your hose blocked the movement of the butterfly valve in the carb. it was jammed at one throttle level. you may want to try modifying the air filter housing to attach the hose, and allow the natural vacuum of the intake suck in the fuel
I think its awesome what you are doing with hydrogen, however, two things... what is confusing the hell out of me is the fact that the first time you put the hose into the bubbler to show its producing hydrogen, on your way to set down the camera, the hose fell on the ground when you tried to put it into the carb. then when the camera is set down, magically the hose is already in the carb.
how does your fuel cell work when you dropped the plates in with out any electrical source connected
i am convinced this will run a lawn mower engine, but as with converting one to run on propane.. you can simply put a hose on your torch nozzle and poke it in the carb and start opening the valve till you can start it.. and as i have found.. the higher combustable fuel.. the less air you need so i am wondering if you greatly restricted your air intake.. you might get a bit more of a run on it
Good project, hope you get more output of gas. Something to remember that you are only converting energy from electricity to a gas, so you should make a comparison between an electric lawnmower to your HHO mower to see what works better.
Just so you know the Aluminum is actually what is the power scource. So please rename your vide to " Lawn Mower running on Aluminum" Oh yeah by the way its already patented.
How goes it? It will work that is for sure as I have already seen it on youtube. Now the trick is to feed it enough hydrogen so you can open up the throttle and put it to work and cut grass. Good luck to you. All The Best Chris
Sir, i believe there is too much nitrogen present where the gas meets the carb.May i suggest to Seal off where you place the hose in the carb then let it fill with HHO gas for a few moments to push out the pre existing air(mostly inert pesky nitrogen).That should do the trick.Nitrogen is the enemy! GREAT VIDEO - IT WILL WORK !
All i saw was a dumb kid achieving nothing... these HHO scams are really getting on my nerves, all they are is a botched up way to get hyrogen, we alreasy know! hydrogen! can be used as a fuel, it comes from water after electrolosis but its not, WATER! you dip shit.
If you don't like my and others videos just don't watch them. And dont even put comment. I bet you dont have any work to do, so you come here and act like you are real genious.
Its easy to talk trash to a kid when you are sitting at your computer masturbating with your dog. Get off your butt and prove this doesn't work. Hydrogen is much more flammable than gas moron. Go get an education and stop wasting our time...
did you have to make and changes to the engine to get it to run on 100 % hydrgen ? ive been trying to get mine to run and i just get pop backs i also tryed my push mower and it runs for a few seconds and dies out can you please tell me how to fix this ?
I didnt get 100%. Im now very bussy, I have being transfered to other city. So my hobbies will go down. Only things I can do is summer times. But I can make Newman Motor touht.
I think you should try increase your HHO production by not using B.Soda, but NaOH or KOH. It will increase production many times!
I did get this thing run mostly 25 seconds or more. But after that container started make little jumps and water steam was extrimely hight! Then container melted down :)
You are very close. The lawnmower will run but you MUST retard the timing for a later spark to adjust for the premature ignition of Hydrogen. Gasoline burns @ 14,000 fps and Hydrogen burns @ 40,000 fps. Retard the timing a few degrees. Your lawnmower has a "keyed" timing. Adjust it at the flywheel.
I realy don't know. But when it produce near 5LPM it are realy something, if it blow up. So I was on some distance from this cell, I didn't want all that NaOH water will fly on me. It was realy risky, but I did hear blow ups 2 times, and they happened in carb. So nothing did blow up. Nice video response!
itsekkin koitin ruohonleikkuriin omaa, sain jopa toimii se vähäksi aikaa, kunnes johdot(yli 20A) sulatti vähä kantta ja tarvii korjausta, en ole ehtiny videota tekee.
sain kuitenkin otettua tosta rosterilevyistä videon silloku se oli iha tuore :)
Hienoa!!! Hei mul on tosiaan tollanen sama roska-ruohonleikkuri kotona, tarvinee jossai vaiheessa sitä kennoa kehitellä..
Eikös tossa olisi ollut parempi laittaa se letku sinne bensasyöttöön eikä sinne ilma-aukkoon, jos käytetään ainoastaan HH0:ta ensisijaisena polttoaineena?
Mut älä kuitenkaan tankkiin laita sitä, se muute räjähtää aika ilosesti ku painetta kertyy sinne ;-) :D
Oh I watch it now. That was a great video of your setup. It seemed that a couple times it wanted to get running, but gas reserves ran low, so it quit. That was great, and I heard you did it again and it ran ^_^! Hope your new hydroxy cell will work out greatly.
Hey Careica! Good job! Easy enough with alum and an akaline solution :) No need for pesky electricity. It looks like you are half way to running it :) Either more aluminum, or what about a water bottle collector between your cell and your engine where you could build up a little of the hydrogen before it is injected :)
That contaner will blow up like that, You should get something else to run the gas into, Just one backfire and BOOM
oldtrucker63 9 months ago
drill a hole in the back of the carb a put a pipe nipple on it so the butterfly valve can move
mortie806 9 months ago
your hose blocked the movement of the butterfly valve in the carb. it was jammed at one throttle level. you may want to try modifying the air filter housing to attach the hose, and allow the natural vacuum of the intake suck in the fuel
jarvideoproductions 1 year ago
I think its awesome what you are doing with hydrogen, however, two things... what is confusing the hell out of me is the fact that the first time you put the hose into the bubbler to show its producing hydrogen, on your way to set down the camera, the hose fell on the ground when you tried to put it into the carb. then when the camera is set down, magically the hose is already in the carb.
how does your fuel cell work when you dropped the plates in with out any electrical source connected
vindennl48 1 year ago
@vindennl48 chemical reaction. Potassium Hydroxide (KOH, Lye) water and aluminum = hydrogen, and a lot of heat, koh and water are dangerous
Me102288 11 months ago
i am convinced this will run a lawn mower engine, but as with converting one to run on propane.. you can simply put a hose on your torch nozzle and poke it in the carb and start opening the valve till you can start it.. and as i have found.. the higher combustable fuel.. the less air you need so i am wondering if you greatly restricted your air intake.. you might get a bit more of a run on it
tonydow98 1 year ago
It never ran???
cw3849 2 years ago
It do if you put more input of hydrogen.
Careica 1 year ago
@Careica where do u get hydrogen like that
christhetromboneguy 1 year ago
Try putting the hose on the air intake.
camwhitney 2 years ago
cool man keep at it
wuhlei 2 years ago 3
Thank you very much.
Careica 2 years ago
Nice video. Make sure you have a good seal around the tube going into the carburetor so that the hydroxy doesn't evaporates to the atmosphere
finalflash16 2 years ago
Good project, hope you get more output of gas. Something to remember that you are only converting energy from electricity to a gas, so you should make a comparison between an electric lawnmower to your HHO mower to see what works better.
Stay SAFE!
sebring98 2 years ago
combine gas and hydrogen will be a good idea
thegreatkoua 2 years ago
the hydrogen goes up so the engine would barely get any of the hydrogen to burn in the engine.
vinee94yo 2 years ago
Nice job.keep up the good work !!
rainmaker0909 2 years ago
cool video. I could hear it catching on but then died but it was very clear that it could run on it. good work :)
brahmamurti 2 years ago
Just so you know the Aluminum is actually what is the power scource. So please rename your vide to " Lawn Mower running on Aluminum" Oh yeah by the way its already patented.
ddanvos68 2 years ago
aluminum as a fuel source? you are a genius!!
vernieman21 2 years ago
what is an Hydrogen Cell ??
\
skaterdude1229 3 years ago
Hydrogen Cell mean cell, whitch is made to produce Hydrogen (H) and Oxygen (O) from water using electricity.
Careica 3 years ago
Um, hydrogen ascends when exposed to the atmosphere. you need to seal off the input so it doesn't escape into the air.
omnivisone 3 years ago
HI Careica
How goes it? It will work that is for sure as I have already seen it on youtube. Now the trick is to feed it enough hydrogen so you can open up the throttle and put it to work and cut grass. Good luck to you. All The Best Chris
KeyToSucceed 3 years ago
Sir, i believe there is too much nitrogen present where the gas meets the carb.May i suggest to Seal off where you place the hose in the carb then let it fill with HHO gas for a few moments to push out the pre existing air(mostly inert pesky nitrogen).That should do the trick.Nitrogen is the enemy! GREAT VIDEO - IT WILL WORK !
thx1966 3 years ago
All i saw was a dumb kid achieving nothing... these HHO scams are really getting on my nerves, all they are is a botched up way to get hyrogen, we alreasy know! hydrogen! can be used as a fuel, it comes from water after electrolosis but its not, WATER! you dip shit.
560254491054016 3 years ago
I didnt call it water fuel you fuck!
If you don't like my and others videos just don't watch them. And dont even put comment. I bet you dont have any work to do, so you come here and act like you are real genious.
All you are, is stupid fuck, Im telling you!
Careica 3 years ago
Its easy to talk trash to a kid when you are sitting at your computer masturbating with your dog. Get off your butt and prove this doesn't work. Hydrogen is much more flammable than gas moron. Go get an education and stop wasting our time...
brown55061 3 years ago 4
Haha! That was good! "...masturbating whit your dog..." -Some straight fact to that dumbass mr. 560254491054016
I do videos only for reason, if somebody is interested and want try it too! I don't make no money from it. I do my own research.
Hydrogen = Future
Careica 3 years ago
did you have to make and changes to the engine to get it to run on 100 % hydrgen ? ive been trying to get mine to run and i just get pop backs i also tryed my push mower and it runs for a few seconds and dies out can you please tell me how to fix this ?
dahduke 3 years ago
I didnt get 100%. Im now very bussy, I have being transfered to other city. So my hobbies will go down. Only things I can do is summer times. But I can make Newman Motor touht.
I think you should try increase your HHO production by not using B.Soda, but NaOH or KOH. It will increase production many times!
Careica 3 years ago
I think there was more power produced by pulling the cord than from the HHO. Also, what effect would adjusting the choke or throttle have on this?
In the end it looked as if adding gasoline would have helped........
PJZap 3 years ago
I did get this thing run mostly 25 seconds or more. But after that container started make little jumps and water steam was extrimely hight! Then container melted down :)
Careica 3 years ago
Well that's pretty impressive... As a workout machine.
FreeGlobalEnergy 3 years ago
Whoa dude you need a bubbler or you might have a nasty explosion from your generator :(
Be safe and keep trying!
petertrast 3 years ago
You are very close. The lawnmower will run but you MUST retard the timing for a later spark to adjust for the premature ignition of Hydrogen. Gasoline burns @ 14,000 fps and Hydrogen burns @ 40,000 fps. Retard the timing a few degrees. Your lawnmower has a "keyed" timing. Adjust it at the flywheel.
excell4God 3 years ago
what happens when that engine backfires and youre hho generator blows up.
kwacz 3 years ago
I realy don't know. But when it produce near 5LPM it are realy something, if it blow up. So I was on some distance from this cell, I didn't want all that NaOH water will fly on me. It was realy risky, but I did hear blow ups 2 times, and they happened in carb. So nothing did blow up. Nice video response!
Careica 3 years ago
jea kenno toimii, toihan on passiivikenno?
itsekkin koitin ruohonleikkuriin omaa, sain jopa toimii se vähäksi aikaa, kunnes johdot(yli 20A) sulatti vähä kantta ja tarvii korjausta, en ole ehtiny videota tekee.
sain kuitenkin otettua tosta rosterilevyistä videon silloku se oli iha tuore :)
riku2015 3 years ago
Olin Tallinnassa vähän yli viikon, joten en mitään ole nyt vähään aikaan tehnyt. Mutta nyt voi taas jatkaa näitä rakentamaan.
Careica 3 years ago
dude make a resurve tank then wait i min or 2 so the pressure can build then it should run
XboxNerd08 3 years ago
how did i miss this ?your on my subscription list.
nice try there
m3sca1 3 years ago
I dunno. Still, now I can make Hydrogen Cell produce more than that, then I could run this motor.
RuneM13 3 years ago
Sorry, I wrote on my brothers account.
Careica 3 years ago
On the lines of a "Cornish" cell(google that)nice going!
madbillt66 3 years ago
kait sä tiiät että vety on ilmaa kevyempää?
imukuppi 3 years ago
Tiedän. Kuinka niin?
Careica 3 years ago
Hienoa!!! Hei mul on tosiaan tollanen sama roska-ruohonleikkuri kotona, tarvinee jossai vaiheessa sitä kennoa kehitellä..
Eikös tossa olisi ollut parempi laittaa se letku sinne bensasyöttöön eikä sinne ilma-aukkoon, jos käytetään ainoastaan HH0:ta ensisijaisena polttoaineena?
Mut älä kuitenkaan tankkiin laita sitä, se muute räjähtää aika ilosesti ku painetta kertyy sinne ;-) :D
riku2015 3 years ago
No se bensa tulee tuonne kaasariin kummiskin, joten se on parempi laittaa suoraan kaasariin ne kaasut.
Kiitos kommentista! Toivottavasti sun kenno toimii pian myös.
Careica 3 years ago
Oh I watch it now. That was a great video of your setup. It seemed that a couple times it wanted to get running, but gas reserves ran low, so it quit. That was great, and I heard you did it again and it ran ^_^! Hope your new hydroxy cell will work out greatly.
Ben.
BasementBen 3 years ago
Yes. Mostly did run 25 seconds. Now I can build my Hydrogen Cell.
Careica 3 years ago
Hey Careica! Good job! Easy enough with alum and an akaline solution :) No need for pesky electricity. It looks like you are half way to running it :) Either more aluminum, or what about a water bottle collector between your cell and your engine where you could build up a little of the hydrogen before it is injected :)
jesslessthemess 3 years ago
This was just try, that can I run it or not. I am building now better Hydrogen Cell and wish it could power my lawnmower.
And I did tonight test this again, run mostly 20-25 seconds.
Thank You For Comment!
Careica 3 years ago
well I'm not sure of your method of gas production other than it must be some sort of plumbers acid and aluminum good luck
waynedavisband 3 years ago
This was just proov that I can run motor on hydrogen. Now I will make cell that will make hydrogen+oxygen. Called Hydrogen Cell.
Careica 3 years ago