I'm building my first GEET Fuel Processor now, and I'll be making a video of the unit running a small gasoline powered engine with the vapor fuel system. Then I'll be building a GEET Fuel Processor for my automobile, and will document on video the differences between the stock fuel system, and GEET performance, fuel efficiency, and reduced tailpipe emissions.
Anyone that would like to build their own GEET Fuel Processor can google GEET International and GEET friends home pages for the free small engine build plans. Keep in mind that GEET uses gasoline vapors to run the engine, which significantly increases fuel efficiency and can run any gasoline powered engine under full load.
Hey guys, my brother and I have been working on his geet engine. We are having trouble with the carb setup with the tank, but our bubbler setup seems to be running fine. Any suggestions?
This is wonderful! You guys are great and should be celebrated for your work. So from the video it seems you must have some gasoline in order for this to work? Why haven't I heard any of this on the news? Again, you guys are great, please keep working on this and making it better for us all.
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at -thegeetguys-
We hope to have our car running soon. Again--thank you
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at -thegeetguys-dot com
We hope to have our car running soon. Again--thank you
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at - thegeetguys -dot -com
We hope to have our car running soon. Again--thank you
The first test that you should have done was to run the engine on gasoline only. Connect a large syringe that has milliliters marked on the side to the outlet hose from the bubbler tank. Watch this video showing the setup (watch?v=xhF2ESXq-WM)
Now you can precisely measure how much gasoline the engine normally consumes per minute.
Do this test at least four or five times to obtain a good average. Then repeat the test that's in your video but add the precise amount of gas that the engine normally consumes per minute then see how many minutes it runs.
SIGH...i hope you guys realize that your not gonna get rich. Your gonna end up dead just like the rest of the free energy inventors....Stan Meyers being the founding father of HH0 technology btw.....you really think the New World Order and the big oil companies are gonna let you do what u want and jepodise their Trillions of Dollars per year profits?...Greed is the downfall of all men.....Of course you wont but....give out the plans for FREE to as many as possible while u still have the chance!!
@guestnz The plans are already free at the inventors web site-geetinternational-dot-com. This isnt about being rich, its about helping everyone out. We wanna make a buck, sure! but its first and foremost helping out mankind:)
@TheGeetGuys you people are no different to the oil companys, you want to help mankind lol yeah rite, you want some paper with coloured pictures on it, ye are still stuck in the material time warp that has humanity enslaved!! ye are slaves to a jew god (money) im not some stupid peace out hippie!! but i can see ye are of no value to geting mankind out of the trouble we are in, post a video showing everything exactly how its made so people can watch for free and blow this whole thing wide open!!!
@ravetunes you stupid ignorant cunt. i would be you till your face is so swollen you can see or breath. you can talk shit online but your still worthless NO BODY. you have never accomplished ANYTHING in your miserable life so why dont you get your dads dick out your ass.
@JohnsEngine Hey John, This was a bubbler only demo. Carburator engines are going to be posted soon. We are official GEET dealers and only provide the specific info on a paid consult basis. Our rod, however looked like it was spun in a GEET reactor. You can view our web site and email us in a week or so for more info. Again, more videos and indepth looks will be posted soon. Thanks for viewing and the nice comment.
@JohnsEngine Hi John, Our informational page of our website is up. We have also joined Facebook and will be on Twitter as well. The rod video will be up by Monday, June7th. We have not only magnetized steel but also glass:)
I'm building my first GEET Fuel Processor now, and I'll be making a video of the unit running a small gasoline powered engine with the vapor fuel system. Then I'll be building a GEET Fuel Processor for my automobile, and will document on video the differences between the stock fuel system, and GEET performance, fuel efficiency, and reduced tailpipe emissions.
150MilesPerGallon 1 month ago
Anyone that would like to build their own GEET Fuel Processor can google GEET International and GEET friends home pages for the free small engine build plans. Keep in mind that GEET uses gasoline vapors to run the engine, which significantly increases fuel efficiency and can run any gasoline powered engine under full load.
150MilesPerGallon 1 month ago
FRAUDS
novachevyguy 2 months ago in playlist More videos from TheGeetGuys
Hey guys, my brother and I have been working on his geet engine. We are having trouble with the carb setup with the tank, but our bubbler setup seems to be running fine. Any suggestions?
DIVINATORY 1 year ago
This is wonderful! You guys are great and should be celebrated for your work. So from the video it seems you must have some gasoline in order for this to work? Why haven't I heard any of this on the news? Again, you guys are great, please keep working on this and making it better for us all.
David B.
dbadal1 1 year ago
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at -thegeetguys-
We hope to have our car running soon. Again--thank you
TheGeetGuys 1 year ago
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at -thegeetguys-dot com
We hope to have our car running soon. Again--thank you
TheGeetGuys 1 year ago
@dbadal1 Thank you for the nice compliment. We are an authorized GEET dealer licensed through the inventor Paul Pantone. You can visit our web site for more info at - thegeetguys -dot -com
We hope to have our car running soon. Again--thank you
TheGeetGuys 1 year ago
Part-1
The first test that you should have done was to run the engine on gasoline only. Connect a large syringe that has milliliters marked on the side to the outlet hose from the bubbler tank. Watch this video showing the setup (watch?v=xhF2ESXq-WM)
Now you can precisely measure how much gasoline the engine normally consumes per minute.
ke4uyp 1 year ago
@ke4uyp I will post a video of the test shortly.
TheGeetGuys 1 year ago
Part-2
Do this test at least four or five times to obtain a good average. Then repeat the test that's in your video but add the precise amount of gas that the engine normally consumes per minute then see how many minutes it runs.
ke4uyp 1 year ago
SIGH...i hope you guys realize that your not gonna get rich. Your gonna end up dead just like the rest of the free energy inventors....Stan Meyers being the founding father of HH0 technology btw.....you really think the New World Order and the big oil companies are gonna let you do what u want and jepodise their Trillions of Dollars per year profits?...Greed is the downfall of all men.....Of course you wont but....give out the plans for FREE to as many as possible while u still have the chance!!
guestnz 1 year ago
@guestnz The plans are already free at the inventors web site-geetinternational-dot-com. This isnt about being rich, its about helping everyone out. We wanna make a buck, sure! but its first and foremost helping out mankind:)
TheGeetGuys 1 year ago
@TheGeetGuys you people are no different to the oil companys, you want to help mankind lol yeah rite, you want some paper with coloured pictures on it, ye are still stuck in the material time warp that has humanity enslaved!! ye are slaves to a jew god (money) im not some stupid peace out hippie!! but i can see ye are of no value to geting mankind out of the trouble we are in, post a video showing everything exactly how its made so people can watch for free and blow this whole thing wide open!!!
ravetunes 8 months ago
@ravetunes are you the stupidest cunt online or what? sounds like your gerbile bit your asshole again and you had to take it out on someone.
selfinflcted09 1 month ago in playlist More videos from TheGeetGuys
@selfinflcted09 why dont you go and suck your mothers cunt you smelly fuckin nigger
ravetunes 1 month ago
@ravetunes you stupid ignorant cunt. i would be you till your face is so swollen you can see or breath. you can talk shit online but your still worthless NO BODY. you have never accomplished ANYTHING in your miserable life so why dont you get your dads dick out your ass.
selfinflcted09 1 month ago
@selfinflcted09 ive accomplished more than picking bags cotton you fucking ... NIGGER!
ravetunes 1 month ago
@selfinflcted09 /watch?v=qzU9cNO53PM
ravetunes 1 month ago
Awesome job geetguys.
genesiscoupe1 1 year ago
@genesiscoupe1 Thanks for the nice compliment. Congrats to you too.
TheGeetGuys 1 year ago
Very neat setup...
afdhalatifftan92 1 year ago
Good work!
I recommend to use a carburetor (or two in line) instead of a bubbler.
How does your rod look like after your tests?
If you make more videos of your tests, it would be nice to get some information about your setup like material of the rod, length, diameters, etc.
Thank you!
JohnsEngine 1 year ago
@JohnsEngine Hey John, This was a bubbler only demo. Carburator engines are going to be posted soon. We are official GEET dealers and only provide the specific info on a paid consult basis. Our rod, however looked like it was spun in a GEET reactor. You can view our web site and email us in a week or so for more info. Again, more videos and indepth looks will be posted soon. Thanks for viewing and the nice comment.
TheGeetGuys 1 year ago
@TheGeetGuys I understand that you can not give out too much information. I am looking forward to your website. How is it going?
Do you have pictures of the rod?
JohnsEngine 1 year ago
@JohnsEngine Hi John, Our informational page of our website is up. We have also joined Facebook and will be on Twitter as well. The rod video will be up by Monday, June7th. We have not only magnetized steel but also glass:)
TheGeetGuys 1 year ago
.. great job geetguys ( with that sugar , must be the sweetest geet around )
o2baenergyfree 1 year ago
@o2baenergyfree Thank you. We at geetguys like the saying 'My Geet is HOT!'
LOL. But it is a sweet Geet. Thanks again for the nice compliment.
TheGeetGuys 1 year ago
Guys well done please provide a LOAD always when demonstrating GEET
ashtweth 1 year ago
@ashtweth It is our first GEET. We are planning alot more to come in the next week.
a 1.5kw old army generater. We will provide some load on it:) Thanks for looking.
TheGeetGuys 1 year ago
Are you using a steel rod in the Pipe? Just wondering if it realy is making that much of a difference.
M~R
monkeyron 1 year ago
@monkeyron Yes, steel rod bought from home depot.
TheGeetGuys 1 year ago