hey man...im not sure if u still check these or not..but ur vids have helped me a lot so far...only question i have...at 0:23 you show your leaf spring bracket...what did you do with the cone shaped little thing holding the leaf spring??
It looks great but in your video you get cut off when you were about to say you how low your truck went down or inches. Can you tell me who low you got it after drilling the hole higher? thanks
Why would you lower this it is fine just the way it is. I have driven five of these trucks and never even thought about lowering them, then I bought a B2200...
i started watching all your videos on your nissan hardbody and man your doing a good job i think im going to do a few of these things on my 84 nissan datsun pickup its alredy lowered 3 inches but i want it lower tho keep up the good work man really helps out!!!
cool video! just one question is the differential on these trucks sitting on the top of the leafs springs or is on the bottom? reason is cuz i was wondering if S10 lowering blocks would work to lowers a Nissan, i wan to buy a hardbody and slam it like yours but just thought if i can make those blocks work it would be easier.
@Nissanman1992 its really easy to lower the front of it.. I'll see if I can post a video up as soon ass I can man.. just message me and I'll tell the video nam!!:)
@iwnt2beb0rnagaiN2010 on the front suspention there ae torsion that connect to the lower control arm find where the opposite side is to those bars. there is a bolt with two nuts. jack the truck up and loosen these equaly on both sides about 15 full turns at a time till desiered ride hight. hope this helps you.
I need help on lowering my 92 Nissan in the front i did the back but i need help in the front i don't know if somebody has a video out there on how to lower the front. can somebody help me out and make a video i heard its not that hard but i don't know.
@baggtahoe808 I've got a couple of things done but very minor with the holidays going on my time is filled with family for the moment I may put a video together befor christmas fingers crossed. But thank you for asking :)
Sweet truck dude. I just bought my second hardbody. I'm currently rebuilding the body then next step it letting it get a closet relationship with the asphault lol. I am getting 4 inch blocks for the rear but not sure what to do about the front. Any suggestions?
@LOWnSLOW18 Awesome this is my first hardbody so I'm just taking it one step at a time I'm gonna bring the front back up about 3 inches and then look for some short shocks for now I looking up at the different forums to get knolege of what I can and can't do. I wish I could help u more.
@donkblackfist Thank you for the support but right now I'm having second thoughts about 20"s everyone has them how many just keep 14"s on there truck :)
@blackwagon18 I don't have the B2200 anymore sorry. And I am gonna get drop spindles as soon as I can I gotta get threw these holidays first or win the lotto lol.
@91grnbronco You can do the somethings I'm doing to mine a Mazda will also sit lower in the rear easier removing middle leaf and using 3" blocks u would need to notch the frame lol.
my god! damn thats low in the frount, comeing from a man who thinks sitting in the ground is a good hight, that allmost looks to low. is that going to clear driveways? looks on the video thats its about maby 2, 2 1/2 inches of the ground.
@TJJIM Lol yeah it's about 2 1/2" like u said and I've already driven it into town and did pretty good. Only thing was when I bounced the driver steer rubbed a little. Lol
hey man...im not sure if u still check these or not..but ur vids have helped me a lot so far...only question i have...at 0:23 you show your leaf spring bracket...what did you do with the cone shaped little thing holding the leaf spring??
markdrummer225 1 day ago
It looks great but in your video you get cut off when you were about to say you how low your truck went down or inches. Can you tell me who low you got it after drilling the hole higher? thanks
1714td 2 weeks ago
bra your a killa! most you vids helped
ive been searching ffor somebody as acutate as u
thanx bro
jawskateforeal 1 month ago
@JD97897 if you look closely its just a plastic cover not the rims lol
Elifeo13 1 month ago
where did you get the 5 lug conversion?
JD97897 1 month ago
Why would you lower this it is fine just the way it is. I have driven five of these trucks and never even thought about lowering them, then I bought a B2200...
BainLuke 1 month ago
trailer park
kc88kc 1 month ago
stop spending money on your truck and spend it on your little girl. all of it.
greenrolaids 2 months ago
i started watching all your videos on your nissan hardbody and man your doing a good job i think im going to do a few of these things on my 84 nissan datsun pickup its alredy lowered 3 inches but i want it lower tho keep up the good work man really helps out!!!
supersergio1123 2 months ago
Thanks for the video... Nice job... Lots of help...
kr9002 2 months ago
nice truck!
LordRhyme 2 months ago
i hear the locust's xD
420in757 3 months ago
cool video! just one question is the differential on these trucks sitting on the top of the leafs springs or is on the bottom? reason is cuz i was wondering if S10 lowering blocks would work to lowers a Nissan, i wan to buy a hardbody and slam it like yours but just thought if i can make those blocks work it would be easier.
MrLIFEISTOOSHORT 3 months ago
check out my hardbody i got it dropped on 22s with 2 18s walled off
CarCustomsEnt 5 months ago
NO SHOCKS = NO BRAINS
tac2791 6 months ago
what did you use to make the new hole in the leaf spring hanger? ill need to get some tools for that.. it would help to know some specifics.
goddamnitantonio 6 months ago
awesome...
48perkins 6 months ago
you took the shock out so you dont have suspension in the front?
BurntToast11111 7 months ago
where did you buy the headlight conversion?
telorvehc0chevrolet 8 months ago
@telorvehc0chevrolet On eBay just enter your headlight part number in the search hope this helps u
earthscraper69 8 months ago
@Nissanman1992 its really easy to lower the front of it.. I'll see if I can post a video up as soon ass I can man.. just message me and I'll tell the video nam!!:)
15josemena 11 months ago
This has been flagged as spam show
how did you lower the front pleeeeeeeasee let me know.....
iwnt2beb0rnagaiN2010 1 year ago
how did you lower the front pleeeeeeesee let me know.....
iwnt2beb0rnagaiN2010 1 year ago
@iwnt2beb0rnagaiN2010 on the front suspention there ae torsion that connect to the lower control arm find where the opposite side is to those bars. there is a bolt with two nuts. jack the truck up and loosen these equaly on both sides about 15 full turns at a time till desiered ride hight. hope this helps you.
earthscraper69 1 year ago
I need help on lowering my 92 Nissan in the front i did the back but i need help in the front i don't know if somebody has a video out there on how to lower the front. can somebody help me out and make a video i heard its not that hard but i don't know.
nissanman1992 1 year ago
@nissanman1992 Check my newest video it explains all u need to know about lowering the front.
earthscraper69 11 months ago
@nissanman1992 check my page out
CarCustomsEnt 5 months ago
any updates man :)
baggtahoe808 1 year ago
@baggtahoe808 I've got a couple of things done but very minor with the holidays going on my time is filled with family for the moment I may put a video together befor christmas fingers crossed. But thank you for asking :)
earthscraper69 1 year ago
Sweet truck dude. I just bought my second hardbody. I'm currently rebuilding the body then next step it letting it get a closet relationship with the asphault lol. I am getting 4 inch blocks for the rear but not sure what to do about the front. Any suggestions?
LOWnSLOW18 1 year ago
@LOWnSLOW18 Awesome this is my first hardbody so I'm just taking it one step at a time I'm gonna bring the front back up about 3 inches and then look for some short shocks for now I looking up at the different forums to get knolege of what I can and can't do. I wish I could help u more.
earthscraper69 1 year ago
pull a leaf n notch it man...
baggtahoe808 1 year ago
@baggtahoe808 U was reading my mind lol that's the next step just trying to male up my mind on a few things.
earthscraper69 1 year ago
looks great keep up the good work bud
splaudio1 1 year ago
@splaudio1 Thank you for the support
earthscraper69 1 year ago
dude looks awesome I can't wait to see your 20's
donkblackfist 1 year ago
@donkblackfist Thank you for the support but right now I'm having second thoughts about 20"s everyone has them how many just keep 14"s on there truck :)
earthscraper69 1 year ago
@earthscraper69 this is wasthatawagon on cardomain,sell me the 20's for my Mazda B,and why dont you get drop spindles for it?
blackwagon18 1 year ago
@blackwagon18 I don't have the B2200 anymore sorry. And I am gonna get drop spindles as soon as I can I gotta get threw these holidays first or win the lotto lol.
earthscraper69 1 year ago
so sick i have a 88 mazda b2200 im do a rebuild right now and want it lower what can i do for the front i have 2 inch blocks in the back
91grnbronco 1 year ago
@91grnbronco You can do the somethings I'm doing to mine a Mazda will also sit lower in the rear easier removing middle leaf and using 3" blocks u would need to notch the frame lol.
earthscraper69 1 year ago
Comment removed
91grnbronco 1 year ago
my god! damn thats low in the frount, comeing from a man who thinks sitting in the ground is a good hight, that allmost looks to low. is that going to clear driveways? looks on the video thats its about maby 2, 2 1/2 inches of the ground.
TJJIM 1 year ago
@TJJIM Lol yeah it's about 2 1/2" like u said and I've already driven it into town and did pretty good. Only thing was when I bounced the driver steer rubbed a little. Lol
earthscraper69 1 year ago