Added: 2 years ago
From: LPEpower
Views: 86,554
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (116)

Sign In or Sign Up now to post a comment!
  • where can you buy one of these

    

  • I like how it almost sounds like a real v8, almost.

  • this people are crazy!!!!

    but I´m crazy to

  • Diesel Mustang :D

  • Did you but this a put it together or did you create it yourself? :)

  • @Warrior56KMA I made this myself.

  • It's funny how I ran into this...

  • hear that baby purr

  • @AloiWheelz  compressed air*

  • @AloiWheelz These engines don't overheat because they are not internal combustion engines. They run off of pressured air. Belt drive in Lego would end up being a failure because no one makes belts that small; having a fan would be a waste.

  • ok that has only 5

  • Who needs V12 when you can get V2

  • cool sound

    

  • COuldnt you technically make an exhaust for it? air is released from the engine right? Next thing you know there will be hundreds of these cars modded out haha I want one!

  • the engine rocks and everything!

  • you need a clutch and a t-5 trans in it, and it would be perfect!!!!!!!!!!

  • dam they put a LSD on the car, nice!

  • Cool combining of legos and rc car!!.....ilike it very much

  • another question ninjasco...how much PSI do you feed into this thing and on AVG how much horsepower and ft-lbs of torque do u think it gets...

  • at idle this awsome thing sounds like a deisle :D duramax v8 ftw

  • whish differenzial does it have?

  • put a manual tranz in it....CLUTCH IT..!!

  • that is a BEAST!!!! that is prob a 1-2 HP lego v8

  • LOL, sounds like an old 292 with solid lifters (and bad top end oiling) common on the 292's. :-D

  • I was half-expecting you to be behind the wheel. :P

  • put a clutch in it

  • hwo did they make that differential? its pretty sexy

  • OMFG!!!

    It's a PLASTIC ENGINE!!

    That's amazing:D

  • make a transfercase and have 4 wheel drive for a lego truck

  • more like a v4 ? :P

  • @Laserchicken88 no. count the yellow pneumatic "pumps" and you'll see:P

  • Just amazing video

  • thats awesome

  • do you notice a different in power form the 3 cylinder to the 8 cylinder??

  • @markljesse There's a big difference.

  • y does it have 4 cylinders even tho the vid says v8? sadface... :(

  • @561inurface I see 8 cylinders... count again.

  • @nicjasno srry but i still see 4 cylinders...

  • @561inurface There are 4 yellow cylinders on each side.

  • looks like a 4 cylinder

  • it need a turbocharger ^^

  • back to the future!

  • Haha, brilliant!!

    I love the way even though it's lego, it still has that V8 sound (just without the bass lol)

  • you guys are crazy - but i like it!

  • How much torque & HP does this baby get?!

  • @firebat42 lol

  • @firebat42 its got about not even a third of 1 HP no torque

  • @MarinePkG no torque due the fact that lego axles are so flimsy?

  • @firebat42 probably psi? he just pumps air into it

  • @firebat42 its 0.00000000000003 horsepower

  • wow , lots of pneumatic , i want to build some like this but i don't know how ; [

  • I prefer that one than the inline 3 cylinder

  • why are the engines so expensiv

  • Comment removed

  • how do you build what things, they is so cool

    i will have one of them TO!!

  • i swear i saw this and reverted back to a 10 year old in nothing flat.

  • @maleek34k Okay?! XD Ain't it the truth!

  • where do you get these engines??

  • they build em. and sell em

  • it shakes like the REAL THING

  • put a mock super charger on it...or a turbo! that would sound sick =]

  • ho my god!

  • It's a rear wheel drive car,so that means you can make it drift if you're gonna make it wireless

  • i love how the engine shakes like a real engine would lol

  • Did I see pneumatic suspention?

    If I did, It's awsome!

    If I didn't, It's still awsome!

  • The cylinders are used as shock absorbers.

  • really nice!

  • I want one of these...

  • is one of the cylinders not hooked up or something?

  • Whats the top speed on this beauty?

  • 15km/h

  • @nicjasno 15km/h??? thats INSANE!!!

    Good work, man. Absolutely ASTOUNDING. Your videos deserve MILLIONS of views.

  • you could put a compressed air tank on it to make it portable then all you need to do is fill the air and have a motor on the valve regualter then it would be awsome!!!!!!!!!!!!!!!!

  • It sounds like a truck V8 diesel engine!

    The actual rpm range is also similar!

  • Can it run on a CO2 cartridge?

  • i think so

  • The compressed gas expanding would cool down the motor, freeze up the rubber and send it to a slow crackling death ;<

  • you should add a few beams to steady the engine

  • I actually think it looks cool when you run the engine at high RPMs and the Big-Block shakes!

  • engines normaly rock though in normal cars as they are only held by the engine mounts

  • thats amazing

  • what would be better the inline .3 or V8.

  • v8 all the way

  • you should put a clutch on it.

  • I want one .__.

  • Buy one in our webshop - w w w . LPEpower . c o m (without spaces)

  • great sound

  • We sell the engines, but not the car. If you however wish to buy the car too it can be made for you too. This particular example in the video is mine and is not for sale because of sentimental value and because it's made out of used bricks, some very used. There's no need to be rude though.

  • Btw... the engines are our own designs and we build them from scratch for our costumers.

  • dumbass

    find the engine from anywhere and see if it is in a box other than their website

  • Wow, do a little research before you wreck yourself in a comment.

    He makes them by himself, anyone who had any knowledge at all would be able to see that the only place that sells these engines is his website.

    And you have no proof to back up that these engines arn't of his own design.

    People like you are pathetic.

  • This is soo amazing, i never seen a video of anyone putting a LPE in a car before

  • So awesome! i never seen a video of anyone putting a LPE in a lego car

  • LPE stands for... Lego Pneumatic Engine?

  • Yep!

  • how much do you sell them for

  • did you buy the v8 online

  • NICE!! A mustang that won't rust and leak oil.

  • how fast can it actually go?

  • Roughly 12km/h in the mustang. In the videos it went about 9.6km/h, because the yard offered limited space.

    Of course with a gearbox, it could go faster.

  • oh i thought it had a 3 speed automatic.

    have u tried with gears?

  • did you modified any parts to build the engine?

    and what kind of diff did you used?

  • he uses a very large differential, custom built, all lego. and yeah he does modify the valves a bit... they are too stiff if you dont.

  • MUCH better than the inline three in the stang imo. If your gonna build a lego muscle car, its gotta be a v8. :)

  • how is this possible

  • O.O

    You are the master of lego!

  • Yes

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more