good to know, I always wondered how r they built standing like that and every now and then when a building gets taller how do they cope in to be higher, btw; r all cranes built with the same method? as this one seems a bit different from the ones i c in my country, this 1 seems a bit advanced....
@MatheusMK3 as you can see in the video it was a regular sized crane attached to a truck. this can be built like any other vehicle. I'm going to assume that sarcasm though. but y'know... just in case it wasn't...
hope this is not a San Marco training video. Because there will be a lot of crane rigger will die from climbing the tower. once you climb the tower, the balancing counter weight CAN NOT be unloaded before the tower is insert into the jacking cage. The new tower should be hanged on the mono rail before climbing and balancing. well other then that, this video is very well done.
4:09 - awesome, I never seen it but I seen truck cranes assembled a tower crane in my real life because I ride the bus for went to home from school in afternoon back in 2002.
great video explanation, as many i never knew how these cranes are built. All the time i had this question in my mind, finally got the answer. Thanks for sharing... great work!
ok now we all know how tall buildings are built, but what about skyscrapers like 600 or 800m tall? i know they build additional constructions on which they put the cranes, but there is no video how they do it and more interesting - how they dismantle the cranes at the top.
Mystery Solved. I too have been staring at a highrise project consisting of 7 buildings go up and have been wondering the exact same thing. Thanks for posting this.
This is a great video but it left me with two questions:
1. How does the 'lifter' connect to the main tower (what causes it to stop sliding ~2:20)?
2. You explain that the crane uses the concrete block at 4:05 etc to balance itself. Why doesn't the crane topple when it puts the block down/ (wouldn't the moment force suddenly go to 0)?
Thanks, this answers one of my childhood questions, but arouses another. How do the climber push the top part of the crane up to allow the next section to be slid in? Does it have a built in engine?
Well done, I've done a lot of work around cranes over the years, so I knew how this was done. But, was still very cool. Too bad they don't make a video game about this kind of stuff. Thanks for the video.
im 33 years and always been wondering how the hell do they put up a crane. one day it's there and the next day its been dismantle and gone. Great tutorial!
PLEASE DONT READ THIS. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT something bad will happen. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY CAUSE IT ACTUALLY WORKS THIS ACTUALLY WORKS
Wat a g8t video really helped explain to Jordy and the lads in CD2 how this is done. And wat a tune DJ Casey really should do a remix !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I've wondered how the hell they're errected ever since I was a kid, and thought my dad tried to explain it, I still couldn't wrap my head around it... this was great, thanks for it
Great video. But just one thing. When climbing one does not pick up a concrete weight, climb, put the weight down and pick up the tower to be installed. The crane instead first picks up the tower, sets it on the shelf in front of the future opening. Then they pick up a second section to balance the whole operation. Once balanced. The climb begins creating an opening in front of the tower on the shelf which is then slipped into position and connected.
awesome, i had no idea how those towering cranes ever got that high, now i really want to be a contractor/architect so i can actually see these things in action
please tell me how much a tower crane costs???? (new & Used)..... and sometimes i've seen that the tower crane is fitted inside the building i.e in the portion of LIFT.....so how they fit the crane there???
crane rental varies on conditions and duration. 35-50 K a month normally, The Casino Job I work on has 6 like this one. building is built around 3, outer crane dismantles inner working towards perimeter and an assist crane booms over and pulls load (sections) out from top.
I've always wondered how one is put up, I always look up at these cranes at a skyscraper's construction site and sometimes can be awe inspiring at times.
as a tower crane tech and a 3d modeler, I can say: Very Nicely Done!!! some greate detailing on the models, and the sequence captured it all. Showing the building going up is a great touch. I usually see a tower section used as the balance weight during climbing though...
now thats a vid ive seen cranes be built up and taken down and thats good how to demonstrate how one is built thanks for the post my mate whos a primary teacher uses this to show how a crane works thanks for this
Thank you so much man .. i swear that was so nice
shash32489 2 weeks ago
It's not rocket science but I wasn't able to figure out the assembly process. It builds up itself. Great idea.
afakethrum 2 weeks ago
good to know, I always wondered how r they built standing like that and every now and then when a building gets taller how do they cope in to be higher, btw; r all cranes built with the same method? as this one seems a bit different from the ones i c in my country, this 1 seems a bit advanced....
silenceSHHH 3 weeks ago
most annoying music ever
sunnymiu 3 weeks ago
رائع جدا
شكرا
thank you
alwhash 3 weeks ago
Oh wow, really? Now that question's answered.
TheNostalgiaJunkie 1 month ago
This has been flagged as spam show
Alliance SEAA POY Entry HDV
With two inch clearances massive bridge is lifted
youtube.com/watch?v=s4fDDzrRL0w
RDIGlobal 1 month ago
i like the perfection in this video....
rahulketanshah 1 month ago
imgur brought me here.
datlilboifrank1 1 month ago
I have always wondered how they were built... not i know... thanks!
phox1515 1 month ago
I'm gonna buy ten!
hvorego 2 months ago
Thanks very useful instead of hearing it in class im in clas btw
BADboy7ix 2 months ago
Hey! What's the name of that song??
phvaguiar 2 months ago
thx
LuddeTheKudde 2 months ago
WHY THIS FUCKING MUSIC AGAIN?!!?!?!?!1/!/
envycomplex 2 months ago
Great video, but I have a question: If a crane is built using another crane, who built the first crane?
MatheusMK3 2 months ago
@MatheusMK3 as you can see in the video it was a regular sized crane attached to a truck. this can be built like any other vehicle. I'm going to assume that sarcasm though. but y'know... just in case it wasn't...
phox1515 1 month ago
@phox1515 Yes, it was somewhat some sarcasm since there was a crane building another crane...
Btw, your comment was also sent via Twitter... lol
MatheusMK3 1 month ago
Amazing!
KingArcher8x 2 months ago
hope this is not a San Marco training video. Because there will be a lot of crane rigger will die from climbing the tower. once you climb the tower, the balancing counter weight CAN NOT be unloaded before the tower is insert into the jacking cage. The new tower should be hanged on the mono rail before climbing and balancing. well other then that, this video is very well done.
TheLeGends2006 2 months ago
now i know, thanks, this video is perfect.
meadowsirl 2 months ago
very well done bro! ur amazing..
juyan2122 2 months ago
Very good video. It answers my curious how to to make the tower crane so high
erekit 2 months ago
Very good vid 10/10 thanks
SuperSuperGanjaman 4 months ago
Finally. I now know how the cranes go up. Thank you for the information
manazma 4 months ago
well done
d9andy992 4 months ago
13 people still use bamboo scaffolding
187prettyboy 4 months ago 15
wow !! this video is incredible n well designed !!
ChIkIdRaKulllA 4 months ago
THIS VID IS REALLY GOOD....
adnarim2008 4 months ago
This video is excellent. Answered some of my questions. Is it canter-lever?
r7yrb7 4 months ago
To think it is all held through screws, nuts, bolts, and washers... O_O
ZaCaTeCaNiLLo1 5 months ago
1:20 is so cool
AkramUnited 5 months ago
COOL
riteshrated 6 months ago
4:09 - awesome, I never seen it but I seen truck cranes assembled a tower crane in my real life because I ride the bus for went to home from school in afternoon back in 2002.
vikingscool 6 months ago
impressive really :) thanks for the vid !
hollowkos 7 months ago
Nice one mate
funpas 7 months ago
L-profiles? I could NEVER trust a crane standing on L-profiles. That's why I love my WOLFF cranes
But interesting to see how other manufacturers are working.
AnimePhoenix888 7 months ago
Comment removed
AnimePhoenix888 7 months ago
isto ehh um grove...não eh??
jorgedpc 7 months ago
Thanks for the video, always wondered how these things go up.
Dee1067 8 months ago
Thanks for the video. That's one of the wonders of technologies.
10zico10 8 months ago
This is a great video but don't some cranes go up through the elevator shafts?
StevieRich 8 months ago 2
@StevieRich Yes, cranes can be built up in elevator shafts
glwiebe61 8 months ago
Nice. its the opposite if your dismanteling the crane?
callujah 8 months ago
Thumbs up if your here because of your curiosity about how to build tower cranes that build high-rise tower buildings.
kranial007 9 months ago
the song is groove cutter-my shooter
open490 9 months ago
great video explanation, as many i never knew how these cranes are built. All the time i had this question in my mind, finally got the answer. Thanks for sharing... great work!
faizalsamsu 9 months ago
What is the name from the music
Ladysman2171414 9 months ago
wie heißt das lied
Ladysman2171414 9 months ago
Always wanted to know how exactly that works. Thanks!
TigerXtrm 9 months ago
a magic tech.
roychengss 9 months ago
this was a badass video now I know very cool!!
hotdog2020 10 months ago
what is the name of the song
open490 10 months ago
Nice movie gratz to the creators of the movie and also to the inventors of this system.
Ratti666 10 months ago
ok now we all know how tall buildings are built, but what about skyscrapers like 600 or 800m tall? i know they build additional constructions on which they put the cranes, but there is no video how they do it and more interesting - how they dismantle the cranes at the top.
Neofit86 10 months ago
if you could show a person climbing up to the cabin at the end ,that would be great!
xiaoyang7 10 months ago
Kool, Now I know PS If ya don't like the music, I'm sorry you are too dumb to know where the off switch for your speakers is.
TheGramps1944 11 months ago
now how do they take it down
Yanda911 11 months ago
know I know how a crane is built :)
tamira750 11 months ago
That would take a crane to get it out.
SqueakyNeb 1 year ago
I was realy curious and wanted to see a video about this....but fuck this music is so gay!!!
abner252000 1 year ago
at 5:00 when the crane began building it's self i came with the force of a thousand suns
nofishhere4 1 year ago 15
high-tech-crane interesting..
MrJoerg1979 1 year ago
Yes, bring us more condos on the beach!
nuclearthreat545 1 year ago
This has been flagged as spam show
Chung toi can tim va mo rong dai ly phan phoi thiet bi nang palang so 1 Han quoc - since 1965(lau doi nhat Han Quoc) tai Viet Nam.
wwwcautruchanquoc,com
thietbihanquoc 1 year ago
Well that has answered my question that has been pondering in my mind for a while. Thanks
cryingshame1989 1 year ago
This has been flagged as spam show
Date a naughty woman online benaughtyman.info
gfjgfjhhjfgurte 1 year ago
great video before seeing that video i had my own thoughts and very confused how crane lifts up... thnx
thelocked16 1 year ago
how long does this take?
nyk10000 1 year ago
anyone who works with crane drivers or riggers are fucking poofters. bunch of fucking cocksuckers all of u
buttsecksist 1 year ago
@buttsecksist
Got knocked back for a job?
MegaOld44 1 year ago
@MegaOld44 no got fired
buttsecksist 1 year ago
I know it's been said before but great video, definitely answers my questions!! Not sure about the music though!!! Lol
myusernameisheavy 1 year ago
Mystery Solved. I too have been staring at a highrise project consisting of 7 buildings go up and have been wondering the exact same thing. Thanks for posting this.
mtidona 1 year ago
Strangest crane building music ever.
shroobie 1 year ago
it builts itself! :)
its quite suprising that the base is actually pretty small in diameter
onraj9mm 1 year ago
This has been flagged as spam show
wonderful video presentation .i used to wonder how the cranes height grows day by day along with the size of structure
vinodbme 1 year ago
This has been flagged as spam show
wonderful video presentation .i used to wonder how the cranes height grows day by day along with the size of structure
vinodbme 1 year ago
wonderful video presentation .i used to wonder how the cranes height grows day by day along with the size of structure
vinodbme 1 year ago
great..you've just answered one of my oldest questions in my life.. :p
does the climber have a built in engine ?
7amanyation 1 year ago
This is a great video but it left me with two questions:
1. How does the 'lifter' connect to the main tower (what causes it to stop sliding ~2:20)?
2. You explain that the crane uses the concrete block at 4:05 etc to balance itself. Why doesn't the crane topple when it puts the block down/ (wouldn't the moment force suddenly go to 0)?
Thanks!
yurtyurt56 1 year ago
nice song what is the name of the song
open490 1 year ago
מדהים!!!!!!
animallog 1 year ago
great video thank you
johnnycat500 1 year ago
So that's how they do it.
mrartvandelay3000 1 year ago
human ingenuity
bbsonjohn 1 year ago
This has been flagged as spam show
I've always wondered....great vid!
droobie99 1 year ago
i've always wondered...great vid!
droobie99 1 year ago
Thanks, this answers one of my childhood questions, but arouses another. How do the climber push the top part of the crane up to allow the next section to be slid in? Does it have a built in engine?
cartilige 1 year ago
Wow nice Information
acecranes 1 year ago
acecrane.com Wow nice Information
acecranes 1 year ago
gracias por el aporte !!!
ERENATO1 1 year ago
very nice
CraneConsultant 1 year ago
holy sh*t it assembles itself! how brilliant is this! does every (higher) tower crane work like that?
Zoebby 1 year ago
That is complicated!
productiveamerican 1 year ago
Well done, I've done a lot of work around cranes over the years, so I knew how this was done. But, was still very cool. Too bad they don't make a video game about this kind of stuff. Thanks for the video.
chazdad 1 year ago
Awesome
organicshopping 1 year ago
ok that is awesome...
clownie126 1 year ago
tower cranes !!
CraneConsultant 1 year ago
always wondered how they extend it further thx nice demo
tanoospro 1 year ago
does the problem happen when the crane is too high and all the weight bends and crushes the metal right at the bottom?
skillfulazn999 1 year ago
AWESOME!!! Ive been thinking about this for awhile
skillfulazn999 1 year ago 2
im 33 years and always been wondering how the hell do they put up a crane. one day it's there and the next day its been dismantle and gone. Great tutorial!
taureador 1 year ago 2
AWESOME!!!!!!!
anmlthng 1 year ago
This has been flagged as spam show
PLEASE DONT READ THIS. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT something bad will happen. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY CAUSE IT ACTUALLY WORKS THIS ACTUALLY WORKS
gavdowns 1 year ago
This question has been making me loose sleep for years! Finally I understand, thank you!
rowanofrin1 1 year ago
This is awesome. I always wonder how the nTowers crane is working!!
dodo309 1 year ago
Perfect
berong92tm 1 year ago
Wat a g8t video really helped to explain it to Jordan and the lads of CD2 SRC. really think DJ Casey should do a remix
HenrySRC1 1 year ago
Wat a g8t video really helped explain to Jordy and the lads in CD2 how this is done. And wat a tune DJ Casey really should do a remix !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
HenrySRC1 1 year ago
I've wondered how the hell they're errected ever since I was a kid, and thought my dad tried to explain it, I still couldn't wrap my head around it... this was great, thanks for it
violentsa 1 year ago 2
fucking brilliant 3d explanation. wow! well done.
r32adt3db 1 year ago
very nice tutorial
junkai21 1 year ago
It really is a marvel how construction works.
iFlyHlGH 1 year ago 2
Great VIdeo
craneblogger 1 year ago
aaaa so thats how they do that, I thought it just teleported there S:
Vadix3 1 year ago 2
Great vid, thanks!
notslo 1 year ago 4
That was really good to watch! I've always wondered how tower cranes are erected and now I know! Thank you x
honeycatkins 1 year ago 14
greattt
qalpos 1 year ago 3
Really fantastic, both the animation and the crane design.
chongsfamily 1 year ago 3
Amazing!! Thanks for the VID!!
o0payaso0o 1 year ago 3
whats the name of the song ?
ozikool 2 years ago 2
@ozikool My Shooter....
spyglass123 1 year ago 2
Too late
ozikool 1 year ago 2
omg wow
salil2192 2 years ago
Great video. But just one thing. When climbing one does not pick up a concrete weight, climb, put the weight down and pick up the tower to be installed. The crane instead first picks up the tower, sets it on the shelf in front of the future opening. Then they pick up a second section to balance the whole operation. Once balanced. The climb begins creating an opening in front of the tower on the shelf which is then slipped into position and connected.
andrewarnoldin 2 years ago 7
oh thats how its done!
great video man, thanks
baytare 2 years ago 4
i'm very glad my animation has been appreciated so much :)
LoStDimenSionS 2 years ago 4
awesome!!!
lolothe2nd 2 years ago 4
Brilliant piece of work!! Same here, this answers a question that's been haunting me and my dad for a long time. Thanks for sharing this!
Necarungcong 2 years ago 3
This video just answered all the questions I've been having for a long time.
neostack 2 years ago 3
Tanx alot dude this video helped me figure out EVERYTHING!!! COOL VIDEO BY THE WAY!!!
Trinitaste 2 years ago 2
awesome, i had no idea how those towering cranes ever got that high, now i really want to be a contractor/architect so i can actually see these things in action
makuta204 2 years ago 2
Very informative video. Thank you.
RebornAc3 2 years ago 4
I've been staring at a construction site for a month trying to figure this out. Brilliant video!
Paradiddler45 2 years ago 27
If a crane doesn't have a climber it can only go as high as the truck can lift.
glwiebe61 2 years ago 12
@Paradiddler45 Me too. Thanks to glwiebe61 :D
ularpadat 1 year ago
Thanks so much for the thing I wanna know for a long time.
kchavalit 2 years ago 3
So Cool, Thanks
kittscake 2 years ago 2
AWESOME!
izak1992 2 years ago 2
This video clearly answers my childhood question.
tunyawat 2 years ago 63
@tunyawat what is that question:)
ps0114 1 year ago
Know i know how to assemble a huge tall crane without the support of truck crane
jeng2619 2 years ago 6
hi
please tell me how much a tower crane costs???? (new & Used)..... and sometimes i've seen that the tower crane is fitted inside the building i.e in the portion of LIFT.....so how they fit the crane there???
BeautywithLove 2 years ago 4
"and sometimes i've seen that the tower crane is fitted inside the building i.e in the portion of LIFT.....so how they fit the crane there???
They use the help of the first crane they assembled to build the building then with that they build another one.
RebornAc3 2 years ago
crane rental varies on conditions and duration. 35-50 K a month normally, The Casino Job I work on has 6 like this one. building is built around 3, outer crane dismantles inner working towards perimeter and an assist crane booms over and pulls load (sections) out from top.
edawson29 2 years ago
wow. very well done. Always how these things assemble themselves. I had an idea but couldn't completely visualize it.
BradyLile 2 years ago 4
thanks you for this video, i now understand how it works. great!
27nhoj 2 years ago 2
WOW! amazing video
liranp4 2 years ago 5
hi! thanks for putting this up. What is the music? I'd really want to know.
ocurro 2 years ago
@numbakrunch
Did you use Shazam? With the world it is today, you don't have to use your brain's RAM cache for retention of trivial knowledge.
Regardless, the song is amazing, as is the design and CAD work.
~Spabba
spabbarter 2 years ago 2
very very cool (though scary) !!
SkySoul21 2 years ago 3
How high does a crane have to be before it builds itself - I ask because I always look out for the climber part and never see it!
ollyk22 2 years ago 2
well done
nimo888 2 years ago 3
The song is an excerpt of 'My Shooter' by Groove Cutter
numbakrunch 2 years ago 2
Incredible! I love videos like this, thank you.
maficmelody 2 years ago 8
what purpose does carrying the block in 04:05 achieve?
NightShadow03 2 years ago 12
It balances the crane as it moves up
glwiebe61 2 years ago 8
Was just wondering the same thing...
koffiezet 2 years ago 3
I never thought I'd be literally amazed at a video of a crane being put together. WOW!
aaronsdropzone 2 years ago 6
Amazing video!
ColourNapkin 2 years ago 4
I've always wondered how one is put up, I always look up at these cranes at a skyscraper's construction site and sometimes can be awe inspiring at times.
xaviervmewtwo 2 years ago 3
I've always wondered how these cranes get built up. If you play the video backwards, I would expect that it is approximately how one is taken down.
xaviervmewtwo 2 years ago 3
anyone know the song?
maxdarch 2 years ago 4
Excellent video. Thanks for posting.
feedmepaper 2 years ago 3
What's the song to this?
chbrules 2 years ago 4
That was awesome
Jaculum 2 years ago 3
I'm sorry to be that guy - but what is this song called?
CaptainClass 2 years ago 4
It's some mix of Groove Cutter - My Shooter.
joyinjection 2 years ago
...forgot to ask... what software packages did you use for the production? did you create the models?
therichimoto 2 years ago 3
as a tower crane tech and a 3d modeler, I can say: Very Nicely Done!!! some greate detailing on the models, and the sequence captured it all. Showing the building going up is a great touch. I usually see a tower section used as the balance weight during climbing though...
therichimoto 2 years ago
show....post me please. (brasil)
bueninhos 2 years ago 3
Whoa....the crane is building itself!!!!!
varts91 2 years ago 3
now thats a vid ive seen cranes be built up and taken down and thats good how to demonstrate how one is built thanks for the post my mate whos a primary teacher uses this to show how a crane works thanks for this
disconic 2 years ago 7
how you get ths program?
k3nn96 3 years ago
It's not a "program" it's a 3D animation. It could be created with a wide variety of 3D animation software.
antiaverage1 2 years ago
Thank you for posting, it is really informimg
0shab0 3 years ago 4
Great video!
nitroboie 3 years ago 3