I understand that man. But you have to keep in mind: most of the old garden tractors in the world, go to a scrap yard, and are crushed, torn apart and melted down. We're just giving them a second lease on life. one for fun.
It could be. Normally hydro's don't roll well unless they are moving themselves. Bolens I think use an axle pin to disconnect the one hub for rolling, then the spider gears just spin, in stead of turning the input shaft.
:) Nice man. The best place to find them is in peoples yards. Keep an eye out when you drive around. always look in peoples yards for a little bit of red in the shape of a tractor :) Could be a wheel horse. If not, it could be something else cool, and they might want to just get rid of it, or sell it cheap. :) Find alot of stuff by just asking people.
YO! :) i'll send you a video where i'm talking about how i made it fast. The cons were the way i had the belt running, it fell off the pulleys alot, and also the 5 hp engine i put on it, didn't deal well with the high speeds. Didn't have enough power.
Man, that thing is fast! That was funny seeing the tractor just go off on its own - you could do tractor bowling with some 55 gallon drums or something!
I have just as much country in me as in you guys,screw all of those queers that are making jokes and putting bad comments. By the way,where do you live man? I'm in Tennessee.
haha :) thanks man. we're up in eastern PA. where in tennessee? I was down in Kingsport a few times. there was alot of awesome tractors, trucks, and cars down there i wanted to get my hands on :) If only i had some money. You guys are lucky man, no inspection :) Theres alot of stuff i'd be driving on the road if it was like that here.
@tommartyn I'm in Gallatin,about 5 miles from the country side,but we live far enough into town that we can't shoot guns and have a good time,I still like to play around with mowers and go-carts though.
Yep, i always keep the governors on these engines, that way if a load gets put on the engine, it gives it extra throttle to keep the RPMS up where you have the throttle pulled to. i think i had it set up where the throttle had a stronger spring going to the governor though, so it was reving it a little higher then stock. The trans held up great. wheelhorse trans's are some tough bastards. as long as you don't grind them alot, they'll last forever. Not like peerless junk
evry wheel horse u hav my grandad has one of to idk if i could do that to his tho hahaha but it is nice to see a few still out ther movein under ther own power keep em man ther getin hard to find and is that a bigger motor or what did u do to get it to run that fast?
haha, yeah, your grandad probably wouldn't appreciate that.
there are tons of wheelhorses out there man. And i'm sure there always will be :) people love these machines.
A bigger engine won't make it go faster, you have to put a bigger pulley on the engine, or a smaller pulley on the trans, or both, to make it go faster. This came with an 8HP kohler, and it blew up, so the engine in the video is a 5HP honda, off of a pressure washer. :) Over Head Cam, that thing can rev high! :)
@68chev4x4 You switch the pullys around there is one on the trans mission and u buy a smaller pully for the transmission and put a bigger one on the motor i did it to my wheel horse but lost 3rd get Ha ha
@tommartyn o hell yeah i need the take the deck off and get about 5 more miles per hour. they made good tractors back then. for a stock mower like the case, it sure is fast.
I don't know if taking the deck off will give you more speed. Tractors normally top out due to gearing, and RPM limitations, not due to weight. This thing probably did 5.5MPH stock, and you could load on as much weight as you wanted, or take off as much as you wanted, and it would go the same speed.
Those case's are really awesome tractors man. What size kohler is in it? is it hydro or gear drive?
@tommartyn o hell yeah i need the take the deck off and get about 5 more miles per hour. they made good tractors back then. for a stock mower like the case, it sure is fast.
Duse that alsome. i have a friend who for the 4th of July put a moped engine in his 1960s wheel horse..... it does something like 30 miles an hour...... very scary
I think its a 868, or 858, or 878. one of them, not sure which. one of the 8's is for 8hp, and the other is for 1968, and not sure what the number in the middle is for. But this had the 3 speed trans with high and low.
I looked up what an A100 was, and they were made from 76 to 77, and had 10HP briggs on them. Other then that, and the hood looking a little different, they are pretty much the same machines i'd guess. if they are Horizontal shaft like these.
All wheelhorses have pretty much the same shape and all. BUT, if you really know wheel horses, this doesn't look like a raider 12. the grill is different, seats different, the entire frame, and hood are way shorter. stuff like that. though i think the trans might be the same. 3 speed, with high and low.
I do have a raider 10, which looks the same as a 12
b 4 i was born in 1994 my dad had a 64 wheel horse with a posey track rear end and it was identical to this one hahaha he said it was a fun fucker lol now i own a 67 cub cadet 123 and a 64, 71 1971 107 well 2 107s and a 63 100 and 2 1967 john deer 110
All horizontal shaft wheel horses look pretty similar from the mid 60's up until the 90's. with the same basic setup, frmae, and shape. and alot of the years used Kohlers. But yeah, i don't think the B80 model was around in 1968. And by the time of the B80's, i don't think they were using starter generators anymore, i could be wrong though. But this definitely isn't a B80. This things got high and low too.
There isn't a visible model number on the thing. it had it on the belt shield, but over the years the label fell off. It was an 8?? The first digit is HP, and it came stock with an 8HP kohler. and last digit is the year. it was either an 87 or 88. leaning toward 88 because of the way wheel horse is written. so its probably an 8?8, maybe an 868, 858, 878. I don't know enough about wheel horse to totally figure it out.
ah, sorry i forgot to write that, but this wheel horse is either a '67 or '68 the "6" from 1968 are implied. its a 3 digit model number, the first is the HP, second is the configuration for the trans, and the last digit is which year it was in the 1960's. Kinda confusing.
Pretty much all of my tractors are from the 60's. i have a few from the 70s but thats about it.
Yeah, but its on my raider 10, it came with the raider. and i'm hanging onto that thing like crazy because its such an awesome design, it mounts, all the way back on the rear axle, so all the weight you push with the plow, goes directly to the rear tires! and it pushes all the resistance down for traction. so the harder it is to push, the more traction you get... just awesome. Bolens plows bolt right on the front axle and its retarded in comparison. useless almost.
Thats not too far, 90 miles, about 2 hours. We might be able to work something out. Thats got the high low trans in it also. Hoods in decent shape and all
we have a wheel horse c-121 and are getting it faster for a lawn mower race, we have changed the pullys to bigger at the front and smaller at the back, removed the govner and got rid of all the weight we can, what else can we do to increase the top speed?
Is that a 12HP? Thats alot of power if it is. if you still need more spee, you can put an even bigger pully on the front. Go as big as you want :) don't go too small in the back though, because at a certain point, too small will just slip. the bigger diameter pullys get better belt traction. But yeah, that and bigger tires. but then its more top heavy, and thats not the greatest thing if you're going to go pretty fast.
haha, There's a tractor, haha, and a guy on it, haha, and, oh man, this part really gets me the best, hahahah, So he's a hillbilly and his family are inbreeders!!! hahaha! man...Can't get enough of that.
You know, at first glance of this video, i would have thought it was just some people having fun with some stuff... But man am i a fucking idiot. Clearly, Cliché's are the way to go.
i watch this about once a week and i still laugh, i wanna find one of these old wheelhorses and change the pulley size and make it go 80mph lol. im still keeping my eye out for one.
hahaha... that IS a big pig! did you gear it different it fuckin flys... you could have a ball with it in the snow here in Ottawa... bylaw would be all over you.
Don't look dangerous to me.... lol!!! I got a video of my stock wheel horse. I tried that with my massey furgesson tractor but it doesn't have a ton of power. What kind of gearing and stuff did you use? H.P.? 5....10....20?
:) yeah, it just seems dangerous i guess. when your riding it and you thinking about it flipping sideways on you or something... i think it would hurt like crazy! :) This thing really doesn't have any power, its a 5HP engine. gotta go alittle down hill to get the 23 MPH top speed out of it. The massey's are heavier too, that could have something to do with it. I'll send you the video i made of making this wheel horse. :)
Thanks! haha, yeah. sometimes that gets to me. people just barely get any words out to ask stuff, and aren't even nice about it. seems like bad attitudes. :)
Nah, i've got 3. this one, a 606, and a raider 10.
This came with an 8 hp kohler in it, but that broke the rod while idling one day. it used to go about 5 MPH. Drew let me use his trashpicked 5HP honda, OHC engine, and i put different pullys on it. did about 23 MPH. Didn't have any power in high gear though. Needed more HP.
The raider 10 has a 5HP tecumseh in it right now, and it does about 8 MPH with the pullys on it.
i got a 1986 420-lse it's bad ass with a 20 horse power kohler hydrostatic with a race steering wheel and chrome exhoust and rims and a leather race seat. and tecumseh is shit they fucking suck at making motors.
The 5HP temcuseh is ok, its off a go cart. its got more power then the worn out .5.5hp honda had. can do some serious wheelies with it. hasn't let us down yet. and i had an old 60's 6HP cast iron block tecumseh horizontal shaft that kicked some ass for a while. always ran perfect with ALOT of power, till i over reved it and broke the connecting rod. Tecumseh's do kinda suck though. don't normally hold up. i have alot that have alot of power, but blow crazy amounts of oil out the exhaust.
State to me what you are asking for. Do not just write 4 words, and then ... If you are asking for something, be specific, and let me know. If you want me to help you out, you shouldn't be vague or uncooperative.
hey nice wheel horse.. i did the same to my 1976 a-100. its my pulling tracter.. it has lugs in the back with 40 pounds of wiendshield wiper fluid in each one. i straight piped it too! it also has the original 10hp engine in it.
haha, you would think it could do that... but yeah. i kinda just made it to drive. But it uses a seperate pully on the engine for the deck, and i only have that one pully on the engine for the transmission. the 5HP engine wouldn't be able to handle the mowing deck very well. especially if it had to spin it faster then normal. It came with an 8HP engine originally.
yea me and my dad tuned up our old 198 wheel horse it's the most damn reliable mower he has owned we cut the grass with it now instead of the 2007 22hp husqvarna tractor with 52" mower deck.
It has the 12.5hp briggs i/c gold 286707, they are known for having a badly cast rod, which likes to catastrophically fail. But it hasnt yet. Im gonna put a rod from a 14.5hp OHV in it this summer and some new rings, it burns oil.
yeah, Wheel-Horse's are serious Wheelie machines! :) we all were taking turns on another one today, doing awesome fun balancing wheelies as long as we could. some times flipping backward.
Always leave the governor :) the governor helps maintain throttle position, when you apply a load. its a good thing to have. just put more tension on the spring that goes to the governor, and the rpms will scream like this thing does. but this is an overhead cam, and thats the kind of engine you want to be reving really high. way better with high rpm's. :) honda's are always good with the high rpm thing though, with the short stroke and all.
I like your vids, and am subscribed, but I always feel pain when I see one of these old beauties abused...
NRGearz 5 days ago
@NRGearz
I understand that man. But you have to keep in mind: most of the old garden tractors in the world, go to a scrap yard, and are crushed, torn apart and melted down. We're just giving them a second lease on life. one for fun.
tommartyn 5 days ago
Comment removed
jeepswillys7252 1 week ago
you guys are fucking krazy as hell, just my type of people
donkballs1 2 weeks ago
@donkballs1
hahah, thanks man :)
tommartyn 2 weeks ago
@chernobyl916
It could be. Normally hydro's don't roll well unless they are moving themselves. Bolens I think use an axle pin to disconnect the one hub for rolling, then the spider gears just spin, in stead of turning the input shaft.
tommartyn 4 months ago
where could i find one of these babys? i wanna go through some think fields with em
Crossoffire13 5 months ago
@Crossoffire13
:) Nice man. The best place to find them is in peoples yards. Keep an eye out when you drive around. always look in peoples yards for a little bit of red in the shape of a tractor :) Could be a wheel horse. If not, it could be something else cool, and they might want to just get rid of it, or sell it cheap. :) Find alot of stuff by just asking people.
tommartyn 5 months ago
WOW YOU HAVE A WICKED PROPERTY! ;)
craicrazy 5 months ago
@craicrazy
Thanks man! Yeah, we're really lucky
tommartyn 5 months ago
Yeah, this brings to mind the phrase "Hold my beer and watch this !
Bluezman01 5 months ago
sweet tractor man.
jewsychicken 6 months ago
@jewsychicken
Thanks!
tommartyn 6 months ago
dickhead how old is that pig? hit me bach bitch
4inches4u 7 months ago
@4inches4u
Its a 2012 and a half
tommartyn 7 months ago 5
@tommartyn Coolie:)
4inches4u 7 months ago
lol nothing like getting drunk and riding the mower around
gregrocks89 7 months ago
HEY MAN WHAT MODAL WHEEL HORSE IS THIS ONE, AND HOW DID YOU GET IT GO SO FAST!! PLEASE DO A VIDEO ON THE PRO AND CONS
tazzees 9 months ago
@tazzees
YO! :) i'll send you a video where i'm talking about how i made it fast. The cons were the way i had the belt running, it fell off the pulleys alot, and also the 5 hp engine i put on it, didn't deal well with the high speeds. Didn't have enough power.
tommartyn 9 months ago
what sizes are they pullies?
MrHickfarmer 9 months ago
Man, that thing is fast! That was funny seeing the tractor just go off on its own - you could do tractor bowling with some 55 gallon drums or something!
eatyerbeans 10 months ago
@eatyerbeans
Awesome man, thanks for the suggestion. I might make that happen :)
tommartyn 10 months ago
I have just as much country in me as in you guys,screw all of those queers that are making jokes and putting bad comments. By the way,where do you live man? I'm in Tennessee.
baaambam4ever 10 months ago
@baaambam4ever
haha :) thanks man. we're up in eastern PA. where in tennessee? I was down in Kingsport a few times. there was alot of awesome tractors, trucks, and cars down there i wanted to get my hands on :) If only i had some money. You guys are lucky man, no inspection :) Theres alot of stuff i'd be driving on the road if it was like that here.
tommartyn 10 months ago
@tommartyn I'm in Gallatin,about 5 miles from the country side,but we live far enough into town that we can't shoot guns and have a good time,I still like to play around with mowers and go-carts though.
baaambam4ever 10 months ago
at 0:46 I lmao so hard xD looks like so much fun!
baaambam4ever 10 months ago
@baaambam4ever
Thanks man! yeah, it really is alot of fun man. especially when you have alot of people riding at once.
tommartyn 10 months ago
looks fun but it's too slow I got a 1970 wizard that does 40 mph
matacoos 10 months ago
@matacoos
Gotcha
tommartyn 10 months ago
are you using the governer on the engine? looks like fun! hows the tranny holding up?
madmowerz 10 months ago
@madmowerz
Yep, i always keep the governors on these engines, that way if a load gets put on the engine, it gives it extra throttle to keep the RPMS up where you have the throttle pulled to. i think i had it set up where the throttle had a stronger spring going to the governor though, so it was reving it a little higher then stock. The trans held up great. wheelhorse trans's are some tough bastards. as long as you don't grind them alot, they'll last forever. Not like peerless junk
tommartyn 10 months ago
looks like your havin a blast
borboleta1015 10 months ago
@borboleta1015
Thanks alot! Yeah, we're always trying :)
tommartyn 10 months ago
ghostrider at 2:42
ford17rox 11 months ago
who needs a 4 wheeler? looks like fun lol
blueovalfan23 11 months ago
@blueovalfan23
Thanks man! yeah, it is fun, and this isn't half of what we get into with these beasts.
tommartyn 11 months ago
the other nascar....
Unguidedone 11 months ago
evry wheel horse u hav my grandad has one of to idk if i could do that to his tho hahaha but it is nice to see a few still out ther movein under ther own power keep em man ther getin hard to find and is that a bigger motor or what did u do to get it to run that fast?
68chev4x4 1 year ago
@68chev4x4
haha, yeah, your grandad probably wouldn't appreciate that.
there are tons of wheelhorses out there man. And i'm sure there always will be :) people love these machines.
A bigger engine won't make it go faster, you have to put a bigger pulley on the engine, or a smaller pulley on the trans, or both, to make it go faster. This came with an 8HP kohler, and it blew up, so the engine in the video is a 5HP honda, off of a pressure washer. :) Over Head Cam, that thing can rev high! :)
tommartyn 1 year ago
@68chev4x4 You switch the pullys around there is one on the trans mission and u buy a smaller pully for the transmission and put a bigger one on the motor i did it to my wheel horse but lost 3rd get Ha ha
orangefreaker9 1 year ago
they just dont make stuff like they used too
spacechimp420 1 year ago
@spacechimp420
Not even a little. :)
tommartyn 1 year ago
i have a '76case 220 and she can do about 25 mph
adt121494 1 year ago
@adt121494
Nice! thats probably a pretty stable tractor at higher speeds. this thing as a death trap
tommartyn 1 year ago
@tommartyn o hell yeah i need the take the deck off and get about 5 more miles per hour. they made good tractors back then. for a stock mower like the case, it sure is fast.
adt121494 1 year ago
@adt121494
I don't know if taking the deck off will give you more speed. Tractors normally top out due to gearing, and RPM limitations, not due to weight. This thing probably did 5.5MPH stock, and you could load on as much weight as you wanted, or take off as much as you wanted, and it would go the same speed.
Those case's are really awesome tractors man. What size kohler is in it? is it hydro or gear drive?
tommartyn 1 year ago
@tommartyn it has a 10 horse and is hydro. i think for a stock 10 that thing is pretty fast
adt121494 1 year ago
@tommartyn o hell yeah i need the take the deck off and get about 5 more miles per hour. they made good tractors back then. for a stock mower like the case, it sure is fast.
adt121494 1 year ago
i have a '76case 220 and she can do about 25 mph
adt121494 1 year ago
Crazy rednecks
Cr250FULTROTTLE 1 year ago
@Cr250FULTROTTLE :Yeah, but just like ME---you'd LOVE to get in there with 'em, wouldn't ya???☺!
bruno640 1 year ago
@bruno640 yeah thats true it is fun as hell :P
Cr250FULTROTTLE 1 year ago
Take it apart and sand it down then prime it and then spray it flat black and put flames on it and then put a clear coat. it would look nice
FlickTricksOffical 1 year ago
@FlickTricksOffical
That would look pretty vicious man :)
tommartyn 1 year ago
@tommartyn did the 6.5 bolt right up
green2stroke 1 year ago
Duse that alsome. i have a friend who for the 4th of July put a moped engine in his 1960s wheel horse..... it does something like 30 miles an hour...... very scary
Darklordkime 1 year ago
@Darklordkime
scary i'm sure. That thing must have been pretty fun though. :) I'd romp it
tommartyn 1 year ago
@tommartyn Yea we do, i got it on 3 wheels once.
Darklordkime 1 year ago
@Darklordkime :)
nice man, yeah, thats always safe
tommartyn 1 year ago
is that a a100 wheel horse
tractorking93 1 year ago
@tractorking93
I think its a 868, or 858, or 878. one of them, not sure which. one of the 8's is for 8hp, and the other is for 1968, and not sure what the number in the middle is for. But this had the 3 speed trans with high and low.
I looked up what an A100 was, and they were made from 76 to 77, and had 10HP briggs on them. Other then that, and the hood looking a little different, they are pretty much the same machines i'd guess. if they are Horizontal shaft like these.
tommartyn 1 year ago
sweet mower stuntin
TheAtxman8669 1 year ago
@TheAtxman8669
haha, thanks man, it is fun tipping these things backwards.
tommartyn 1 year ago
ill buy it 4 $50
MegaSierra123 1 year ago
@MegaSierra123
hahah, no you won't.
tommartyn 1 year ago
what state do you live in?
chromlic 1 year ago
Yer gonna fuck up that old gem be nice to it :) plz
DRNEGOLICIS 1 year ago
looks like a raider 12
E1A2T3O4N5 1 year ago
@E1A2T3O4N5
All wheelhorses have pretty much the same shape and all. BUT, if you really know wheel horses, this doesn't look like a raider 12. the grill is different, seats different, the entire frame, and hood are way shorter. stuff like that. though i think the trans might be the same. 3 speed, with high and low.
I do have a raider 10, which looks the same as a 12
tommartyn 1 year ago
Wheel horses kick ass mowers! I have 3 of those bitchs
TheFordman8868 1 year ago
@TheFordman8868
Yeah, they can kick some ass for sure!
tommartyn 1 year ago
Oooo a whole 23MPH....
runescapemusicman1 1 year ago
b 4 i was born in 1994 my dad had a 64 wheel horse with a posey track rear end and it was identical to this one hahaha he said it was a fun fucker lol now i own a 67 cub cadet 123 and a 64, 71 1971 107 well 2 107s and a 63 100 and 2 1967 john deer 110
shephardjacdc 1 year ago
@shephardjacdc i got a JD 210 nice little tractors
DRNEGOLICIS 1 year ago
me likey
soadmonger 1 year ago
I'm not sure either, I'm pretty sure the b80 never had the starter/generator too, but high/low, it did. They made those into this century.
ThePolarisdog 1 year ago
Are you sure that's not a really old B80? It looks a lot like my B100. 10 horse Kohler
ThePolarisdog 1 year ago
@ThePolarisdog
All horizontal shaft wheel horses look pretty similar from the mid 60's up until the 90's. with the same basic setup, frmae, and shape. and alot of the years used Kohlers. But yeah, i don't think the B80 model was around in 1968. And by the time of the B80's, i don't think they were using starter generators anymore, i could be wrong though. But this definitely isn't a B80. This things got high and low too.
tommartyn 1 year ago
Wheelhorse buffs would die. That thing would crush a grown man with it's weight alone
ThePolarisdog 1 year ago
@ThePolarisdog
They are amazing machines for sure. And about half the weight of a bolens :)
tommartyn 1 year ago
What model is the wheelhorse in the video? its kinda hard to see
pontiacpanic79 1 year ago
@pontiacpanic79
There isn't a visible model number on the thing. it had it on the belt shield, but over the years the label fell off. It was an 8?? The first digit is HP, and it came stock with an 8HP kohler. and last digit is the year. it was either an 87 or 88. leaning toward 88 because of the way wheel horse is written. so its probably an 8?8, maybe an 868, 858, 878. I don't know enough about wheel horse to totally figure it out.
tommartyn 1 year ago
@tommartyn Thank you. would you have any tractors made before the 1970s?
pontiacpanic79 1 year ago
@pontiacpanic79
ah, sorry i forgot to write that, but this wheel horse is either a '67 or '68 the "6" from 1968 are implied. its a 3 digit model number, the first is the HP, second is the configuration for the trans, and the last digit is which year it was in the 1960's. Kinda confusing.
Pretty much all of my tractors are from the 60's. i have a few from the 70s but thats about it.
tommartyn 1 year ago
Would you happen to have a snow plow for it?
pontiacpanic79 1 year ago
@pontiacpanic79
Yeah, but its on my raider 10, it came with the raider. and i'm hanging onto that thing like crazy because its such an awesome design, it mounts, all the way back on the rear axle, so all the weight you push with the plow, goes directly to the rear tires! and it pushes all the resistance down for traction. so the harder it is to push, the more traction you get... just awesome. Bolens plows bolt right on the front axle and its retarded in comparison. useless almost.
tommartyn 1 year ago
I did the same thing with my sears ss15. It does about 15. Do you want the sell that old wheel horse? I want it without the engine
pontiacpanic79 1 year ago
@pontiacpanic79
Where do you live?
tommartyn 1 year ago
@tommartyn Franklin, nj
pontiacpanic79 1 year ago
@pontiacpanic79
Thats not too far, 90 miles, about 2 hours. We might be able to work something out. Thats got the high low trans in it also. Hoods in decent shape and all
tommartyn 1 year ago
This is what good mechanics do when they get bored. I totally dig this. I have an old Murry that'll do about ten MPH.
chakathewolf 1 year ago
@chakathewolf
haha, :)
Nice, 10MPH is a pretty decent speed. I think this thing did about 5.5MPH stock
tommartyn 1 year ago
poorman's fourwheeler
ipodsrdabest 1 year ago
@ipodsrdabest
More like, "Four Men's Poorwheeler"
tommartyn 1 year ago
try doing this with a 1992 simplicity!
drews1998 1 year ago
@drews1998 why
CHEVYMUDJUNKY 1 year ago
atv's are for noobs
wpepie 1 year ago
@wpepie
haha, yeah. Sometimes they are :)
tommartyn 1 year ago
What a complete moron !
nighthawkron 1 year ago
@nighthawkron
What, you mean like an idiot?
tommartyn 1 year ago
I could get my entire lawn done in four minutes with that thing.
TummyLover 1 year ago
YOU NO WENE SOMETHING HAPPENS AND YOU SEE IT HAPPEN ON CAMARA then the person say yer that didnt happen ?????????????????? 0:47
SMITHY2010LS9 1 year ago
@SMITHY2010LS9
He was just trying to be funny.
tommartyn 1 year ago
23 is slow, my craftsman would do 35 but it shattered the rearend and even blew up the 12 horse briggs.
michaelhilliard1 1 year ago
23 MPH is slow, I had a craftsman with a 12 horse briggs that would do 35 but I shattered the rearend drifting. Keep up the good vids.
michaelhilliard1 1 year ago
Damn that looks like fun!
thibdrz 1 year ago
do you lick your fingers when your done jerking off?
hanratty450 1 year ago 4
@hanratty450
Not unless i stuck them in my asshole. Why?
tommartyn 1 year ago
we have a wheel horse c-121 getting ready for a lawn mower race, any tips to make it faster?
sammiguel92 1 year ago
we have a wheel horse c-121 and are getting it faster for a lawn mower race, we have changed the pullys to bigger at the front and smaller at the back, removed the govner and got rid of all the weight we can, what else can we do to increase the top speed?
sammiguel92 1 year ago
@sammiguel92
Is that a 12HP? Thats alot of power if it is. if you still need more spee, you can put an even bigger pully on the front. Go as big as you want :) don't go too small in the back though, because at a certain point, too small will just slip. the bigger diameter pullys get better belt traction. But yeah, that and bigger tires. but then its more top heavy, and thats not the greatest thing if you're going to go pretty fast.
tommartyn 1 year ago
that one goes a little faster than mine HAHA this is awsome :-D
NomaDairy 1 year ago
@NomaDairy
thanks man :) thing was pretty quick
tommartyn 1 year ago
Does You Family Tree Have Any Branches???
TheScooterpimp 1 year ago
oh, Hahahaa, Man, (Slaps knee) ahhhaahaha. Damn... Seriously some funny brilliant stuff man.
haha, There's a tractor, haha, and a guy on it, haha, and, oh man, this part really gets me the best, hahahah, So he's a hillbilly and his family are inbreeders!!! hahaha! man...Can't get enough of that.
You know, at first glance of this video, i would have thought it was just some people having fun with some stuff... But man am i a fucking idiot. Clearly, Cliché's are the way to go.
tommartyn 1 year ago
This thing is like the Mad Max of lawn mowers. I love it! Admire the way you handle it. It's like you're one with the mower. Ha!
ole9421 1 year ago
@ole9421
haha, yeah, you get to know them when you build them :)
tommartyn 1 year ago
Hillbilly Heaven, I am envious!
bbo40 1 year ago
i watch this about once a week and i still laugh, i wanna find one of these old wheelhorses and change the pulley size and make it go 80mph lol. im still keeping my eye out for one.
hheywire 2 years ago
haha, :) nice. Yeah man! they are out there for sure :) Be careful with 80, this thing starts getting squirrelly around 20 MPH
tommartyn 2 years ago
Comment removed
dale3858 2 years ago 2
Nah, We start out with the broken neck. Not sure what breaks eventually... :)
tommartyn 2 years ago
hahaha... that IS a big pig! did you gear it different it fuckin flys... you could have a ball with it in the snow here in Ottawa... bylaw would be all over you.
teflondon91 2 years ago
can you tell me how much HP plez
Joshua5654 2 years ago
Sure! Its got a 5HP Honda OHC engine on it! :) It came off of a pressure washer
tommartyn 2 years ago
i got a 1962 wheel horse with a 7hp kohler motor
billtheworker 2 years ago
Get a wheelie bar for that thing! lol
it would probably tip over real easy too if you turned in too fast, gotta love no helmets!
mercedesfan650 2 years ago
holy shit
thomas12345thomas1 2 years ago
You kids be careful! Yer gonna put an eye out! ha ha ha
jeffpicks 2 years ago
Don't look dangerous to me.... lol!!! I got a video of my stock wheel horse. I tried that with my massey furgesson tractor but it doesn't have a ton of power. What kind of gearing and stuff did you use? H.P.? 5....10....20?
ModelKarKid 2 years ago 2
:) yeah, it just seems dangerous i guess. when your riding it and you thinking about it flipping sideways on you or something... i think it would hurt like crazy! :) This thing really doesn't have any power, its a 5HP engine. gotta go alittle down hill to get the 23 MPH top speed out of it. The massey's are heavier too, that could have something to do with it. I'll send you the video i made of making this wheel horse. :)
tommartyn 2 years ago
I used to wheel stand my old MF135 like that years ago.
But she is so old now it would feel like punching your granny in the face for fun. .............. I don't do that anymore either.
biggest23 2 years ago
0:37 he loses it and has to chase it lol
LMFAO
jack9102 2 years ago
haha, yeah i knew that something was going to happen when went to stop the burnout. so i was ready for action :)
tommartyn 2 years ago
Nice toy! I like your post about not being vague and uncooperative when asking a question....man they will let ANYONE on this internet huh
joeseif 2 years ago
Thanks! haha, yeah. sometimes that gets to me. people just barely get any words out to ask stuff, and aren't even nice about it. seems like bad attitudes. :)
tommartyn 2 years ago
is that the only wheel horse you got? and what kind of motor is in there because that is damn fast.
farmsquidly 2 years ago
Nah, i've got 3. this one, a 606, and a raider 10.
This came with an 8 hp kohler in it, but that broke the rod while idling one day. it used to go about 5 MPH. Drew let me use his trashpicked 5HP honda, OHC engine, and i put different pullys on it. did about 23 MPH. Didn't have any power in high gear though. Needed more HP.
The raider 10 has a 5HP tecumseh in it right now, and it does about 8 MPH with the pullys on it.
tommartyn 2 years ago
i got a 1986 420-lse it's bad ass with a 20 horse power kohler hydrostatic with a race steering wheel and chrome exhoust and rims and a leather race seat. and tecumseh is shit they fucking suck at making motors.
farmsquidly 2 years ago
The 5HP temcuseh is ok, its off a go cart. its got more power then the worn out .5.5hp honda had. can do some serious wheelies with it. hasn't let us down yet. and i had an old 60's 6HP cast iron block tecumseh horizontal shaft that kicked some ass for a while. always ran perfect with ALOT of power, till i over reved it and broke the connecting rod. Tecumseh's do kinda suck though. don't normally hold up. i have alot that have alot of power, but blow crazy amounts of oil out the exhaust.
tommartyn 2 years ago
how to you get them to go that fast??
spartin153 2 years ago
I'll send you the video showing what i did :)
tommartyn 2 years ago
This has been flagged as spam show
Can I get a link......
douger0500 2 years ago
Can you get a link to the video of showing what i did with the wheel horse?
tommartyn 2 years ago
if you send it....
douger0500 2 years ago
State to me what you are asking for. Do not just write 4 words, and then ... If you are asking for something, be specific, and let me know. If you want me to help you out, you shouldn't be vague or uncooperative.
tommartyn 2 years ago
hey nice wheel horse.. i did the same to my 1976 a-100. its my pulling tracter.. it has lugs in the back with 40 pounds of wiendshield wiper fluid in each one. i straight piped it too! it also has the original 10hp engine in it.
snwbordx3dude 2 years ago
Nice! that has to be cool with 10HP pushing it. the 5 on this is not quite enough.
tommartyn 2 years ago
how fast can it spin the mower deck
thevideolord 2 years ago
haha, you would think it could do that... but yeah. i kinda just made it to drive. But it uses a seperate pully on the engine for the deck, and i only have that one pully on the engine for the transmission. the 5HP engine wouldn't be able to handle the mowing deck very well. especially if it had to spin it faster then normal. It came with an 8HP engine originally.
tommartyn 2 years ago
yea me and my dad tuned up our old 198 wheel horse it's the most damn reliable mower he has owned we cut the grass with it now instead of the 2007 22hp husqvarna tractor with 52" mower deck.
bigsteve458 2 years ago
nice way to ghost ride the whip
dillonwadej 2 years ago
my craftsman goes 15mph, has a 4 inch rear pulley
DEFiANCE665 2 years ago
Nice! that thing probably has alot of power at 15MPH too, unlike this thing at 23 with only a 5HP engine at the helm
tommartyn 2 years ago
It has the 12.5hp briggs i/c gold 286707, they are known for having a badly cast rod, which likes to catastrophically fail. But it hasnt yet. Im gonna put a rod from a 14.5hp OHV in it this summer and some new rings, it burns oil.
DEFiANCE665 2 years ago
yeaa i have an old bolings but it needs a motor... its very big to lol
jjjmyers 2 years ago
Awesome! what kind of bolens is it?
tommartyn 2 years ago
im not too sure... a friend gave it to me a long time ago... its in my barn ill have to go look at it in a bit
jjjmyers 2 years ago
They are some cool machines! I hope you get it going.
tommartyn 2 years ago
freaken sweeT!!!!!!
amerknAX7 2 years ago
shooot i tell u whutt..
rollsroyce2006 2 years ago
1:27 what is that white car?
freakboy100101 2 years ago
Looks like an old Datsun 280Z
imthejoker4u2 2 years ago
its 1976 toyota celica
dirtrunner800 2 years ago
haha sweet name, wheel horse. I like it :D
stevo121 2 years ago
yeah, Wheel-Horse's are serious Wheelie machines! :) we all were taking turns on another one today, doing awesome fun balancing wheelies as long as we could. some times flipping backward.
tommartyn 2 years ago
wht do you do to it to make it like that? I got one that runs fine i just want to it MOVE!
SaintsRule84 2 years ago
change the pulleys, bypass the govenor, smaller tires would give it more power idk about speed tho.
Paxtionia 2 years ago
small tires= torque and stable. big = fast and tippy
rcjg24 2 years ago
Always leave the governor :) the governor helps maintain throttle position, when you apply a load. its a good thing to have. just put more tension on the spring that goes to the governor, and the rpms will scream like this thing does. but this is an overhead cam, and thats the kind of engine you want to be reving really high. way better with high rpm's. :) honda's are always good with the high rpm thing though, with the short stroke and all.
tommartyn 2 years ago
If you want to see how i altered this beast, you could check out the video from soon before this one, where i show what i did. :)
tommartyn 2 years ago
was that a late 60's Fairlane 500 I saw?
joegfjh 2 years ago
That would most likely be the 69 Chrysler 300! :) amazing awesome car :)
tommartyn 2 years ago