hey, good job bud. i just finished painting my car, and im no pro so i dont have the right painting area. just a project i guess. is there any way for me to get little specs out of my paint? its a dark color and the specs are white, so it shows. someone mentioned buffing it out?
@cjmorton well, thanks for the advice, but this was a "blend job" when blending you need to do this. It is easier when painting a flat color like this but when painting micro sequence or fine metallic you need to watch the paint and make sure you get a good coverage before clearing. Thanks but I've done this many times and have been painting for 10 years.
Well what I do with Mica. Is doo a drop coat first because you need to allign the Metallic flakes and put an even full coat on. With flash off time obviously.
Dude where do you live? Can you install a body kit for me and paint my car? It's a 95 Lexus sc300. You can make a video on on it if you'd like. I'll pay you. I live near sf:)
the pop up messages are very annoying and distracting - keep them to the end or very beginning of the video but don't have them sitting there covering bits of the video.
@felix902008 Paint can last for 15-20 years if you take care of it! Keep it out of sun etc... I am talking about cars that are mostly covered and in a garage, you know show cars....
great video !??? 4 you ! when u use bondo like u did an before u primer it what grit will you need to sand down the bondo?? before you primer over the bondo thanks!!!
with some corections you can be one of top painters. You are spraying from short distance
that`s mean you know how the paint works . i saw many experienced painters which are spraying from 30-40 cm (one foot or over ) Actually they scare of run and what they do?
They add litle more reducer , more pressure
On the end they got shine but they never put
more than 20 or 30 microns (paint factory recomended 40-50 microns)
Are u kidding me,do u know what a tack cloth is?
oregrowncrawn 8 months ago
hey, good job bud. i just finished painting my car, and im no pro so i dont have the right painting area. just a project i guess. is there any way for me to get little specs out of my paint? its a dark color and the specs are white, so it shows. someone mentioned buffing it out?
MONSTERenergyX 11 months ago
@MONSTERenergyX Yes you can sand and buff them out! Check out the blog on learnautobodyandpaint . com
HowToPaintYourCar 11 months ago
Hey nice job did you forget the dent on the top of rear fender it looks so and next time use lighter surface primer...
hardick002007 11 months ago
heres a tip man. dont flick your wrist when you end the line. it causes your coats to be uneven and it will show later.
cjmorton 1 year ago
@cjmorton well, thanks for the advice, but this was a "blend job" when blending you need to do this. It is easier when painting a flat color like this but when painting micro sequence or fine metallic you need to watch the paint and make sure you get a good coverage before clearing. Thanks but I've done this many times and have been painting for 10 years.
Cheers
HowToPaintYourCar 1 year ago
@HowToPaintYourCar
Well what I do with Mica. Is doo a drop coat first because you need to allign the Metallic flakes and put an even full coat on. With flash off time obviously.
mfrowen 10 months ago
@mfrowen All you do is blend it.
HowToPaintYourCar 10 months ago
Not bad!!! But why wouldn't u take out the door handle???? Then dust that in separate! Way cleaner look!!!!
sxmejias1 1 year ago
@sxmejias1 The customer didn't pay for the extra work! :)
HowToPaintYourCar 1 year ago 5
@sxmejias1 Hahahahahahaha, because there was no need to
evan002 1 year ago
Where in Hawaii are you? I'm from Ewa beach. Your videos are very informative.
mxp2000 1 year ago
@mxp2000 Cool bro Thanks! I am in Honolulu
HowToPaintYourCar 1 year ago
Comment removed
mxp2000 1 year ago
Not bad at all dude.
TheRattrodder 1 year ago
@TheRattrodder
Thanks man! It did come out nice. For what he paid it was a deal :)
HowToPaintYourCar 1 year ago
Dude where do you live? Can you install a body kit for me and paint my car? It's a 95 Lexus sc300. You can make a video on on it if you'd like. I'll pay you. I live near sf:)
Nsxyy 1 year ago
@Nsxyy I am in Hawaii Brother! I think the shipping will cost you more than the job... lol
HowToPaintYourCar 1 year ago
the pop up messages are very annoying and distracting - keep them to the end or very beginning of the video but don't have them sitting there covering bits of the video.
tjf4375 1 year ago
@tjf4375 the usually come in handy well not much on this one but i mean u can take them off on the bottom right corner
puropotosino08 1 year ago
great work
stephanoskavala 1 year ago
how log does the paint last b4 u have to repaint it??
felix902008 1 year ago
@felix902008 Paint can last for 15-20 years if you take care of it! Keep it out of sun etc... I am talking about cars that are mostly covered and in a garage, you know show cars....
HowToPaintYourCar 1 year ago
how much is a full paint job??
drunkEmotions 1 year ago
how much does it cost to paint your car at a garage GBP
brutalkidde15 1 year ago
@brutalkidde15 well it cost me $100 U.S. for material
HowToPaintYourCar 1 year ago
hey bro thas nice job i like the kind a job where is tha man why dont you give me a job
malagfe 1 year ago
Looks good to me ! You seem like a Good Guy !!! Thanks Jason
6odie9 1 year ago 3
great video !??? 4 you ! when u use bondo like u did an before u primer it what grit will you need to sand down the bondo?? before you primer over the bondo thanks!!!
331lilcoupe 2 years ago
Just wondering why you carried your blend so far forward on the door?
jbrew1978 2 years ago
I was also blending the mirror..
=)
HowToPaintYourCar 2 years ago
Very good job,
with some corections you can be one of top painters. You are spraying from short distance
that`s mean you know how the paint works . i saw many experienced painters which are spraying from 30-40 cm (one foot or over ) Actually they scare of run and what they do?
They add litle more reducer , more pressure
On the end they got shine but they never put
more than 20 or 30 microns (paint factory recomended 40-50 microns)
Very good job
Mike61259 2 years ago
Top Lackierung mit cooler Kleidung. Oh Mein Gott lol
FSCLANSHARK 2 years ago
your very good man
AyashiFX55 2 years ago
dam this guy know how to do body work. great job.
mart182003 2 years ago
i wanna learn how to do this i buy and sell cars and its to much to pay a shop
253Dbaby 2 years ago
major dent in the back of the panel.they are hard to find, until the top coat comes on.then they show themselves :)
pellebjurman 2 years ago
yeah nasty dent in quarter panel, OUCH!
thedirector911 2 years ago
hey man you forgot to clean up the sticky stuff on the middle of the door
adi2200us 2 years ago 2
the molding goes over it....
keys2prosper 2 years ago
did you put the sound mic right inside the compressor?
mx444bee 2 years ago
yeah...lol
keys2prosper 2 years ago
nice man.. i wish i culd paint like you..
propm 2 years ago
You CAN!
keys2prosper 2 years ago