Homemade RC gas boat first test

[AFullSodaCan]

After trying to drive a truck across the pool and failing miserably, he finally made a boat

[nikos839]

this is must be very heavy!!

[saabkyle04megafan]

xD 26cc engine ?

[XboxGamerKidd]

IN THE POOL.... BAD IDEA

[ddemko100]

that engine sounds awesome!

[isaacupdikesauce]

what is the distance in between the bottom of the catamarans and the bottom of the body.

[Summerride]

@isaacupdikesauce It's 1.5" but I would not recommend to make this kind of hull , testing was not a succes.

[TheTANMAN318]

Bigger prop is all it needs

[RFTAEC100]

That small prop wont do much... Nice boat though :P

[rockman12367]

that is a cool boat!

[rrdenas]

you need a bigger prop

[lenno96]

where did you get the screw

[NZXTInerTia]

Heck with that engine and a big enough tiller that thing should fly!

[trythisthingagain]

Ive never built an RC boat so DONT HAVE A LOTTA ROOM TO TALK, but isnt that prop a little small for that motor and boat? or does it have enough bit?

[TheNineveh]

Thats got more power than my 2hp outboard, by the sounds of it.

[FearChaffe]

U need a bigger propellor!!!!

[joerirockcrawler]

Great vid! Subbed! Sub back? =D!

[KJP71]

how are the bearings in axle, are there extra bearing unit, or are there any other than whats inside the motor? I could well imagine assembling something like that to my 10 pound wooden tree trunk rc boat he!

[tupfent]

fail..



[lazybonesmalone3989]

that boat is beatiful! coughf,ugly

[aForkandaSpoon]

I wan't to make a boat and I am thinking get a big foam block, carve it, and then coat it with a layer of fiberglass and epoxy.

[n1f1sniper]

sounds really awsome

[qtotgirl]

this boat is great, I appreciate the effort that went into building it. when you scratch build every part start to finish it is quite a feat. I had a boat that I scratch built with a 21cc michulach motor that if I got paid for my time I would have made $1 per hour. I even made the u-joints on the drive shaft.

[20057468]

man think about polution in the rating i give you a -9000

and yes i just gave you a -9000 thats all you deser :-}

[ultaMMA]

wow good jop the acceleration seems like it will be choppy but still sick

[Bluey2708]

Can u send me your plans how u built the boat please and the measurements thanks

[colethelegodude]

man, thats a B-E-A-S-T BEAST! awesome i got a nitro rc car

[pumpactionmedia]

The prop is way too small. It couldn't stir my grandmother from her grave. A bigger prop and a gearbox, and you have your self a race!! :)

[doty4454]

you should try rc fishing with that engine!

[xDjAsOnF]

lol you got a lawnmower engine in it

[arsenalprasa]

how much does the hull weight

[trizzo5]

hi

nice

how did you get the shaft through the hull

Thanks

[TheJurky]

how did you mount the engine?????

[DSi64man]

lol you left a scredriver in there

[MegaRallycar]

Ya that's not gonna go anywhere far or fast

[kno3nitro5cole]

could u make it any more aero dynamic it looks like a box but on the positive it looks like it was constructed sturdy and sounds great

[coolpersonize]

was it hard to build

[holeshotholm417]

sweet what kind of motor?

[screamingmimi456]

nice

[kevinyo12]

that is an extremely small propeller for that big ass motor haha

[MissLaurenLenee]

can i see more of this boat i would like to build one can i see the bottom

[TheSensfan11]

i luv how there is a random screwdriver in the boat

[MrFatducks]

wait how do you steer it ? do you have a servo?

[REALDualDesertEagle]

Chainsaw engine?

[snowmobilinglegend]

how much did it cost to make

[avgrech]

i belive that`s over kill man that engine is way too big for the boat and propeller you will end up dameging the engine and boat

[Brickguys3456]

i would have put a bigger propeler thing that is on the back

[xxBUBBABOY333xx]

i would have liked to see you throttle it, maybe next video

[BioHazrd07]

I lol at your 2d like construction

[949dk]

more vids of this

[madde78273]

thats kind of a small prop for a beasty engine like that

[jackbomberdp]

how did you construct the hull? do you have to cover it with fiberglass?

[Summerride]

It is made from 1/4" plywood then painted with 3 coats of Epoxy paint.

[jackbomberdp]

@Summerride that's awesome info- I've been looking for a decent replacement for fiberglassing. thanks! your boat's pimp.

[peterm8133]

if you run this boat in a loch or sea get a bigger prop these engines can turn a 78mm 3 blade which will make it a lot faster

[staffmen0207]

can you please tell me What are the dimensions of the ship.

[Summerride]

It's 55" long , 18" wide , 7" high

[staffmen0207]

@Summerride tnx. and how much is he weight

[CowsXonXcrack]

Propellor is too small, get one about 1 1/2 to twice as big as that one.

[MrThemEe]

@CowsXonXcrack No! Really?...

[CowsXonXcrack]

@MrThemEe Don't be a cocky bastard you sadistic fuck.

[MrThemEe]

@CowsXonXcrack Jeez....

[w0lsky]

Where did you bought the propeller?

[myproject2010]

What is the size in millimeters of the prop you use in the test water???. In my channel I have proof of my 1.55meters boat with 21.2cc engine. What would the best propeller????

[YaMaHaCrAzY68]

how tall is it?? Where the motor is

[koglowa]

yea man....that prop should be like 5x bigger

[YaMaHaCrAzY68]

Hey did you buy that pipe or make it? Cause I really want one! And if you did make it can you post a vid of how you did it or just comment me back! Thanks I subscribe im lovin this boat!

[whitenoise201]

leave the tools inside incase it breaks down in the middle of the lake??

[Jackko1223]

what did you use for the body ?

[xjoeman123]

this allmost looks like the one i built. look at my vids

[CertifyThis]

agree with the big prop idea but gerat thinking, i like the boat, just increase prop size and lets ee this bad boy go.

[dilfy2007]

how to u get the ruder to move

[koglowa]

@dilfy2007 servos for the rudder, it's a 20 something cc fron a trimmer with a built in clutch...

[dilfy2007]

how do u make the ruder move wot type of engine

[merked410]

it needs a bigger prop n a paint job

[MrThemEe]

No?! Really?

[merked410]

watever

[platinum1234567890]

The prop looks small lol

[MilosSub]

the egnine is from a chainsaw??It looks like it...

[Summerride]

Weedwacker !

[MrFatducks]

u should get a big prop

[markosk100]

and have you thought will you give me a draft?

[foxysquerl]

thats awesome weed e

ater engine should make it fly nice job:)

[markosk100]

very very nice,

if you would like and give me the draft of this ship

[Summerride]

Thank's !

I would not recommend you to build a hull like this one. Test test I've done was not very good on water. Too much water displacement so find a V-Hull shape I would say.

[bargolan8]

what kind of wood did you use?

[Summerride]

1/4" standard plywood , finished on one side.

[elninonitro]

that prop is TINY! For an engine like that, you'd be looking at a Prather 275 'ish prop

[b1heqh54]

Missespresso seems like a very sincere person. You're lucky to know her.

[missespresso]

thank you, but it is me who in the chance to know it ;-)

[Acube24]

Very nice sound ! Can t wait Friend, I will be there ! ;)

[Skydive4ever]

Hehe, can't wait to see it :-)

[missespresso]

I am really impressed to see that you are able of constructing a boat. I find that you have a nice passion for what you undertake