@nnnegrooo : the intake temp was running high for a while before I did the vacume line bypass mod. It is stock internals, I have changed the pistons once and opend up the ring gap to max specs.
Unfortunatly the nitrous oxide broke the piostons again, but was making 411LbFt of torque and 368hp at the wheels.
@stormracer05 r u serious ?? so tht would fit in a 2002 mustang v6 right/ even is from a cobra i didnt know tht a frined of mine wanna do tht but wasnt sure if it would fit please tell me so i can help my frind ..thanks.
@sermusgt97 Yes it fits on a 3.8L v6, I think there is a manifold out there that you can purchase for this swap. This is a custom made top plate that bolts on to the OE lower intake.
@dbuc100985 And so does MySteed Performance for 830 including shipping..Besides it being the lowest sitting/priced on the market Matt(the original creator) Made the one for SSM and then revised it for MySteed.
@sermusgt97 Look for Mysteed Performance(Sells a Kit) or Super Six Motorsports(Sells a Plate and is the Best place for H/C and internals)Super Six uses the first version of the one MySteed carries which is currently the lowest sitting.
Would this fit my 3.8 v6 1996 mustang? If not what would b the best supercharger i could get?
urdaddybitch100 4 months ago
@urdaddybitch100 It fits a SPI 3.8L, the m90 or m112 can be used but heat is the biggest hurdle for either of them.
stormracer05 4 months ago
Inspiring.
123jozef 10 months ago
kool supercharger, is this a bolt on kit or just custom ... got a 95 pony n not sure if swaping out the engine is the best way to go...
234yomo 1 year ago
@234yomo It is a custom upper intake, there is one that is a cast unit and very similar Just supply a supercharger off a cobra
stormracer05 1 year ago
@stormracer05 so youre saying a cobra supercharger will fit a v6 mustang?
99ManMustang 10 months ago
@99ManMustang Yes it does.
stormracer05 9 months ago
did you have to change the internals and how is it with temp does it heat up?
nnnegrooo 1 year ago
@nnnegrooo : the intake temp was running high for a while before I did the vacume line bypass mod. It is stock internals, I have changed the pistons once and opend up the ring gap to max specs.
Unfortunatly the nitrous oxide broke the piostons again, but was making 411LbFt of torque and 368hp at the wheels.
stormracer05 1 year ago
Gotta say nice job. One thing though. From the way it looks you will have to unhook your radiator hose to change the belt.
AlienInferno 2 years ago
It has been rerouted with a pulley off the upper altinator bolt.
stormracer05 2 years ago
@stormracer05 r u serious ?? so tht would fit in a 2002 mustang v6 right/ even is from a cobra i didnt know tht a frined of mine wanna do tht but wasnt sure if it would fit please tell me so i can help my frind ..thanks.
sermusgt97 1 year ago
@sermusgt97 Yes it fits on a 3.8L v6, I think there is a manifold out there that you can purchase for this swap. This is a custom made top plate that bolts on to the OE lower intake.
stormracer05 1 year ago
Super Six Motorsports makes an adapter for $900.
dbuc100985 1 year ago
@dbuc100985 And so does MySteed Performance for 830 including shipping..Besides it being the lowest sitting/priced on the market Matt(the original creator) Made the one for SSM and then revised it for MySteed.
TheMrhoneycutt 1 year ago
@sermusgt97 Look for Mysteed Performance(Sells a Kit) or Super Six Motorsports(Sells a Plate and is the Best place for H/C and internals)Super Six uses the first version of the one MySteed carries which is currently the lowest sitting.
TheMrhoneycutt 1 year ago
It is an Eton M112 off the Cobra mustang.
stormracer05 2 years ago
hey i was just woundering what kind of supercharger that was? because im trying to do the same thing to my v6 mustang
firebrdkid 2 years ago