ill just get a wii with a broken dvd and remove the wiis internal slotload dvd altogether and connect a hdd to the wiis usb and try to mount it inside the nes case,since i like the look of wiiflow and usbloaderGX,then again it might be a problen since i think only1 usbport can be used with homebrew apps,so if want a hdd and a dvd connected via usb i may need use a hub,if that even possible
ok i think i know what you mean,so would it be a good idea to cut 2 trianle shaped peices of plasti and glue them inside the lid ,one on each side of the drawer ,so that it pushes it evenly from buth sides instead of just having 1 in the middle,not sure where u mounted your off to one side or in the middle bu i think one on each side might give make it open easier and more evenly,if im picturing what it look like in my head right,also the sundriver doesnt work woth loaders so im scraping that
so is hard to get the nes door to open and close when the dvd drawer slides in and out?how did you get it to do that?where csan i find a diagram,cause i see alot of these dvd player nes mods on YT so theremust be some plans out there somewhere,
@bulletproof2353 Real simple. on the inside of the door i glued a triangular piece of plastic so instead of the drawer sliding and then hitting the door, it slid and hit the angle of the triangle plastic and pushed the door cleanly out of the way.
with a softmodded wii though,there are 2 programs i think dvdx and another media player or 2 .maybe one of those homebrew apps can play a dvd movie from a dvd drive connected via the wiis usb port,instead of just from the wiis slotload dvd drive,which i wont have,since i will be buying a wii with a broken dvd,and a sundriver chip which replaces the wiis dvd with a 2.5hdd,i just love the way the drawer slides out and the nes door open and closes,i seen wiis inside a nes but w/slotload drives
i want to do this but put a wii inside ,but without the slot load drive,i like the way the nes opens when the dvd drawer slides out,thats the coolest part,so i was thinking of getting a wii with a broken dvd off ebay and putting a sundriver mod chip in it,with a 1tb 2.5hdd,then softmodding the wii,then connecting a pc dvd rom drive via the wiis usp port inside the nes case,& have it so it has the same dvd drawer setup as this 1,dont know if i can play a dvd movie with a usb dvd drive,w/softmod
Why are people so dumb I mean if its bigger than the NES then obviously it wont fit in the NES, Besides moding you consoles for crap there unintnded for is the dumbest shit, seriously why ruin a good console? I'm not a hater just givin my honest opinon that all.
Its simple some1 had a wire hidden at the back connected 2 to the tv and had the real dvd player hidden on the side of the vid and had 2 of the same dvds, they had some1 else press play at the same time as the nes controller and yea!!!
I am always facinated by people that think this is so hard. Once again, all i did was go to a store like walmart, bought a cheap small dvd player, ripped out the guts of the nintendo, and put in the dvd player. All you have to do for the wired controller is connect the wires from the controller button up to the buttons on teh DVD player. anyone with a simple knowledge of electronics and willing to rip apart a dvd player and a nintendo can do this.
I cut a triangle piece of plastic and put it on the inside of the nintendo door. That way when the DVD door pushes forward, it hits an angle and slides the door up and out of the way. Pay attention to your DVD player tray to make sure that having the Nintendo door slide across the top won't hit or hinder the DVD Tray.
@faroth serisouly. dumb ignorant to quick to judge. this isn't some magic show.
what dvd brand / model # did u use? i wanted to do this but hav it fully functional. like s-video outputs in the back of the nes, optical laser 5.1 channel connection, normal 3 rca, power.
@IvoryGecko1993 Not sure. I've never taken apart an Xbox before. Main problem would be if they have a one piece "mother board" which i think they do. That would limit the size of a box you could use, and they try to make the boxes as small as possible already. Xbox is 12" by 10" and an NES is 10" by 8" so not looking likely.
xD For all you know he could be holding the actual remote out of view. That is what popped into my head when I read Turducken's comment because how they got that to work is beyond me as well.
Why does everyone think this is so hard? Yes, I put a small DVD player in the game. Yes I drilled a hole in the front and put the sensor for the remote that came with it there so you could use the remote. And YES I took apart the controller, cut the chip out, soldered the buttons directly to the wires, then on the SNS I took the existing wires that come off the controller, cut them, and wired them onto the Buttons that the front face of the DVD player had. It really isn't that hard.
ok so i made one but a littel blue and white thin cable snapped off the DVD player and now it wont "read disc" but im trying to put it back on...ive never worked witha dremmel tool so much in my life lol
LMFAO retro as hell. Easy mod but a really really cool one. how did u get the nes controller to work as a remote that woulb be the tricky part along with getting the where the disk comes out all shimmed up to come out correctly. Theres alot more to it then you think ladies. how about somone else try to pull this off. its alot harder then it looks... Whover made this you guys rock.. fuck all the haters!!!
Well Thanks. It did take some thinking. The lid is a little easier than you may think. I just glued in a triangle piece so the DVD drawer would slide against it and push it up. Took quite a few tries to find just the right shape though.
The controller is tricky. There is a micro chip to remove so things are hard wired. Then i had to figure out what wire went were, and then solder wires onto the DVD player buttons that lead to the plug in port.
well, i am sorry your life is so terrible but really, why does everyone think it is so hard to put a DVD player in a nintendo? Step 1) go buy a small $25 DVD player. Step 2) rip apart a nintendo and remove everything. Step 3) rip apart the DVD player and put all the insides in the nintendo. Step 4) look online for wiring diagrams to solder together wires from teh controller to control the DVD, and tada, its done.
It is complicated to do, and would be a little different with each different DVD player purchased so i didn't think of having a how to video, but i have gotten so many requests that I may make a second one, or at least make a video showing the insides of the one I made.
that would be cool. just like walkthrough on how you've managed it yourself. People like myself could follow it as a rough template of what needs to be done, applying and modifying it for the hardware we use :-) Still loving the mod!! lol I've got three old NES so.
*laughs* It seems like people are most surprised that I got the controller to work. If you're going to go 80's nostalgic, you need a wired controller =]
1st, all he did was remove the mother board of the NES making the system just a hollow shell, he then placed a small DVD player inside.
2nd, noticed how long it took him to press play? It's because he had a slim DVD remoted taped to the back of the NES controller, he had to press play and A on both controllers simotainliously.
well, it of course is a dvd player stripped apart and put into a hollow NES. That is the point. Although i set it up to work with a remote, i also wired the controller into the play buttons on the original DVD. It takes time because small dvd players are kind of crappy dvd players. what you said would work too, but it just so happens to be not how i did it.
Can anyone do a vid on how to do this!!!! It's the baddest shit ever!!!!! Please don't wanna ruin my NES. I wanna do it right!
NOTORIOUSCARCLUB 3 months ago
ill just get a wii with a broken dvd and remove the wiis internal slotload dvd altogether and connect a hdd to the wiis usb and try to mount it inside the nes case,since i like the look of wiiflow and usbloaderGX,then again it might be a problen since i think only1 usbport can be used with homebrew apps,so if want a hdd and a dvd connected via usb i may need use a hub,if that even possible
bulletproof2353 11 months ago
ok i think i know what you mean,so would it be a good idea to cut 2 trianle shaped peices of plasti and glue them inside the lid ,one on each side of the drawer ,so that it pushes it evenly from buth sides instead of just having 1 in the middle,not sure where u mounted your off to one side or in the middle bu i think one on each side might give make it open easier and more evenly,if im picturing what it look like in my head right,also the sundriver doesnt work woth loaders so im scraping that
bulletproof2353 11 months ago
@bulletproof2353 on mine i just put one in, but yes, i think two, putting one on each side would work best.
faroth 11 months ago
so is hard to get the nes door to open and close when the dvd drawer slides in and out?how did you get it to do that?where csan i find a diagram,cause i see alot of these dvd player nes mods on YT so theremust be some plans out there somewhere,
bulletproof2353 11 months ago
@bulletproof2353 Real simple. on the inside of the door i glued a triangular piece of plastic so instead of the drawer sliding and then hitting the door, it slid and hit the angle of the triangle plastic and pushed the door cleanly out of the way.
faroth 11 months ago
with a softmodded wii though,there are 2 programs i think dvdx and another media player or 2 .maybe one of those homebrew apps can play a dvd movie from a dvd drive connected via the wiis usb port,instead of just from the wiis slotload dvd drive,which i wont have,since i will be buying a wii with a broken dvd,and a sundriver chip which replaces the wiis dvd with a 2.5hdd,i just love the way the drawer slides out and the nes door open and closes,i seen wiis inside a nes but w/slotload drives
bulletproof2353 11 months ago
i want to do this but put a wii inside ,but without the slot load drive,i like the way the nes opens when the dvd drawer slides out,thats the coolest part,so i was thinking of getting a wii with a broken dvd off ebay and putting a sundriver mod chip in it,with a 1tb 2.5hdd,then softmodding the wii,then connecting a pc dvd rom drive via the wiis usp port inside the nes case,& have it so it has the same dvd drawer setup as this 1,dont know if i can play a dvd movie with a usb dvd drive,w/softmod
bulletproof2353 11 months ago
awesome wish i had seen this vid before i threw my nes out damn props bro
MegaKillerclowns 1 year ago
Nice work on placing it inside the casing.
It doesn't take much to put a DVD player inside an NES and carve out some holes for A/V Out.
Fuck.
Metroid225 1 year ago
coolest mod ever!
mariopianofreak 1 year ago
Why are people so dumb I mean if its bigger than the NES then obviously it wont fit in the NES, Besides moding you consoles for crap there unintnded for is the dumbest shit, seriously why ruin a good console? I'm not a hater just givin my honest opinon that all.
abcpat100 1 year ago
looks like u mad a dvd player with a NES shell
EMMWOOT 1 year ago
estoy impresionado ¡¡
XXXxXDANTEXxXXXX 1 year ago
Hey bro! Rock on thats sweet! Do you have plans for that? I have one but I want the controller to do that - cant figure it out!
Feaddesign 2 years ago
Even though I've seen this done like 50 times it's still hella boss! Bro I can't see how people don't get that it is an actual dvd player.
Jonzilla37 2 years ago
some of the newer sony dvd players a hell of small and you could just slide it in there!
goingdownthetubes 2 years ago
I know but people still think this kind of thing is fake.
Jonzilla37 2 years ago
so its a fake
Yoshi53131 2 years ago
Its simple some1 had a wire hidden at the back connected 2 to the tv and had the real dvd player hidden on the side of the vid and had 2 of the same dvds, they had some1 else press play at the same time as the nes controller and yea!!!
Yoshi53131 2 years ago
I am always facinated by people that think this is so hard. Once again, all i did was go to a store like walmart, bought a cheap small dvd player, ripped out the guts of the nintendo, and put in the dvd player. All you have to do for the wired controller is connect the wires from the controller button up to the buttons on teh DVD player. anyone with a simple knowledge of electronics and willing to rip apart a dvd player and a nintendo can do this.
-j-
faroth 2 years ago 3
I'm thinking about doing this, but I always wonder how you get the door to open
hanspeterpitsch 2 years ago
I cut a triangle piece of plastic and put it on the inside of the nintendo door. That way when the DVD door pushes forward, it hits an angle and slides the door up and out of the way. Pay attention to your DVD player tray to make sure that having the Nintendo door slide across the top won't hit or hinder the DVD Tray.
-j-
faroth 2 years ago
@faroth serisouly. dumb ignorant to quick to judge. this isn't some magic show.
what dvd brand / model # did u use? i wanted to do this but hav it fully functional. like s-video outputs in the back of the nes, optical laser 5.1 channel connection, normal 3 rca, power.
did u do n e wire'n work?
thedirtys2006 1 year ago
@faroth Hey. Do you think you can do an XBOX 360 inside an NES?
IvoryGecko1993 1 year ago
@IvoryGecko1993 Not sure. I've never taken apart an Xbox before. Main problem would be if they have a one piece "mother board" which i think they do. That would limit the size of a box you could use, and they try to make the boxes as small as possible already. Xbox is 12" by 10" and an NES is 10" by 8" so not looking likely.
faroth 1 year ago
@faroth Oh well. Nice Video, and have you tried making the NES controller wireless, and program the same features on the Remote to the controller?
IvoryGecko1993 1 year ago
the circuit boards and wires would be too much to fit into that gray box. If only there was a much slimmer version.
Dgamer21 1 year ago
I'm just waiting for someone to put the guts of a PS2 in a Nintendo for the lulz.
RawIronMan 2 years ago
that was exactly what i was thinking before reading your comment
RsOfficialTrailerRs 2 years ago
The problem would be the controller... I imagine switching a NES and a master system, now that would be awesome!
hanspeterpitsch 2 years ago
dont mess with the old stuff
Mimiromaru1219 2 years ago
can anyone ever make a how to video of this?
Yellow5Studios 2 years ago
how u wire the controler?
DeltaNineRnmbr1 2 years ago
Pretty awesome dude. This stacks up with with the Nintoaster and other awesome things. Good job.
rcjs2051 2 years ago
pretty nice mate^^
dvdrom24 2 years ago
Then dude you are amazing because that is awesome and I now want one. xD
NaRuTo44 3 years ago
xD For all you know he could be holding the actual remote out of view. That is what popped into my head when I read Turducken's comment because how they got that to work is beyond me as well.
NaRuTo44 3 years ago
Why does everyone think this is so hard? Yes, I put a small DVD player in the game. Yes I drilled a hole in the front and put the sensor for the remote that came with it there so you could use the remote. And YES I took apart the controller, cut the chip out, soldered the buttons directly to the wires, then on the SNS I took the existing wires that come off the controller, cut them, and wired them onto the Buttons that the front face of the DVD player had. It really isn't that hard.
faroth 3 years ago
This comment has received too many negative votes show
damn you are really in the past dude buy a plasma for goodness sake and a better system f that old shit
1serge6969 3 years ago
If only we all were as rich and smart as you are...
Agencetourix 3 years ago 6
You're a dumbass.
Not everyone is a rich snob who can afford everything they see.
Old school is the shit. Always was the shit. Always will be the shit. Better than this new crap today. So much more originality. And more durability.
Today it's all about graphics. Not gameplay. So take your next-gen cell processor high definition graphics and shove it.
WrestleByte803 2 years ago 2
CAAAA-CHING. you hit that one on the money in my opinion... old school is way better. i'm a nintendo fan but i don't like the wii =P
trappedteen 2 years ago
I never thought I would find myself actually liking the Wii, but oh well^^
hanspeterpitsch 2 years ago
The nes into a dvd player is simple, but how you got the controller to work is beyond me. That dont make sense.
turducken321 3 years ago 2
Very very very sweet
Berati55 3 years ago
lol your a badman! show me how you did that... i need that in my life!
skandalukuk 3 years ago
They called them NES tapes but,NES DVDs? That's awesome!
Luckbay 3 years ago
ware did you get all the stuff from to do this and how did you know how to do it
projectink 3 years ago
All you need is a small cheap DVD player, an old nintendo, and some electronics knowledge and no fear of tearing both apart and putting them together.
I have another DVD and nintendo, I may make a how to video this winter.
-j-
faroth 3 years ago
I'll be looking forward to that if you do it!
Noyjeetut 3 years ago
And the Nintendo gamepad is used for its remote, too!
VicGeorge2K6 3 years ago
lol that just takes some cable mods and that you make your Nes into a PC.
tenkikun 3 years ago
how'd you get the controller to work too?
that's a far out difficult mod i'd love to learn.
kudos, and i absolutely LOVE Hackers.
adashjay 3 years ago
You have to hook the button cables from the nes controller to the button cables from the dvd player.
danielkraak 3 years ago
i love that movie and nice mod!
Zerocool818 3 years ago
The controller is puzzlin' me too.. How did you get that to work?
digglerbadger 3 years ago
wow thats really cool just i dont how the controllor (sorry if i spelt controllor rong)
how it make make the input for the dvd open otamatacly to the NES
stewyzachy 3 years ago
ok so i made one but a littel blue and white thin cable snapped off the DVD player and now it wont "read disc" but im trying to put it back on...ive never worked witha dremmel tool so much in my life lol
armyperson59 3 years ago
LMFAO retro as hell. Easy mod but a really really cool one. how did u get the nes controller to work as a remote that woulb be the tricky part along with getting the where the disk comes out all shimmed up to come out correctly. Theres alot more to it then you think ladies. how about somone else try to pull this off. its alot harder then it looks... Whover made this you guys rock.. fuck all the haters!!!
JohnOsborne06 3 years ago
Well Thanks. It did take some thinking. The lid is a little easier than you may think. I just glued in a triangle piece so the DVD drawer would slide against it and push it up. Took quite a few tries to find just the right shape though.
The controller is tricky. There is a micro chip to remove so things are hard wired. Then i had to figure out what wire went were, and then solder wires onto the DVD player buttons that lead to the plug in port.
I may make a video showing the inside for ideas.
faroth 3 years ago
hell yea creative as hell!!
JohnOsborne06 3 years ago
fake like my life
Fuzzy192006 3 years ago
well, i am sorry your life is so terrible but really, why does everyone think it is so hard to put a DVD player in a nintendo? Step 1) go buy a small $25 DVD player. Step 2) rip apart a nintendo and remove everything. Step 3) rip apart the DVD player and put all the insides in the nintendo. Step 4) look online for wiring diagrams to solder together wires from teh controller to control the DVD, and tada, its done.
-j-
faroth 3 years ago
niice.
MsSkateboardP 3 years ago
very cool! how'd you managae it? is there a site or tutorial vid i can look at to try to make one myself?
welldone on a cool mod!
hawko84 3 years ago
NO site yet.
It is complicated to do, and would be a little different with each different DVD player purchased so i didn't think of having a how to video, but i have gotten so many requests that I may make a second one, or at least make a video showing the insides of the one I made.
-j-
faroth 3 years ago
that would be cool. just like walkthrough on how you've managed it yourself. People like myself could follow it as a rough template of what needs to be done, applying and modifying it for the hardware we use :-) Still loving the mod!! lol I've got three old NES so.
hawko84 3 years ago
it's a compliment
ScReWaTtAcKeD 3 years ago
nice video.
javoman13 3 years ago
not bad, man
i wish that DVD player was real
except an Super Nintendo Version
that looked outdated, man
no offense...
UltraDOG17 3 years ago
WTF???
Buzardero 3 years ago
Its called 'retro'. The coolness comes from it being a 1985 console.
MetalGearN30 3 years ago
Exactly!
-j-
faroth 3 years ago
lol you a genuis man that fah
jon204 4 years ago
sexual
SaDinski5 4 years ago
at the beginning u sounded like a mix of tucker and caboose from red vs. blue
ScReWaTtAcKeD 4 years ago
*Laughs* well, regardless of how you meant that, I'll take it as a compliment.
-j-
faroth 4 years ago
thats cool
garrettroy69 4 years ago
Gay! Wired controller!
jk, really cool.
5amGordon 4 years ago
*laughs* It seems like people are most surprised that I got the controller to work. If you're going to go 80's nostalgic, you need a wired controller =]
faroth 4 years ago
Except if you play with the Atari wireless controller ;)
hanspeterpitsch 3 years ago
ok thats cool
N64ROCKS 4 years ago
o no he did not
nephew455 4 years ago
I can very easily explain how he did this.
1st, all he did was remove the mother board of the NES making the system just a hollow shell, he then placed a small DVD player inside.
2nd, noticed how long it took him to press play? It's because he had a slim DVD remoted taped to the back of the NES controller, he had to press play and A on both controllers simotainliously.
daboog 4 years ago
well, it of course is a dvd player stripped apart and put into a hollow NES. That is the point. Although i set it up to work with a remote, i also wired the controller into the play buttons on the original DVD. It takes time because small dvd players are kind of crappy dvd players. what you said would work too, but it just so happens to be not how i did it.
-j-
faroth 4 years ago
also the ram is 2 rubbish for a film
masterchiefisawomen 4 years ago
way cool!~
westlifelover92 4 years ago
Very awesome, I am curious on how you did it.
Sylisfox 4 years ago
Haha Hackers. How appropriate for this video. And When the Hell is some one gonna make a schematic for this mod?
hazonku 4 years ago
i love the movie, good job
GameFreakUnlimited 4 years ago
hackers the film is shit hot and good job
xcolincookx 4 years ago