My tutorial on how to make an LED controller

[thedubiouslimabean]

would'nt this make the leds stay on all the time even if the controller is off?

[hawkseyed556]

can u use 30 gage wire

[speedtyper106]

Hey this video is actually really helpful. I'm trying it right now and it works. WOW it's cool. Oh and off topic. If I have a boner for more than four hours. Do I call another girl or do I just masturbate to this video multiple times? :D JK

[RRFGuitarman]

Keaton please respond to this... after watching your video ( which was fairly simple and made easy to understand, good job!) i was wondering when the leds turn on.... do they automatically turn on with the controller when you press the middle button? do they turn on with vibration? Other???? Please respond to this !!! Thank you :p

[UNBOUNDxBOOM]

@RRFGuitarman its a rumble mod so when you shoot it will light up its kina simple have you done it yet?

[TyKelly100]

could u use more than 2 sets of wires and solder all of them on the two points

[reblogo]

lol I daren't attempt this!

[xJIayyy]

this dose not work

[INTENSAFIREMODZ]

are you sure you can use a led with less then 3.7 volts cuz i am trying to light up the joist sticks of the controllers i am modding and i thought that they might not fit if the led was to big

[littleman89954]

if ive got them 3mm leds that all i using i got three of them do u no wat resistor i would need

[DJDeeLew]

how many do you use until you would need a resistor?

[kingxlr]

Awesome but what about ps3?

[topaz2118980347639]

hehe....wire "strppers". Is that supposed 2 b a joke????

[codWaWplaya18]

@topaz2118980347639 No its not

[xImPaCtXvIrUsX]

does it just lite up when it vibrates

[lendemen95]

when the leds are working, is it alright?

Because I don't know how much volts the leds are.

[nice8D]

good song

[DAKODA65]

you spelled supplies ,gauge, special, warranty, vibrators, you, long, pieces, .. dont you know i before e except after.. what was it again? damn hooked on fonics

[thaRealHERO20]

@DAKODA65 wow what a no life you have nuthin better to do but comment on his spelling ahha wuht a NErDd

[DAKODA65]

@thaRealHERO20 :p i know lol i was bored

[rottenbunny2]

what type of solder should I use when installing the leds, and also, what watt soldering iron should I use?

[puncker31]

cool song

[CustomYourController]

100 SUB CONTROLLER shell (of you choice)GIVEAWAY. COMMENT. LIKE. SUBSCRIBE.

[M3lvin101]

where do you buy led lights ? please respond

[AIIYourModdingNeeds]

@M3lvin101 radio shack+Ebay

[XxcrazzyXxclan]

@M3lvin101 radio shack

[AchromaticProduction]

hey guys if you have a wired controller you don't need a special screw driver a phillips head screw driver works fine thumbs up so people can see

[Stengun13]

whats the name of the LED lights? when I search for them everything shows up.

[dill1200]

use less than 22 gage

[JEFFTHEGHOST]

do u need a resistor

[EVairsoft]

how many volts is the iron

[redsox639]

all i really staid for war the music

[OneNameMore]

The bit you need is a T8 security bit. Tried the T9 and didnt work only made me go a little more crazy.

[keaton7667]

@TheSimsCreedGuy hey do your self a favor and get a life alright fucking prick

[argentinaboy123]

ok i might do this to my controller but im scared imma fuk it up so i have questions imma a noob learning, ok im making a halo mock 6 helmet right i just fiberglassed it and paded it, now i wanna put LED lights, can i just get some wires hook them up to the LEDS (but wats the maximum voltage i can use for the LEDS) also after wiring it do i have to soilder it to the battery or can i just tape the wires with electric tape to the batteries im srry im new to LED shit so srry plz answer

[Cheezeball99999]

@argentinaboy123 i would think you'd need to solder the wires, but to some kind of battery holder thingy, so you can put in a new battery when it dies (so take part of some random thing that doesn't work)

i'm kinda new to this too, and haven't attempted anything that could blow anything up, but do know something about electricity and batteries and crap

(and have an IQ of 194 to back that up, not to brag ;))

[Tjtakedown]

could you get a lower rez camera

[nickum3]

wow, the whole... hole thing in my controller, not a big fan, why would you not just put some new ABXY buttons that let the light shine through?

[swissyboy19]

cool iron...im stuck with a wired one

[jbullock44]

stupid!

[airsoftgunnie33]

hey where exactly can i get some led lights 4 my controller

[brandon9491]

@airsoftgunnie33 radio shack

[iTouchHacksKid]

@brandon9491 i love how everything u need to mod anything for the 360 u have to geet there

[waterdragon1908]

@airsoftgunnie33 look for a local radioshack

[KiNGSTiLEZ]

Nice video..

Good spelling by the way. haha

[polujanskii]

do u have to use a resistor

[wrs491]

i have that same table lol

[oGxPrOdiiGy]

if you want a modded controller go to my channel. view my modded controller video and in the description is a link to my ebay.. i have a 7 mode stealth new red controller. best deal around!!!

[worthingtown1]

hi um is there any othere wire that can be used and couldnt u just soilder the leds straight on too the place why do u need the wire plz answer?

[keaton7667]

@worthingtown1 yes you could use other wire this wire was my choice becuz i could bend it were i wanted it and you could solder the LEDs straight to the circut bored but i wouldnt recommend it the pins could break easly if moved around to much

[TravisNRG]

˙wont this only work if it rumbles...fuck lol

[STARLARKS]

hi, i've got some 5mm LED's but i don't know what voltage. I looked on the website and they said that they were 2.5v forward and the reverse voltage was 5v. R they okay to use?

[13yaroza]

if you use more leds you wont need a resistor......your very backwards lol

[SuperGunit11]

do u need the rumble pack in

[acexprt]

hey what exactly does a Resistor do? sorry im nobbish

[errorserver3000]

@acexprt yes u definately are ... nobbish

[keaton7667]

@acexprt A Resistor stops to much electricity from goin to the LEDs and making them explode lol it just keeps a certain amount of electicity goin to the LED hope this helps

[DARE2I3ITME]

@acexprt well its a resistor it stops alot of the electricity so it does not get over powered

[cHicKEnKiCKeR15]

nice tut man thx

also wats the song? its awsome lol

[Reconciliasion]

This music fucking kicks ass

[P4KKM4N]

this works but warning only use 2.5 volt leds or higher they stay light lower than that are dim and flicker

[NEXTGENTECHINFO]

Use 30 gauge wire, this allows use to place the mod better and route your wires better.

[hell5634]

its looks like it has rosey red cheaks!!

[MrLilRezboy]

the special screw driver is called a torx screw driver and t9 works but t8 is better

[iFromBroa]

t9 work to so stop saying t8....

[mlstick4]

can somebody plz tell me if this works for sure cuz i might do it but i dont want to mess up my controller???

[NEXTGENTECHINFO]

Yes it does.

[teddivampire]

hah, nice. my controller is now so modded i could probably fly it... >:]

thanks for the tutorial!

[Cheezeball99999]

@teddivampire i want a flying controller :/..

[02926776]

its t8 torx screwdriver

[cronomono]

hey it's a torx t8 screw driver

[NEXTGENTECHINFO]

Torx T9

[jmanmortenesen72]

do u have to have that resister thing in the middle of your controller when u open it at 2:00

[NEXTGENTECHINFO]

Yes, this limits the amount of electricity that can flow to the LED.

[l0lwutnub]

Thx for this, all cost £10 :) Paid my tech teacher £10 and he let me use the school's supplies

[justin7160]

cooolllll.....does this require resisters

[keaton7667]

no just dont use tomany leds or you will need resistors

[poopsh1234]

@keaton7667 how many is too many?

[mul47]

Down and out tantric

[montage12333]

song my friend?

[footballcrazy8499]

does it just light up when the controller is vibrating cause i want to put it into the power button on the controller, but i want it to stay lit all the time till i turn it off.

[keaton7667]

good luck its not easy friend and be careful cuz if wires or anything gets in the way of the guide button it will stick and it will try to shut off your xbox every sec. just so you know

[xAngel0fSorrowx]

wont ur hands cover those?

[keaton7667]

yeah but you thumbs can move if you want them to . point is i put these on to show off so other people are like woah that awesome its not necessarly for your eyes inless your in the dark then you cant miss it lights up the whole room

[flamer4625]

gauge is spelt wrong........

[arsenalrulendmanusuc]

and special

[Lucky4mvp16]

and comfortable

[skitzo5233]

Nice, This is the only vid ive seen that actually shows everything

[mattewa96]

Thanks, good video.

[wormtail113]

i love tantric

[McCablenator]

hi, quick question, I noticed you can add an LED to each side of the controller, using those parts to solder it to just above the rumble packs, but can you solder more than one LED to that certain spot? (if you want 3 or more LED lights on the controller.) cheers

[keaton7667]

yes its possible to put more than two but i would suggest not to use more than 4 cuz it could cause the rumble paks to stop working due to all the power goin to the lights

[smugoogie]

down and out by tantric

[xxrocklee13xx]

what is the name of this song!!!??!?

[6969ROBDOG]

you dont need resistor the rumble only puts out 2 volts of power and hes using a 3.7 volt led suprized it still lights it up

[Mercilessmercyable]

the rumble will not work as you take it out, when you take the rumble out, be sure to cut the wires to keep the circuit complete, it you take out all the wire, down to the white 2pin berg connector then the circuit will not be complete and you will have broken your controller.

[grandtheftaaron]

does the rumble still work?

[F0otba11fr33k]

this sucks dick

[jbala2000]

whats the name of the music???

[Doggfan]

Worrenty???

[F0otba11fr33k]

does it only go off when the virbrators vibrate?

[supersanchez1991]

it goes on when the vibrators vibrate. and off when it stops vibrating.

[dyyylllaannn]

no, but your mom does..

[wwerocks909]

hahha good one

[SolEvil]

Will 24-gauge wire work for this?

[supersanchez1991]

24 gauge will work better than 26 gauge.

[DandMods]

do you need a risitor.

[supersanchez1991]

it be good to use a resistor. 50-100 ohms resistor will work

[pimpnrob]

does it void the worrenty of the 360?

[keaton7667]

no this wont void the worrenty of the 360 in any way but it does void the worrenty of the controller so be carefull

[pimpnrob]

oh thanks i thought i the 360 i already put a L.E.D on my controller

[lFreeRiderFilmsl]

what song

[keaton7667]

tantric- down and out

[codyoo10]

hey thanks for the tutorial god damn microsoft trys to hard to stop modders. the security on the controlers is just way to much i mean i modded my 360 and dident have as much security as controlers.

[ktmorange08]

Where can I get assorted LEDs like that? And do the lights take more battery life? PLEASE REPLY OR SEND ME A MESSAGE ABOUT THIS.

[Goldtacto]

radioshack

[bluefusion99]

Where do I buy Smd 0603 LEDs???

I can't find them anywhere.

Also, how much mcd do I need? HELP!!

[keaton7667]

ya you really cant buy those in stores your goin to have to buy them online like on ebay or an xbox modding site

[wuggshine]

it burned out my leds

[wuggshine]

rumble activated/.... DOES ANYONE KNOW HOW TO DO ONE THAT ISNT RUMBLE ACTIVATED PLEASE REPLY

[GenocideProductions6]

yeah you solder it to the battery pins instead of the rumble pins

[damienjameszimbrick]

man i just wanna know how to change the light color of the big middle button instead of green i want like blur or red

[bluefusion99]

Gauge is even classified as a commonly misspelled word..

[Xtrmn8r123321]

Why doesn't anybody know how to spell gauge?

[c1rca121]

will it void the waranty for xbox or controller?

[legogunguy001]

it does for the controller

[fr3sssh]

and is this go on when u shoot to

[fr3sssh]

where can i buy this screw drive send me a personal message please

[1yoyo105]

radioshack walmart ebay homedepot whereever!

[TheKilabot]

you can use a t9 but I strongly recommend using a t8 torx SECURITY

[fr3sssh]

do u need a soldering iron send me a personal message please

[lilwizz200]

yes you need a soldering iron to connect the positive and negative wires to the the LED then to the pos and neg prongs on the controller

[1yoyo105]

its the first fucking thing he said on the required things noob!

[KYLEDIE8VERT]

I love that song i saw tantric in Concert SUMMER SKORCHER 08

[badboyny123]

do u have to put the lights their

[glennr94]

well done

[ALIENSPANKER69]

y would u want to buy one making one would b so fun

[ecstasyizwhatineed]

lol

[asianvideogamenerd]

how many can you put at a time?

[SYSTEMOFADOWNMANIAC]

how many leds can you solder to the prongs each please send me message

[Shammon35]

im not very good with this stuff

ill just buy one

[southernman621]

kick ass song wats the name of it

[77GunsarfuN77]

Down and Out- by Tantric

[Rcjake97]

song?

[teamextremeisawesome]

im doin this this week

[teamextremeisawesome]

AWESOME!!!!!!!!!!!!!!!!!!!!!!!­

[AM4Nl]

will this work on the new CG Controller?

[skater5y]

5 starss

[alarconedu]

this uses more of your batteries right?

[p8intballkid]

not much because it only goes on when rumble is on and rumble gives off 3v when going full out

[keaton7667]

no i can play up to 4 hours with out it dying or longer

[jamesyu18]

just a question, I dont wanna put holes on my controller..i mean .. i was thinking about the sync button, since I removed my sync button, now theres a little hole there, can I put the led there?

[superduperzipz]

So these light up when controller are rumleing right? How do i solder if i want them to light upp all the time?

[BUugGAttImAN]

Looks mad nice and about to do it but doesnt your hand cover the light when your holding it?

[keaton7667]

thats just were i like them i like to show them off so its mostly for others to observe and i put them so they dont shine in your eyes while your playing thats just me tho

[WishingYuri67]

great, the the controller looked bad at the end

[MONEYYMANN96]

song?!?!?!?!?!?!?!?!?!?!?!?!?!­?!?!?!?!?!?!?!

[keaton7667]

the song is called- /Tantric - Down and Out/

[arklarklark]

thankyou. this is a million times easier than any other video

[MONEYYMANN96]

can u tell me if i am going to need the rumbleing packes

[keaton7667]

no u dont have to use the rumble packs

[73chevy350]

thats N64 nintendo 64

lol

[MONEYYMANN96]

thx i am going to go get the stuff and i am makeing raed firy

[MagikGir]

thanks dude

[AppReviewer]

Thnak you