JG M4 A1 Carbine enhanced version review and shooting

[TheLegite]

how do you use the magazine

[vindafin12345]

metal gearbox?and is it worth it?

[YATairsoft]

@vindafin12345 Not only is it metal but the gears are steal, making it very tolerant to high rates of fire and high torque motors. In my opinion, it is very worth it given the price.

[vindafin12345]

@YATairsoft Thank you. I will see how much i make in the next holiday. I will subscribe.:)

[vindafin12345]

metal gearbox?and is it worth it?

[ShadowRogueZX]

i am getting this gun but it is the sr16

[YATairsoft]

@ShadowRogueZX sr16 has rails and flip up sights, this is the m4a1 carbine

[ShadowRogueZX]

@YATairsoft k thanks for the header

[Airsoftgunner17]

does the barrel exstention make the gun more accurate

[YATairsoft]

@Airsoftgunner17 The extension itself does not but I have a tight bore underneath

[coolkidz277]

does this come with tactical rails because i just ordered this gun?

[YATairsoft]

@coolkidz277 No, only the rail on top of the receiver.

[Bernalfingfoe13]

is this gun upgradable sir?? how much did you spent for upgrades??

[YATairsoft]

@Bernalfingfoe13 It's as upgrade-able as m4's come (aka, very upgrade-able). Matrix TBB 590x6.03: $30 (I don't recommend one this long). Mad bull Shark bucking with Fishbone spacer: $12 (these things have actually given me a lot of trouble). AIM hopup: $14 (not necessary). Matrix silencer 230x30: $45 (again, I recommend a shorter one). UTG rail mount: $8. UTG red dot sight: $40.

[freaksofter10]

sorry i meant to say silencer



[freaksofter10]

im getting this gun soon and im getting a longer tight bore barrel with a gemtech sinlencer to cover it ..is that what u did or did u just get a sinlencer?

[YATairsoft]

@freaksofter10 I put a matrix/prometheus 590x6.03mm tightbore and then a silencer over top.

[InFamousStickFigure]

so how many people go up against you a second time when you use that gun in a Airsoft war? Lol.

[Airsoftphenom1]

You can take your carrying handle off to put on ur scope. but nice video by the way

[RLduct]

make some more vids man

[jordantdwp]

The reason why they over look jg is they use to suck and be cheapy

[YATairsoft]

@jordantdwp Used to, but not any more. JG is now a very good and reliable company (at least their m4's are).

[critik100]

@YATairsoft should I get medal or plastic

[YATairsoft]

@critik100 Metal is more realistic, durable, and has Colt trademarks

[critik100]

@YATairsoft thanks

[scurfskate]

where did you order yours?

[YATairsoft]

@scurfskate Evike, but i'd have preferred airsoftgi

[scurfskate]

@YATairsoft oh alright thanks

[N0N0RIRI]

@YATairsoft I like airsoftgi.

[MrNeilgoetze]

what kind of plastic are the receivers made of?

[YATairsoft]

@MrNeilgoetze Some kind of abs but it's really good. I'm a bit rough with it when I play and I've never had any problems.

[blackhawk4088]

jg is the best airsoft brand in china, because the fire rate, and the others is the same as g&p, Tokyo Marui ,and King Arms. the only different is the build material, but it's not to important for me.

[patrick7471]

is there a supressor at the front?

[2cool4u493]

good review. check out my M4 review on my channel. urs makes mine look soooooo weak

[fishead109]

I used the same game with a lipo............I lost three fingers and my ego.

[fishead109]

So, right after this video the gun broke right?

[YATairsoft]

@fishead109 No? This gun is totally fine.

[MyKillsquad]

hey can you take of the front site

[YATairsoft]

@MyKillsquad Yes, but it's not simple

[giansantiago]

@YATairsoft you serious? 2 pins and a allen screw is not simple?

[YATairsoft]

@giansantiago Have you tried, bud? The front sight post does not separate into two pieces, meaning that you're then going to have to remove the flash hider so the sight post can slide off. I don't care what you say, removing a flash hider is not always easy and it's another thing for someone to get frustrated with. To finish it all off, once the sight post is removed, your grips will have no way of staying on because the supporting ring is not attached to anything anymore.

[giansantiago]

@YATairsoft Yes I did it alot of time before with my gun when Im switching it between standard/tactical and did it to my teams M4's aswell, very easy man, I dont know what kind of flashhider you have but its usually a screw on one that is locked by an allen screw lol not trying to raise an arguement here im just suprised there would be someone encountering a hard time removing the front sight post, I guess time for you to get proper tools for this hobby.

[YATairsoft]

@giansantiago Ever hear of loctite? Yea, that's what has the flash hider glued on so tight. I've been playing airsoft and paintball for the past eight years. I have all the tools and knowledge you can imagine, and then some.

[giansantiago]

@YATairsoft Yours is glued? that sucks... well for you anyway. been playing, modding, upgrading for almost ten years now even had a 3 years military training and 5 years of aviation training and in my experience kid. time doesnt mean anything if you can learn everything in less than a year, so dont act all high and mighty like you know me.

[YATairsoft]

@giansantiago Really dude? Don't come on my channel and start arguments. Don't act like you know me either because I have Army experience too (I don't know why you brought that up to begin with, it has nothing to do with air soft). And don't call me kid, bro.

[Stig0fream]

does the silencer work ? or does it always sound like that

[YATairsoft]

@Stig0fream All airsoft silencers are mock, or fake. So, no. It does not silence it.

[JustUDIENOW]

very good metal? really? sounds awesome...

[TheMONDOGORE]

hey how do you take off the orange

[elimidgette]

does it come come with rail grips?

[Beatz1297]

Can you mount rails on the handgaurd?

[griffin1111111111111]

is the hop up glued to the inner barrel or can i use the same hop up when i replace my barrel with a tightbore?

[frank6920]

is this the Electric CSI M4 Commando Rifle that fires over 400fps from hobbytron

[YATairsoft]

@frank6920 yes, but hobbytron is not recommended.

[crazyloco6585]

@frank6920 with .12s

[infinithope]

Can u put like a grip and the little light on this gun ?

[YATairsoft]

@infinithope No this is not the RIS model

[nuclearfish010]

@infinithope actually you can dont listen to this guy he doesnt know what he's talking about, the holes in the handguard are used to put rails on

[ShottysGotShots]

@nuclearfish010 Slow down there buddy. I make these reviews with him and he is one of the most knowledgeable airsofters around. Dont assume someone doesn't know anything about the topic at hand just because they made a mistake. BTW hes still correct. No, you can not take a grip laying around and just throw it on, you need to buy the rails which is an inconvenience to most all people unless thats what you were planning on doing when you bought the gun. Therefore the RIS model is for attachments.

[YATairsoft]

@nuclearfish010 Actually i know exactly what im talking about. I gave him a general answer because getting into specifics over comments takes too much time and explaining which people most always never understand. The mass majority of people who put attachments on handguards just buy the RIS model because the rails are high quality steel. Yes you can put rails on this model but you need to find the right size first and you would still be attaching them to plastic guards which arent very strong.

[TERMINATORNIKO]

@YATairsoft is it possible to replace it for R.I.S cause if yes.....I'LL GET ONE!!!

[YATairsoft]

@TERMINATORNIKO Of course it is. You just have to know how to install them. Or you can buy the model that already has the rails.

[0BluexKoolaid0]

@nuclearfish010 the holes in the railgaurd are for show, copying the real gun.. to put on ris youd have to take them off anyway, and i also make these vids and the guy talking in this one is without a doubt the smartest airstofter, and shopper i know personally.

[nuclearfish010]

@0BluexKoolaid0 who the fuck cares if its "for show" he asked if you could put rails on it and you can.

[0BluexKoolaid0]

@nuclearfish010 how ignorant can you be? he asked if you can put a rail on the gun in the vid.. he responded no its not the ris version. thats it. its physicall impossible to put a foregrip on the gun in the vid without putting an ris on. i suggest you dont comment back. your obviously mad, and its stupid, ignorant assholes like you that ruin airsoftfor all of us.

[ivesaaron]

where i can get one of these????

[poppyxnja]

where did u get that silencer it looks beast

[YATairsoft]

@poppyxnja thanks it's the Matrix 30x230 mm special force, black aluminum silencer

[RageCola]

@YATairsoft do u no how much

[YATairsoft]

@RageCola The silencer I bought? Yea, it was $45.

[SavingPrivateBrian]

What silencer is that? It's sick

[thelordsairsofters]

can some one please tell me what kind of silencer to get?!? i have no idea! and i have heard many people say many difernt things about the fps of this gun. what is the true fps.

[Bl4CKBiRd1]

I bought this gun a little over a year ago and a few months ago I started running a 11.1v. lipo in it and surprisingly when jg says its lipo ready it really is:D With it the gun has a amazing rof!

[apbraley]

NICE GUN! I like the way the Red dot looks when its on the carrying handle but does the scope seem kinda high when its up there or does it feel comfortable?

[YATairsoft]

@apbraley It's actually quite comfortable and not too high at all. This way, the front sight is not in the way of the scope. Plus, due to the design of the carry handle mount, the iron sights can still be used without moving anything around (the rail has a hole straight through it).

[KAUpitcher123]

Can you take that yellow sticker off?

[YATairsoft]

@KAUpitcher123 Yea but it doesn't bother me. I don't feel like sitting there with goo-gone rubbing the sticky stuff off.

[KAUpitcher123]

@YATairsoft haha I'm just thinking about buying it this weekend. Would you say overall it is worth it?

[YATairsoft]

@KAUpitcher123 I originally bought it as a replacement for an m4s i had sold. I was going to use it for a whlie as i saved up for a kwa but quickly fell in love with this gun. What you dont see in this video is that i upgraded the entire hopup chamber (hopup unit, bucking, and spacer (the originals are good but not enough to get real good distance)) and then added a sniper length tightbore barrel. Upgrades totalled only a bit more than $50 and seriously increased range accuracy and velocity.

[KAUpitcher123]

@YATairsoft Yo thanks for your help. I bought this gun yesterday and i LOVE IT! It shoots realllly well and very fast, but its a little inacurrate with .20s, I would get like .23 or so.

[UmbrellaMercinary]

great gun. i own one myself and its awesome. the flash hider is a pain. i tried to take it off and ended up stripping my threads. no biggie. when u said u got 360 fps it mite be other variables cus ive read things where people have got 400 and up.

[Uncforlife77]

I think u did a good job only suggestions are shooting a target so we can see the accuracy and range also maybe just showing how to adjust the sights or hop up stuff like that very nice job though

[YATairsoft]

@Uncforlife77 Thanks. We were going to do a shooting test with an actual person target but we couldn't find one at the last second. There will be a shooting/accuracy/range test coming up soon though.