Added: 2 years ago
From: esamsiam
Views: 30,251
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (189)

Sign In or Sign Up now to post a comment!
  • i want an LS7 in my TA!

  • how much hp?

  • my 02 ws6 would be the black spot in the rearview..

  • Wind noise.

  • I like the stall. What size is it?

  • @thomass151 Its a 6spd 

  • @thomass151 no stall

  • this eats my T/A alive

  • how many seconds do you make in a quater mile

  • Sick

  • i think you need to check the oil pressure... looks a little low

  • @besstrokednova Nah thats normal. Mine does the same thing, It stays at the half mark while driving but when idling or standing still it drops down to about 1/4th...

  • @besstrokednova GM states 5psi at idle is adequate oil pressure flow.

    20 is enough lol.

  • awesome

  • @K2Carbides Mean while your doing 40 in a 50 in front of me texting this onto youtube... Could you please pull your Prius off so I can pass by scotum groper.

  • shitty oil psi for havin a 427 ehh?

  • if your speed is off 5 mph at 35 it more than doubles at 60 and so on

  • @TheRyanbenson Are you retarded? So at 120 it's 20 off, and 150 it's 25? Rethink that.

    Mines off by 5 @ 65, it's off by 5 the entire time.

  • @TheRyanbenson in another vid his speedo read 157 at 152. does that clear up any questions?

  • @TheRyanbenson Actually if its off by 5 at 35 then it would be off by approx. 14% so at 60 it would be off by 8.4. At 100 it would be off by 14. Speedometor error works in persentage not a fixed number

  • i know this video is old, but goddamn. O_O props man.

  • Speedo is corrected for gearing?

  • @Burgeezy in one of his other vids he admits its 5 mph optomistic due to tire height.

  • @whatchamacallit6

    Gearing can make a larger difference in speedo error. That is why I asked. His speedo climbs pretty fast for such a heavy car. It must be making 600+hp to keep the needle moving that fast...and probably tops out in 6th not much faster than this video shows.

  • @Burgeezy i think he said 526 at tires.

  • WOW 0-100Km/h = 4 seconds :O

  • daaammnn!!!!..how do "rustangs" taste?:D

  • By by Whipple, kenne bell Cobra.

  • @IDontHateOnCars mmm, nope. twin screwed terminators dont fuck around

  • @powerviking  Of course they don't.

  • bad ass 427

  • needs oil pressure if that gauge reads correct.

  • is this you new red one or the black one couldnt tell in the one spot you see the hood

  • Comment removed

  • this thing is a freaken beast!

  • i WILL build one of these...

  • woww, great shfting!!

  • What Kind Of Rear End.?

  • @XxNuMb3r72xX not stock, ill tell ya that, lol

  • Comment removed

  • YEAAAAAAAAAAAAAA!!!! That thing is dirty!! And i thought my regular old ls1 trans was fast.

  • holyyy shiaaat!

  • gotta love the 14-21 years olds thinking they know something about engineering

  • thats not a car thats a fucking jet lol!!!!!

  • fake speedodometer is way off!!!!!!!!!!!!!!!!

  • @biginerartist really?... you do know this car has over 500 WHEEL horsepower... looks about right to me!

  • @biginerartist Are you a fucking tard?

  • WOW! man this thing is a beast!

  • i want a ls7 swap

  • @camarorswright  Me to

  • Nice car. I think you started out, the gas needle was on the right side of the half tank marker and at the end it was on the left of it hahaha more videos please

  • Good God this thing is a monster, love the LS7, best engine ever!

  • Oil pressure looked a little low.

  • jesus f uckin christ reminds me of my old trans am before i wrecked it.....

  • amazing car

    

  • wow, yeah, thats some serious torque, its like its not even stressin the motor, it just goes. sick swap, nice ride would there be such a transmission that would let that get 25mpg? aftermarket of course

  • id love to do an ls7 or ls3 procharged but the more i look the more iwant a ls9 but they are 24k for a motor.

  • Now that I have silenced the dipshit hater... fucking amazing car man.. i see a RIP though.. what happened?

  • @voradeaur A very sad sad thing happened. Watch the "Death of a Trans Am" video.

  • Nice

    

  • o really? that fast huh? to bad u put different gears in in the rear and threw the speedo off. ducking idiot

  • @xxmerryman7xx You are such a dipshit... he is running 3.42's... which is FACTORY for the gear. Do a calculator... at 6200 rpms (what he revs it to) you see 52-54 on the speedo... which is a 3.42 (bone stock for M6) rear gear.. learn your fucking cars before you start bitching about something that could smoke your fucking doors off.

  • @voradeaur okay brooo. my toothbrush will smoke yourt ass

  • o really? that fast huh? to bad u put different gears in in the rear and threw the speedo off. fucking idiot

  • @xxmerryman7xx You do realize that different speedometer gears are available right?

  • Wind noise? People are jealous because this car kicks ass and theirs dont. Brush off the wind noise bit, and keep on doin what-cha doin. Hows that red Trans Am comin along?

  • WAIT WAIT. I only heard 5 gears.. And he hit 5th at like 140.. Does that mean this will top 180 easy?!

  • Well I was thinking about an LS7 for my WS6 and you helped me make up my mind. What do you have done to it?

  • for an Auto? all you need to do is Put a low psi turbo and ur in business :)

  • Stock V-TEC Civic is much faster.

    /joke

  • @CalypsoNotch408 especially if you have the soup can exhaust and some stickers, then you got a real beast!

  • holy shit that was fast,,,,,,, REAL FUCKIN DEAL is that puppy..... WOW

  • You shook the earth with that run. 

  • Intense

  • props man straight up. You shut all the non believers including myself up. This is one sick ass car... naww... sick doesn't give it justice. Give this car 6 out of 5 stars.

  • dude that is so fuckin bad ass! fuck those gay ass haters! some day im gonna have an ls7 in my c3 vette

  • I hope to god that oil pressure gauge isn't right lol

  • Because of how light these things are its more like 600 at the tires lol.

  • wind noise hahahahaha those LS7 motors are mean. Did you do the swap yourself? if so was it pretty time consuming? I have a built LS1 now and have been thinking about doing this

  • that is one fast ass TA

  • Are you even getting into the final (6th) gear!?

  • what ur 1/4 time?

  • that thing is fast!

  • perosnaly i have an ls3 bored out to 6.6 which is 402 i put out 580 at the wheels on 110 closer to 520-530 on the 93 shit but at the same time i have 250 surprise that puts me closer to 800... i think this guys number are a lill low or extremely Conservative although i must say my power is extremely affected to heat and humidty...

  • @MarcsMobileAudio you cant bore out any ls engine to 427ci unless you sleeve it.

  • @GroundZ28ero There all sleved or should i say the have "iron liners" but you can still do it to any LS block

  • @MarcsMobileAudio so i can take my 346ci block, swab it out to 427 and not weakin it.

  • @GroundZ28ero with darton sleves i think max bore is 4.120 or 4.125 one of those when ever you bore a motro you risk weaking it. If it was N/A I would do it If blown i wouldn't thats why the ls9 is pretty much an ls3 with a blower on it and not the ls7 with a blower

  • The ls7 also has a higher comp ratio then the ls3

    @MarcsMobileAudio

  • @GroundZ28ero Your a shit tard if you think they didn't lower the compression. They could have done the same with the ls7 but the fact remains, the cylinder walls are still to damn thin. Now, honestly I'm sick of mind fucking you so could you quit the cyber arguing?

  • @MarcsMobileAudio im not arguing, i was agreeing with you. but it is totally posable to add forced inducion to an ls7. its not all in the bore that makes up the cubes, its also the stroke. but of course you already knew that.

  • @GroundZ28ero yeah i still wouldn't go over 700 horse on that block and at 638 crank (usually more) I wouldn't and gm didn't want to chance it....

  • @MarcsMobileAudio what did you do for weight reduction in the 5gen, i dont wanna go total race but have it in the 500hp range and be able to run low 11sec times at the track. i dont want to remove the back seats, but i think A arms and subframe connectors are next on the list.

  • @GroundZ28ero CF Hood, front Quater Pannels, Doors, trunk, spoiler, Stock seats, tire repair kit, Pedders track 2 supesnion & pdfat which basically removes every thing except the stock cradles which will once some one makes tublars I will say that the majoirty was lost via seats,doors and trunk. i went from 3987 (weighed at weigh station) to 3544

  • @MarcsMobileAudio what kind of setup are you running on whatever it is you drive.

  • @GroundZ28ero 6.6L Bored, stroked, & Sleeved LS3, all forged roating assembly,billet main caps, studs, 12.3:1 Comp ratio Stage 3 heads(with gm inconel and stainless intake and exhaust valves), Stage 2 Cam, F.A.S.T. Intake, Slightly Ported TB, headers with 1 7/8 " primary, wet direct port n2o setup. bigger injectors in line fuel pump E-85 for racing and 93 octane when that runs out.

  • @MarcsMobileAudio nice, im currently stock on the 2000 z28, but the 2002 has a nice head cam combo from gmpp, nothing to crazy. some suspension upgrades, shift kit with a trany cooler, BBK TB, supercomp headers and gmmg exhaust. have yet to dyno and tune it.

  • @GroundZ28ero Nice your just starting out i see, my 5gen maro is only about 150lbs lighter than your car and spent double of what i spent in engine mods to do that. But well wroth it.

  • is this an ls7, or is it a c5r 427, or an lsx 427, or could it be a gmmg ls6 427.

  • @GroundZ28ero looks to be an LS7...

  • @GroundZ28ero LS7, C5r 427 is uneed unless you want 800 horse n/a and you want to drive four four years straight at the limit, LSX 427 is just an iron block ls7

  • @MarcsMobileAudio cant you get the lsx 427 in either iron of alluminum blocks. and i know berger made ls6 427 for the zl1 CAMARO'S AND DICK HARREL CAMARO'S

  • @GroundZ28ero NO go look on GMPP LSX = the ONLY iron block, you can bore out any ls enigne to 427 and bigger the biggest i seen was 460...

  • @GroundZ28ero I would like to chnage this the C5-R racing block is all AL 427 too. but thats upwards of 6K Just for the BLOCK

  • i LOVE your car, how hard was the swap to the Ls7?

  • nice men!!!!!! jala de poca madre el trans

  • What gears were you running?

  • let's see a mustang compete with this.

  • @GroundZ28ero tisk tisk tisk, this car was 40 grand new, and has a 15 grand engine in it + bolt ons. You could get a scary fast mustang for the same price...dont hate on ford to much, at least its not a mopar.

  • @exile907 brand new yes, but now you can find decent ones for 15,000$. then the 15k motor along with all the supporting modes and your looking at 40k. and i dont think theirs to many n/a mustangs that could keep up.

  • @GroundZ28ero lol i know, i have an 02 ws6 sitting in washington waiting for me to drive her. having driven her, there arnt many NA mustangs that keep up to her stock... much less with an LS7 shoe horned in.

  • pretty badass, although the oil pressure looks pretty low.....

  • @noobsaibat yeah good catch wth is with that?

  • Amazing car. I was considering doing a ls7 swap into my 98 formy or maybe into a 77-78 trans am...or 67-68 firebird...hmm

  • holy fuck man, does it really have an ls7 swap???

  • Love to see that, impresive!

  • Wont a rear end gear change throw off the speedo readiing..... Stock gears? what ratio? BTW-sorry to see that it came apart.

  • R.I.P THIS TRANS AM ='[

  • dam thats bad ass

  • HAHA thats funny i was just reading that comment when i clicked to view this video ... sick car..

  • Nice ass car. What many people failed to mention is badass shifting with a camera in hand at WOT. Lol

  • dam

  • That's SCARY fast. woww props on your T/A brotha.

  • How much does an LS7 swap cost?

    That was freakin beast...

  • tons, prepare for a 5-7 grand drop after its all said and done, parts wise not even including labor and all that fun stuff :)

  • Oh, probably more than that on the engine alone! (that is if you go the route of buying a new one from GM). A Chevy dealer in RI listed one for more than 12 grand! You can probably shop around and find one cheaper, but I don't think think you'll save all that much.

  • all hail the LS7!!!

  • whats the ls7(like a 454?)

    what mods do you have in it

  • to 155 Trans Am 427 LS7 in car

    it only says it in the title...

  • nope its a 427 out of the z06 vet. sick motor. produced 505 hp stock

  • Nice car. I have to agree about speedo calibration though. If you really have 3.72 gears then those speeds in each gear don't look right. Unless you have REALLY tall tires. But, I'm not a hater, that's one killer car.

  • notice how he's shifting around 6500

  • yes thats what the 427 ls7 redlines at. beastly huh? lol

  • amen to the fart cannon people. sorry bout your luck. this is a REAL car american pushrod power! amazing car man. with an ls motor ya dont need wind noise just shut up and hold on!!

  • I like your "wind noise" comment at the end. You have one fucking bad ass Trans Am. Screw your haters. They are just jealous because they either have slow shitty imports with loud fart pipes or no car at all. Five Stars!

  • Nice bro----be careful.

  • He is full of shit. He has an aftermarket gear without a speedo calibration!! THANKS HAVE A GOOD DAY!

  • dont be a douche, this car has a little over 500 wrhp. a c6z06 pulls almost as hard so SHUT THE HELL UP

  • that thing moves man. whats the top speed?

  • omg, that is BEAST! nice car man, sounds great.

  • That thing sounds great!

  • Haha your car can reach 150 and back to 0 so fast i bet you can turn down your block get to 150 and come to your house slowy enough to gently pull in your driveway lol nice car, i envy you for it lol

  • 0-60 in 4 seconds...and he wasn't even on it all the way. This car could blow a Lambo off the road...scary how fast it is.

  • LOVE IT!

    Ls motors never cease to amaze me

  • what´s your tranny ? your always in the red range and you hit 140mp/h in 4th ?

    hmmm...

  • the red is ENGINE RPM Dependant, im willing to bet that considering its an LS7...7 grand isnt asking to much from it...the stock 5.7 probably wouldnt like it though.

  • Nice car man.  Wish u were closer so I can run u with my grand national

  • 526 at tires, so about 620 at motor with15% loss through 6 speed and 10 bolt

  • Insane car man...the 10 bolt is a little scary though lol

  • @esamsiam WAs your clucthc slipping?

  • @esamsiam It's a 15% loss with a 4 speed, more like 9% loss with a 6 speed.

  • @esamsiam hahahah 10 bolt....

  • @esamsiam 10 Bolt?! I can't believe it lasted 5 minutes.

  • How much horsepower does this thing push?

  • yea...that fucker is fast..

  • lol dam this guy has tried everything to persuade you dam ignorant pigs!!! it all started with you couldn't hear the road/wind now is the gears lol wow

  • almost looks like you have ring and pinion gears and did not reprogram your speedometer, not saying if you did or not but I used to mess with people in my T/A by doing this making them think they were going faster then we were. But then again I could not see out of your car when you were doing this so I cannot say but your speedometer climbed really fast even in the top end but then again I have no clue what you have done just looked a little fast for it to get to top speed.

  • GOOD FUCKING LORD

  • Wait wait, I just looked. "You got 4.10s on a 3.42 tune." LOL.

  • That's a low 9 second street car essentially. With a stock LS7 block, and in a heavier vehicle?

    How else would you explain the fact that he just went 55 in first gear and over 140 in fourth?

  • Well he must have one of them things called a tRanZmiTTion.

  • Not entirely stock engine, he's got a little bit of work done to it to make 520hp at the wheels. Look at the rpm's, he's shifting between 6500 to 7000 rpm, LS1's cant do that reliably unless internally built to take those rpm's. The guy is also running 3.72 gears which is a tiny step up from 3.42 gears.

  • The title says LS7 - they redline at 7,000 stock.

  • Lol, "wind noise". Guess the noobs saying it was on stands before are searching for more excuses. Now it'll be that you secretly put in 4.10 gears and didn't get the speedo calibrated again!

  • Wow!!! is that a stock LS7??

  • Comment removed

  • Thing is sick. I love the "rare bird sighting" vid. Where u from? What kinda gearing you running? Next time they complain about wind noise just blow into the mic on the camera on one of ur runs!

  • this is the real deal... not gears... he hits 140mph at the top of 4th at about 6500rpms... thats right where he should be with 3:42 gears... I would know because thats what my TA has...

  • my pants are wet- your videos are the greatest ! WOW, i want dyno numbers!!!!

  • how did you get the LS7 to work ?

    this is amazing i need one too =D

    did you need axLes and suspension and stuff ?

  • You got 4.10s on a 3.42 tune.  Regardless that's a sweet car.

  • did you do any suspension work?

    deff. thinking about getting a 427 in my camaro

  • 6500 rpm is when you really hear the power sweet car

  • ahhh I think I just creamed myself. Lol