@BrailynHimself
You could try contacting 7-ball music and talk to them.
You need the DEEP case 25 inches plus lids, the shallow ones will NOT work.
I have not used a OSP snake, However for the price, I would if I needed one.
John
ezjohn1 1 year ago
How many rack units occupies the boards?
SERGIOGOMESbtr 1 year ago
@SERGIOGOMESbtr ,
12 RU (12 X 1.75 inches = 21.0 Inches) This is why it is wise to choose the 25 inch
deep rack (plus lids) as you can leave most things plugged in.
Also be aware not to cover the front as this is needed for the Headphone Jack.
The depth (25") is the main reason i went with the "OPS" case.
Comment removed
tell us how well the software works..
bradtwo 2 years ago
Questions:
1. Did you have to move the rack rails down in the case for the lid to fit when the Presonus SL was installed?
2. What are the fans for? Does the Presonus SL run hot enough to put fans under it?
3. Does the Mixer stick out of the case or is it flush to the front of the case?
imasoundgod 2 years ago
Hi,
1- No, I did not lower the rails, the mixer will fit.
2- The "Blank Panel" can be removed, it is just to keep the case "In Rack," Putting anything in the front (fans) or anything else will work.
"In Rack" means: the front of the case should be a rectangle not a parallelogram.
The Blank is mainly used for shipping to hold the case "in rack", if the case is "Out of Rack", The Lids will not fit.
ezjohn1 2 years ago
3- No, the mixer does not have to stick in front, I did that, and added longer rails as to have more room at the rear for cable hook up.
4- The mixer runs warm, However a fan is not required.
The fans are for other equipment, A Laptop (Runs Hot) goes in a drawer directly below the fans.
Do you know what SKU is OPS is using for this case?
vust3r 2 years ago
I don't know the SKU, I bought it on Ebay from "7 ball music"
Loading...Saving...
Loading...Saving...
@BrailynHimself
You could try contacting 7-ball music and talk to them.
You need the DEEP case 25 inches plus lids, the shallow ones will NOT work.
I have not used a OSP snake, However for the price, I would if I needed one.
John
ezjohn1 1 year ago
How many rack units occupies the boards?
SERGIOGOMESbtr 1 year ago
@SERGIOGOMESbtr ,
12 RU (12 X 1.75 inches = 21.0 Inches) This is why it is wise to choose the 25 inch
deep rack (plus lids) as you can leave most things plugged in.
Also be aware not to cover the front as this is needed for the Headphone Jack.
The depth (25") is the main reason i went with the "OPS" case.
ezjohn1 1 year ago
Comment removed
SERGIOGOMESbtr 1 year ago
tell us how well the software works..
bradtwo 2 years ago
Questions:
1. Did you have to move the rack rails down in the case for the lid to fit when the Presonus SL was installed?
2. What are the fans for? Does the Presonus SL run hot enough to put fans under it?
3. Does the Mixer stick out of the case or is it flush to the front of the case?
imasoundgod 2 years ago
Hi,
1- No, I did not lower the rails, the mixer will fit.
2- The "Blank Panel" can be removed, it is just to keep the case "In Rack," Putting anything in the front (fans) or anything else will work.
"In Rack" means: the front of the case should be a rectangle not a parallelogram.
The Blank is mainly used for shipping to hold the case "in rack", if the case is "Out of Rack", The Lids will not fit.
ezjohn1 2 years ago
3- No, the mixer does not have to stick in front, I did that, and added longer rails as to have more room at the rear for cable hook up.
4- The mixer runs warm, However a fan is not required.
The fans are for other equipment, A Laptop (Runs Hot) goes in a drawer directly below the fans.
John
ezjohn1 2 years ago
Do you know what SKU is OPS is using for this case?
vust3r 2 years ago
I don't know the SKU, I bought it on Ebay from "7 ball music"
ezjohn1 2 years ago