But I'm not surprised as i have played with thermite my self. Even if there is enought heat it takes some time to melt the steel, due to the energy needed.
When placing thermite "open air" or just behind a big plate, most of it ends up as molten iron at the wrong place or is spread out over a big area and cools down too fast
Those cutting containers put the heat to the right spot and concentrate it to a small spot so less steel has to be molten to make a cut (= less energy needed)
@punxsutawneybarney So the whole towers were rigged with such neat inner steel casings (I wonder how could "they" hide that) and connected by wires all together. It all survived the plane impact and then was activated in a rapid succession which resulted in "squibs" that surprisingly aren't glowing.
Despite the fact that huge inward bowing of the exit hole walls was observed, which is a direct evidence of a failure NIST described.
I think it's "a little bit" overstretched. Goatse style.
@endimion17 How do you know they were steel casings? Maybe copper or aluminum casings were used. Why would wires be needed when wireless ignition would be neater? Actually there are pictures and video that seem to show glowing column ends. NIST has not explained how a partial failure on one side propagates at the speed of sound to the other side of the building across a robust, cross-braced, and highly redundant forest of 47 core columns.
@punxsutawneybarney You clearly don't understand the purpose of such casing. You could've as well said it was a paper casing.
It would be logical for such casing to be something which will melt at high temperature, in order to hold the melt while it does its job, don't you think? And it still doesn't explain how can it be synchonized. Because it CAN'T. You know nothing about demolition.
Glowing column ends? I'd like to see that.
Speed of sound? Whst the fuck are you talking about?
Wow.... network tv attempting to disprove the power of thermite. If myth busters actually had the *correct* ratio of iron oxide to aluminum, there would be nothing left of that car. Now add the aluminum from the aircraft to the available iron in the building, ignite 5000 gallons of jet fuel and tell me it wasn't a conspiracy.
@avslogger "If myth busters actually had the *correct* ratio of iron oxide to aluminum, there would be nothing left of that car" Do you really believe that? You realize how much was left of the car. If they mixed it wrong, only like 10 % would be mixed right, compared to a complete burnout with 100 % complete mixture... I don't think so.
BTW I don't think you would create much thermite reaction from solid aluminum (as in planes), at all.
How is Jonathon Cole's work even relevant to the WTC buildings? If thermite could not cut those steel-beams without modifying the beams first - then it would not work.
@PersianPaladin The beams would not need mods, only thermite packaged into cutter containers. As Mr. Cole shows, thermite placed inside the hollow box columns could weaken the column walls. Look near the end of his video "9/11 Experiments: The Great Thermate Debate" to see pictures of red-hot perimeter columns the suggest that's exactly what happened.
@PersianPaladin Perimeter columns had ports at the base so bolts could be installed. In core columns, incendiary materials could have been sprayed in through a hole drilled in the box column's steel wall.
THESE TESTS LACK THE WEIGHT LOAD ON THE BEAMS just my opinion
blamecanada20 2 months ago
slow the words down. couldnt finish a sentence without the words changing
312shoulin123 3 months ago
@312shoulin123 That's what the pause button is for.
punxsutawneybarney 3 months ago
@punxsutawneybarney i dont want to pause the vid every couple seconds
312shoulin123 2 months ago
Really cool!
But I'm not surprised as i have played with thermite my self. Even if there is enought heat it takes some time to melt the steel, due to the energy needed.
When placing thermite "open air" or just behind a big plate, most of it ends up as molten iron at the wrong place or is spread out over a big area and cools down too fast
Those cutting containers put the heat to the right spot and concentrate it to a small spot so less steel has to be molten to make a cut (= less energy needed)
Ride84XL 4 months ago
It would be great if someone actually cuts through a VERTICAL column.
Oh wait, you can't do that with thermite.
Seriously, people, do you even listen to yourselves?
endimion17 5 months ago
@endimion17 You didn't watch the video. Jonathan Cole cuts through vertical columns.
punxsutawneybarney 5 months ago
@punxsutawneybarney So the whole towers were rigged with such neat inner steel casings (I wonder how could "they" hide that) and connected by wires all together. It all survived the plane impact and then was activated in a rapid succession which resulted in "squibs" that surprisingly aren't glowing.
Despite the fact that huge inward bowing of the exit hole walls was observed, which is a direct evidence of a failure NIST described.
I think it's "a little bit" overstretched. Goatse style.
endimion17 5 months ago
@endimion17 How do you know they were steel casings? Maybe copper or aluminum casings were used. Why would wires be needed when wireless ignition would be neater? Actually there are pictures and video that seem to show glowing column ends. NIST has not explained how a partial failure on one side propagates at the speed of sound to the other side of the building across a robust, cross-braced, and highly redundant forest of 47 core columns.
punxsutawneybarney 5 months ago
@punxsutawneybarney You clearly don't understand the purpose of such casing. You could've as well said it was a paper casing.
It would be logical for such casing to be something which will melt at high temperature, in order to hold the melt while it does its job, don't you think? And it still doesn't explain how can it be synchonized. Because it CAN'T. You know nothing about demolition.
Glowing column ends? I'd like to see that.
Speed of sound? Whst the fuck are you talking about?
endimion17 5 months ago
You forgot "Brainiac"...they were able to cut through steel as well
kccalden 5 months ago
@kccalden Were they the ones who cut through a small Dutch car?
punxsutawneybarney 5 months ago
@punxsutawneybarney No they cut through a steel safe...watch?v=8a2OeWS3G-A
kccalden 5 months ago
hey
good video xp
sara417288 6 months ago
Very cool thanks for recommending
GDMFSOB13 8 months ago
Could you post the source of the videos? Great job.
8real 8 months ago
Wow.... network tv attempting to disprove the power of thermite. If myth busters actually had the *correct* ratio of iron oxide to aluminum, there would be nothing left of that car. Now add the aluminum from the aircraft to the available iron in the building, ignite 5000 gallons of jet fuel and tell me it wasn't a conspiracy.
avslogger 9 months ago
@avslogger "If myth busters actually had the *correct* ratio of iron oxide to aluminum, there would be nothing left of that car" Do you really believe that? You realize how much was left of the car. If they mixed it wrong, only like 10 % would be mixed right, compared to a complete burnout with 100 % complete mixture... I don't think so.
BTW I don't think you would create much thermite reaction from solid aluminum (as in planes), at all.
ChrisG140907 8 months ago
Great vid !! Thank you for directing me to it.
katyu16 9 months ago
How is Jonathon Cole's work even relevant to the WTC buildings? If thermite could not cut those steel-beams without modifying the beams first - then it would not work.
PersianPaladin 9 months ago
@PersianPaladin The beams would not need mods, only thermite packaged into cutter containers. As Mr. Cole shows, thermite placed inside the hollow box columns could weaken the column walls. Look near the end of his video "9/11 Experiments: The Great Thermate Debate" to see pictures of red-hot perimeter columns the suggest that's exactly what happened.
punxsutawneybarney 9 months ago
@punxsutawneybarney
How could they place them inside the box-columns without cutting away the steel first with torches?
PersianPaladin 9 months ago
@PersianPaladin Perimeter columns had ports at the base so bolts could be installed. In core columns, incendiary materials could have been sprayed in through a hole drilled in the box column's steel wall.
punxsutawneybarney 9 months ago
this is really good. the text goes by pretty fast, but other than that excellent information.
theOfficialYukaflux 9 months ago