chopper bike 49cc 4 stroke

[boringquiet]

how much for one like the one i just saw

[tmccread]

@boringquiet dunno really i no the engine kit it a bit over 500 the rest is quess work



[mpcguy]

i think you need taller handlebars

[n057828]

Yeah rip off mbbimports like $600 bucks ebay au minus the blet drive BUT with chain $220 bucks...big w big beach cruiser $130...

[miketv]

put some pants on

[TheIndustrialphreak]

like your gearbox, did you cut the baffle out of the stock muffler. how do you keep the muffler mounted, no matter what thread locking compound i use it allways rattles off.

[Donninator1]

ebay....

and in canada: zoombicycles

[childofgod19882007]

where can i find one of those motors to mod my bike

[tmccread]

@childofgod19882007 google mbbimports australia

[Scootertuner1000]

I have made several motorized bikes, but always with the 2 stroke motors. Next one is going to be the 4 stroke. I am going to switch the pulleys on the belt drive to CVT pulleys from a scooter, that will give gearing, rather than a fixed ratio. Should pull an easy 45mph then. Your arse is dangerously close to the spinning back wheel. You'd be well fucked if a part of your clothing got in there.

[tmccread]

@Scootertuner1000 cvt good idea!! make a step by step vid it;d be interesting. yeah the back wheel was close but meh... the belt drive hitting my leg hurt more then a few tugs on the shirt!! i start work on my next bike soon!!!

[Scootertuner1000]

@tmccread I am going to see if a Comet torque converter will fit (it's a CVT). Why don't you put a cover on the pulley system. I will def post a video.

[tmccread]

@Scootertuner1000 cause i love the open belt on harleys and thought it mildly resembled that . i lernt quick not to pull my leg in, in a turn! ive sold the bike on now.. sadly

[Scootertuner1000]

@tmccread I don't know but it seems to me that the 4 stroke bike engines are better built than the 2 stroke ones. They seem smoother and just as fast, which is unusual, normally I would think a 2 stroke is faster.

I have built 1 mountain bike and 4 beach cruisers all using the 80cc (they're really 66cc) 2 stroke engines that have the manual clutch. Just peddle up to a few mph and dump the clutch to start it.

[tmccread]

@Scootertuner1000 they are good but the 66cc are cheaper i had one of the 1st ones before every thong wearing kid with a motorcrosss helmet started to do it. i got it from zbox.com 49cc on an old giant mtb rode it everyday for 3 months 30klm to and from work now i love em

[Scootertuner1000]

@tmccread zbox, you must be in Oz, right? I found a nice all black 80cc 2 stroke on ebay for $109 U.S. plus $30 shipping. Walmart has a nice Huffy Cranbrook Cruiser for $84 or a Schwinn touring bike for $99.

The video I have on here was also a Cranbrook Cruiser. That actually went really well, 52kph per a digital bike speedo. Held it's speed up hills well too. I didn't have a speedo or lights on it in the video though. You can connect normal dynamo lights up to the kill switch wire.

[TheIndustrialphreak]

You got me fired up about my next build, is it the honda engine kit or the clone kit you have their? wicked frame setup.

[tmccread]

@TheIndustrialphreak i was gunna build another one based on the jessie james chopper bicycle but just bought a postie with ape hangers instead

[thegreatkoua]

that is loud man

[IRONMAIDENFAN2006]

i feel sorry for the guy who bought this bike off this guy his clutch is gone.. motor full throttle and slipping

[tmccread]

@IRONMAIDENFAN2006 centrifugal clutch man there spose to do that till engine speed meets output speed

[POOK1126]

What kind of bike is it? I like the frame, would like to build one using same frame if you could help me out with a brand and model.... Thanks

[tmccread]

@POOK1126 ed roff rat fink... or something

[POOK1126]

What size are the handle bars?

[tmccread]

@POOK1126 dunno the front wheel is 24" and they look taller than that so maybe 26" well im 6'1" and they came upto my shoulders

[samod1990]

i will be propably making one out of this img1(.)classistatic(.)com/cps/­kj/100813/289r6/5228mj1_20(.)j­peg

[crazyhobo85483]

how much money goes into building one of those

[samod1990]

@crazyhobo85483 i would say about 300-500$ depend on how cheap u get the bike the engine cost about 140$-150$ thats the 66cc/80cc 2 strokes as this one is the 49CC 4 strokes it cost about 300$ lets say u buy the bike for 200$ + engine 150$ or 300$ u will end up with about 300-500$

[crazyhobo85483]

@samod1990 not cheap but would be a good project, thanks

[mechanicojoe]

open belt drive FTW!!!!!makes it look like a mini primary belt hehe

[BalsactheJawsofJake]

hey man where are located if i can ask

[tmccread]

@BalsactheJawsofJake this was bradbury campbelltown australia, the bikes in victoria some were now!!

[BalsactheJawsofJake]

@tmccread cool cause i live at narellan so how much does it cost for you to build one

[tmccread]

@BalsactheJawsofJake all up about $800 but i was lucky to find the bike a cheep as i did. i'd say to do it again would be almost $1500 if ur keen ill find all the info i had!

[Mentorcase]

Ha ha the pedals dont even work.

[tmccread]

@Mentorcase the pedals do work, there is just no need cause it got a centrifugal clutch

[62rome]

cheesey rider

[Nevawake]

so that was u who woke me up that morning when i was trying to sleep in! DAMN

[tmccread]

trust me its really not that loud, i had a 2 stroke pipe on it once b4, that was loud

[lindz8686]

how much did this cost ya to build?

[tmccread]

all up about $800 but i was lucky to find the bike a cheep as i did. i'd say to do it again would be almost $1500