS IN ADVANCE.

[SophicMedia]

awesome video, I have a used Soundcraft Spirit LX7 mixer that has the mute light stays or intermittent on when the button is disengaged, please advice on what might cause that. Thanks.

[rainbowsalads]

hi : )

i noticed on each channel at the top by the pre amp pots there are additional toggle/flip type switches , i wonder what they are for?

[cipmars]

It IS a common problem, I've encountered this problem on an LX7 and on a Series2

[randallquan]

thanks for the good info. I'm thinking about pickup up a used (of course) 8 chan. SR w/ a group output LED ladder that doesn't function. I'm currently using a Spirit M12 as a front end - any comments on comparing the SR with the M12 as far as sound?

[thebola82]

i have a question.. do you knew where i can get a power supply for a dda cs3?? ive been looking everywhere but cant find anything

[robstorms]

sorry but no

[FreshMusicAustralia]

@thebola82 i've got a power supply for a CS3 ... am trying to sell the whole desk so if I don't or you make me an offer I can't refuse ;D then maybe it's yours! cheers

[thebola82]

@FreshMusicAustralia i only need the power supply.. what would be your price for it?? i dont know how much to offer i dont want to offend with an offer that may not be good..

[readerwriter]

Hey mate, awesome watching you, love your work, love your work.

[robstorms]

I use Caig DeOxit; the little tiny full strength bottle if I can get to the contacts directly, the spray if I can't. It seems to work fine; other cheaper stuff( maybe even spit) might work as well. I think most of the battle is to get something wet on there to wash off the crud.

[bcfilmandsound]

can you (or anyone) recommend the best cleaner for jacks and where to get it? Very great tips thank you!

[nightfly1985]

I use DEK contact cleaner, it is a deagreaser and a silicone lubricat. The one I used is safe for most plastic, very inportant so that cheap pot's don't brake on you. Seen this when I used brake cleaner for though job's but it works.

Bob

[WhoresOfBabylon]

Useful vid, I use a 24 track Delta at home, Just fixed a problem by just cleaning inside the affected area, but I`ll certainly bear your tips in mind if ( or rather when )I need to service it again

[vintagevibekeyboards]

Good troubleshooting tips, especially removing three modules to get more length on your multipin connector.

[rokuez]

awesome video i'm looking to trade my labor for a delta 200 24-4-2. what do you think they go for now a days?

[robstorms]

Sorry, don't know. I would check Ebay. For a small fee you can check past auctions and sales up to 90 days old. Good luck !

[micropod]

Very usefull to know. May have to do a bit of repair to mine when I turn it on. Thanks robstorms. :-)

[patchcords]

Thank you for the tips !