@HVACKID94 The first you can do is have a service tect come out and determine if it is the condenser fan blade or the motor or the compressor. The best way is to disconnect the compressor wiring and see how much the conderser fan vibrates.If that is ok than try the compressor. I have have been on some jobs where the condenser is over charged and the unit vibrates real bad.But check the fan blade out first, it does not take much to knock them off balance.
I hate disconnects mounted to units. I have never seen flexible gas piping used on the outside of the unit. Everything out in the open is hard piped here, I think it's code and we don't have to many codes. Isn't that drain pan raining on them since it doesn't have a trap?
@tstatech It seem like there never a good spot for a disconnect on a packaged unit. You can use a gas flex on the outside were I live but install to code and maybe have the shut off on the right end.The p-trap is internal the only thing getting wet the roof.
@Nutintoitbut2doit I can not decide which one I like better the disconnect on the access panel or the gas flex! And you guess right !! I live in hackifornia!
@dizziedallas I shot an attic space today with my IR... 152 degrees. Luckily it was a vacation rental, and I was able to put off going up there. Only ~88 deg upstairs... 75 down. Too much heat load on most systems.... well over design temps for the area.
I tell you what , 5tank is absolutely RIGHT ! You do get what you pay for ! Disconnect on Access Panel , I lost it ! LOL. Pure poop ! ROFL.
I went on bid the other day ,she said my price was to high ,billy bob down the street will do it for 2000.00 ,well billy bob ain't licensed or insured, and when billy bob breaks his leg at your home , billy bob will own you ! LOL. Mr. billy bob don't pull Permits ,so when billy bob runs your gas and burns your house down , don't look for sympathy from me !
@dizziedallas That gets a BIG HELL YEA too !!! Billy Bob must be a jet setter , he was back in the Creek again , he must travel between California and Kentucky !!! LOL... Oh BILLY , you piece of BLEEEEP !!! LOL...
He just did a crawl flex job , down the street , billy bob didn't know what Panduit Straps are , now neighbor wants me to fix !!!
NOT !!! LOL...
Great Video Dallas , they just keep gettin better and better !!!
@HVACKID94 The first you can do is have a service tect come out and determine if it is the condenser fan blade or the motor or the compressor. The best way is to disconnect the compressor wiring and see how much the conderser fan vibrates.If that is ok than try the compressor. I have have been on some jobs where the condenser is over charged and the unit vibrates real bad.But check the fan blade out first, it does not take much to knock them off balance.
dizziedallas 1 year ago
@HVACKID94 The rattling could be from a out of balance fan blade it does not take much to put them out of balance.
dizziedallas 1 year ago
I hate disconnects mounted to units. I have never seen flexible gas piping used on the outside of the unit. Everything out in the open is hard piped here, I think it's code and we don't have to many codes. Isn't that drain pan raining on them since it doesn't have a trap?
tstatech 1 year ago
@tstatech It seem like there never a good spot for a disconnect on a packaged unit. You can use a gas flex on the outside were I live but install to code and maybe have the shut off on the right end.The p-trap is internal the only thing getting wet the roof.
dizziedallas 1 year ago
Man they used the old disconnect, and the gas dude you mean the valve goes where lol. You must be in Calif. to.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit I can not decide which one I like better the disconnect on the access panel or the gas flex! And you guess right !! I live in hackifornia!
dizziedallas 1 year ago
@dizziedallas Ya its hard to choose lol. You threw me with the Dallas, but I know with all those rooftops it had to be Cali.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit It is still the wild wild west!!
dizziedallas 1 year ago
@dizziedallas Yes it is my my friend, some days are wilder then others lol. But I would not have it any other way.
Nutintoitbut2doit 1 year ago
Too hot to be on the roof. I'm gonna start working nights to get outta this heat.
FilterChanger 1 year ago
@FilterChanger I feel sorry for you! That heat wave is crazy!! Working at night is not a bad idea!
dizziedallas 1 year ago
@dizziedallas I shot an attic space today with my IR... 152 degrees. Luckily it was a vacation rental, and I was able to put off going up there. Only ~88 deg upstairs... 75 down. Too much heat load on most systems.... well over design temps for the area.
FilterChanger 1 year ago
I tell you what , 5tank is absolutely RIGHT ! You do get what you pay for ! Disconnect on Access Panel , I lost it ! LOL. Pure poop ! ROFL.
I went on bid the other day ,she said my price was to high ,billy bob down the street will do it for 2000.00 ,well billy bob ain't licensed or insured, and when billy bob breaks his leg at your home , billy bob will own you ! LOL. Mr. billy bob don't pull Permits ,so when billy bob runs your gas and burns your house down , don't look for sympathy from me !
fritzhvac 1 year ago
@fritzhvac I saw billy bob down the street the other day on a install now my neighbor wants me to fixes it !!!! NOT!!
dizziedallas 1 year ago
@dizziedallas That gets a BIG HELL YEA too !!! Billy Bob must be a jet setter , he was back in the Creek again , he must travel between California and Kentucky !!! LOL... Oh BILLY , you piece of BLEEEEP !!! LOL...
He just did a crawl flex job , down the street , billy bob didn't know what Panduit Straps are , now neighbor wants me to fix !!!
NOT !!! LOL...
Great Video Dallas , they just keep gettin better and better !!!
fritzhvac 1 year ago
We may have lost this job. The bigger loss will come to the owner later down the line. Typical cheap bid and crap work.
DC4hvac 1 year ago
@DC4hvac That unit is so lousy!! Good thing it's a two story building! Better yet how about the moon!
dizziedallas 1 year ago
Customer gets what they for.
PutSome5tankOnIt 1 year ago
@PutSome5tankOnIt You are right on that one!
dizziedallas 1 year ago
Are those little radius fittings that are tapped into the side of duct their way they're providing fresh air?
ComfortAirCompany 1 year ago
@ComfortAirCompany The radius fittings on the outside are the OSA , most of them are shut off.
dizziedallas 1 year ago