my homemade goped project

[11223marc]

3.5 hp ?

[Purplecactus8]

U should bore out the piston and carb

[rodriesp1234]

Hi! I want to ask you about the brakes. I have the idea of making a goped and thought about using this type of bicycle brakes. What can you tell me about it, does it brake ok?, I mean are they suitable for a city use? I don't want to ride it at high speeds, but, you know, a good pair of brakes is necessary.

[pyroman675]

very very nice dude i love the construction of it its built to last! and built well. looks like a perfect machine to get you were you need to go. but it not a go ped, its just a motor scooter!

[ShanePedley1]

mate that looks beast an nice homemade goped 

[bmxTexas]

i made one and used a 31cc bolens weedeater motor and it only cost me 19 dollars

[DoPe993]

u may be happy on it but imagine what normal people think of you ...

[1BadRobot1]

Nice job! Have you considered sticking a tuned pipe of some description on? i'm sure that would give you a nice power boost and maybe make it slightly less noisy.

[IVIoNsTa360gaming]

dude this is one of the nicest homemade ones ive seen

[PaDdY36o]

thats a pretty good build nice goped :)

[paintballforever24]

nice job man, but spindle drive sucks

[Gumbyable]

get that fucking song off fuck head

[TheMuSi3]

eey kan je me misschien vertellen wat voor moter je hebt gebuikt

[MOIVGSTER]

how did you make that motor mount cause i have like that same scooter but i cant figure out how i will put the engine on

[LvBioDream]

anyone knows where to buy good scooter for making stuff like this??

[lvorangutaanslv]

@LvBioDream Whack-a-mole.

[LvBioDream]

@lvorangutaanslv ok.....

[lvorangutaanslv]

@LvBioDream Oh nvm...I tryed that and i ended up getting raped by One.

[bobchessy]

@LvBioDream get a used cheap electric scooter and either buy a old yard equipment motor or get one off ebay or sometrhing

[nekbiodieselworks]

you've convinced me i have an awesome 4 stroke weed wacker engine thats awesome when it runs. it would be perfect for making a spindle run scooter. now i just need a scooter or small bike

[SNOOPDOG0707]

yea he should buy a goped black magic spindle for a SUPER grip.

[Cowboy332344]

that won't fit. And I've already made grip on the spindle.

[ballores]

i made one for my daughter when the cheapest was about £600 in the uk years ago get a helmet though you'll end up like special ed if you fall off

[Cowboy332344]

It goes only 35 kilometers an hour so in Holland you don't need to wear a helmet with that speed

[krypekeeper]

@Cowboy332344 so because "legally"u dont need a helmet you think that will magically stop the concrete from smashing your face when/if you ever crash?

[shinyfuzzy]

u made a goped. i made a ghetto ped!!! :D

[SNOOPDOG0707]

that looks like a lot of fun to make and it would keep you bizzy for a long time. but that cheap thing is probably going to have major issues in the future. but if your on a budget then this is better than nothing right? good job

[Cowboy332344]

you're right, the bearing inside the engine is carying all the weight because the spindle is pushed on the rear tire. And it is at his end. But I've drivin over 1200 kilometers and it still works.

[ramstaaa]

you cant make it chain drive because the engine is soo small it wont have enough power down low

[Cowboy332344]

of course you can. If you make the front 6 tooth and the back 72 tooth. It works fine but this was easier and I couldnt weld.

[ZakreFactory]

good frame and building, but it you want more performance make some time of gear system, attach a gear to the clutch it may take some time but you will get more out of your engine

[xXHUNTERXxXx]

A for effort. the result is horrible and cheesy especially being roller driven on the tire itself. good job on building it though

[TheStarlightfox]

good job

[YungerYungerKope]

Itss Nice butt you up for havingg a racee by video???

[ciclotronforever]

Nice!!

[Jdogdrums7]

dude what music is that!

[BergluX]

Breaking benjamin - blow me away :)

[NakedNoodles1]

Yer, i don't think the hand trolley wheels will work. Unless i engineer some sort of hub for the sprocket to rest.

[Cowboy332344]

Do you use a chain or a spindle? hand trolley wheels are okay. But you need ones with bearings in it. You can see if they have bearings just by looking at the inside of the wheel;) (where the axle is)

[NakedNoodles1]

I'm making one of these from a electric scooter (converting it). Would anyone know what type of wheels i could use, possibly hand trolley wheels? I'm pretty sure they have bearings but would they be ok for a chainsaw motor?

[dellalain1964]

No helmet or any protection at all... pretty stupid, nice weekend project but what about your security.

[DIYGuy1]

sweet goped i just made one check out my videos

but i want to know what the red thing was at 0:33 and can u tell me what some of the main parts are coz i want to build one like yours

thanks

[Cowboy332344]

that's the clutch house;)

[omgwow918273]

very good job it looks great i wish i had it :D

[Cowboy332344]

thanks man;)

[wayne205stevens]

Ha Ha Thats Brilliant Well done! :)

[bamidrol]

hee man,

best goed gelukt:) ga er denk ik zelf geen maken. krijg een brommer voor mun 16 e verjaardag dus... mare in ieder geval goed gedaan

groetjes barend jeop