Can you tell me the kit you use for this, like what kind of needle? I'm having a hard time with CISS, the black always have a problem, always clogged nozzle.
i took the sticker off, poked a small hole in it. Put abit of water in it and it worked. Well i really needed to print this thing off so yeah, water was fine
can i use scotch tape instead of that plug to cover up the hole? :| that's what he did for refilling the color cartridge... and is that water or alcohol in the tissue?? :|
i have a simpler solution for this. at 0:38, at the middle of the cartridge you can see that there is a tiny hole like thing. take a syringe, poke it in there and fill the ink. after filling just put the canon sticker back on. no need to put a plug!
@Dibyasmail If you encounter error after refilling the cartridge. All you have to do is this.
For MP Series Printers: Press and hold the STOP/RESET button down for 5-8 seconds, it will allow you to override the counter. The cartridge will print , however, the ink level display may not show.
Can you tell me the kit you use for this, like what kind of needle? I'm having a hard time with CISS, the black always have a problem, always clogged nozzle.
chot76 1 week ago
i took the sticker off, poked a small hole in it. Put abit of water in it and it worked. Well i really needed to print this thing off so yeah, water was fine
Zenziba95 1 week ago
you can use any tape inetead and cover refill hole, is water
refillhouse 4 weeks ago
can i use scotch tape instead of that plug to cover up the hole? :| that's what he did for refilling the color cartridge... and is that water or alcohol in the tissue?? :|
hotdog020292 1 month ago
วิธีเติมหมึก Canon PG-810,Canon CL-811 พร้อมรูปภาพประกอบ รับข้อมูลของลิงค์ ผ่านเมลล์ได้เลยครับ
loxwill 5 months ago
วิธีเติมหมึก Canon PG-810,Canon CL-811 พร้อมรูปภาพประกอบ
loxwill 5 months ago
I used 26 no. needle to refill through tiny hole in the center behind sticker. the ink dribbled from the printer head immediately
medicobombay 5 months ago
i have a simpler solution for this. at 0:38, at the middle of the cartridge you can see that there is a tiny hole like thing. take a syringe, poke it in there and fill the ink. after filling just put the canon sticker back on. no need to put a plug!
rahul0272 6 months ago
why do you want to remove the sticker in the first step???
jbragadeesh 6 months ago
印出來有斷線的現象
是填充的過程中哪邊有問題?
garys1255232 6 months ago
where can i buy this kind of ink bottle???
uNi1710 8 months ago
This has been flagged as spam show
product: inkist,, automatic refill is good.
visit inkist dot com
no niddle, no power, no syringe,
even kid can refill
inkistpark 9 months ago
why at screen say still
ink empty?
ahpong1 10 months ago
@ahpong1 coz the cartidge contains a chip that records the ink level. once the ink becomes empty...there is no way to reset the cartidge
Dibyasmail 8 months ago
@Dibyasmail if the screen says it is empty, can you still print or not?
3173jason 6 months ago
@Dibyasmail y not then fill up the cartridge when it says "low ink" to avoid having the empty cartridge screen?
iGoTUrBaByMaMa 4 months ago
This has been flagged as spam show
@Dibyasmail If you encounter error after refilling the cartridge. All you have to do is this.
For MP Series Printers: Press and hold the STOP/RESET button down for 5-8 seconds, it will allow you to override the counter. The cartridge will print , however, the ink level display may not show.
khushrajsingh 1 month ago
Is this bubblejet technology?
realsoccerdude123 11 months ago
hey !
yarika0325 11 months ago