XBOX 360 COMPLETE JTAG TUTORIAL - FROM DISASSEMBLY TO SOLDERING TO FSD PART 1/5 HD

[xXD4Z4Xx]

I like the videos but can you send me a video on how to wire up the lpt cable and does the second wire that you put on need to have the resistor on the end. Thanks.

[BushidosBestFan]

I have a Jasper is it the same ?

[pudinkk]

didnt see the reason why you removed the x-clamps,you need not do that as far as I know.rightt?

[Evan7557]

Add me on xbox.. My GT: NV Lobbies

[dgogolk1]

does this work with all of the phat motherboards?

[glitcher1995]

where can i find the things i nee at cause i cant find them

[valters68]

will it work on jasper motherboard?

[laxaustin13]

what is the xbox criteria in order to do the jtag? like does it matter when it was last used can you jtag any falcon motherboard xbox 360?

[UGTproductionz]

lol SOLDERING TO FSD PART 1/5 HD ObsessedWIthGTAIV

Subscribe Subscribed Unsubscribe Loading...

41 videos

Loading...

Loading...

[athletic734]

how do u know if its a falcon motherboard or a xenon?plz respond!

[GretchentheAlligator]

would doing this fix the e71 error

[Whiit3BoyModz]

will this work the same with QSB and a Xenon? sombody reply

[dragaodagua]

Works with Jasper motherboard?

[HEYPRESTO2010]

will this work on a jasper? plz can u get back to me soon :)

[zombieslayer322]

@bzmodz u have to buy them updated

[BzM0Dz]

hey bro do jtags still work becuase of the new dash board update ???

[yermawsafanny]

Hello what camera are you using here?

[Spongar141]

JTAGing works on any version (in fact the higher the version the better) you just need a console built before 2007 so like an xbox 360 pro and younger

[iratic]

Can this work on a xenon 2.0.12611.0 dash?

[weredeathis]

transistor method is only necessary on the zepher and opus motherboards

[2centthompson]

what i have a few zuestions i torn my xbox apart and it looks like this i wanted to jtag it without all them cords and stuff and this looks easy but can you show me in a video how you made that cord and and where could i get the diagrams at and im not sure with of those wires go were becuase i kinda couldnt see all of the wire when you put it on can you plz help me out im kinda of a newbie at this

[Yonjiroby]

can i do this with a zephyr motherboard ???

[Yonjiroby]

can i do this with a zephyr motherboard ???

[PurpleRabitHD]

i have that same headset

[sltgwt]

the vid ens at 14:59

[madcat941]

no one ever buys a boom mic and mic stand yet i always see all these nice ass camera with hd. the instead spend there money on a pair of over priced gaming headphones 

[madcat941]

bitches love virgins around 3:24

[madcat941]

its a virgin never been laid 0:25

[Spongar141]

@mjebis08 what do you mean "this way " this is the only way

[DanksterZone]

Can you post a link for the diagrams? That way everything we need is here except the other materials. Thanks for making the tutorial nice recording.

[rockistae]

my xbox can read burned games , i accidentally update it and it came backto a normal xbox .what to do now????

[coldlmy1]

@rockistae yep thats way u never try to update ur xbox !

in ur case u just have to take it to someone knows how to flash xboxes and he will flash it back to a good update!

[Keontae0756]

Does this work on Xbox 360 Slim

[mjebis08]

if you Jtag your xbox 360 this way can XBOX LIVE detect that your xbox is modded??

[FockingCamper]

@mjebis08 YES YOU DUMBASS

[mjebis08]

How so?



[mjebis08]

and is there away to make it undectable?

[FockingCamper]

@mjebis08 You cannot go online with a JTAG period. Microsoft instantly knows when you are using a custom rebooter, and automatically BANS your console.

[rockistae]

@FockingCamper actually you can . but your jtag will be gone.

[cokacutter]

i tryed to do this along time ago. xclamps are a bich. i also had to do a reflow so with the pushing and the pulling and the heat of reflowing it it kinda warped. it only lasted a week.

[Ramps97]

Xm hacks v4 inmean

[Ramps97]

Ad me on xbox my gt is xm hacks v4 or xm xex menu

[tezcatli01]

Are you upload a pack of software for JTAG xbox 360 and diagrams please???

Excellent tutorial

[BzM0Dz]

hey rbo wat year is that xbox because my disk tray broke so im looking for a new one an this video madde me wonder cuz i have the exact same xbox 360 white year 2008 so wats the modle on that disk tray thanks

[demonpowerdr]

If you have an updated xbox can you still jtag it?

[TheSexximexxi5]

@demonpowerdr NO sorry :(

[ObsessedWIthGTAIV]

@TheSexximexxi5 - Not true, research Reset Glitch Hack and Team Xecuter CoolRunner, will be out in the next 2 weeks, JTAG ANY XBOX!

Pre-ordered 25 CoolRunner devices if you want your XBOX jtagged let me know!

[joshuajones2011]

hey i need your help i want to start or try to jtag an xbox360 can you help me out?

[MuGuFuTsu]

do this work on jasper too?

[scoolchang]

REMOVE HEATSINKS!!!!!!!!!!!! is NOT a BAD IDEA. But don't Attempt to do it!!! You will have 3 Redlights!!!

[TheCrippledCat]

@ObsessedWithGTAIV my console is already running the .13599 dashboard , can i still jtag it?

[TheXelian]

what type of motherboard does that xbox have?

[ObsessedWIthGTAIV]

@TheXelian - This is a Falcon motherboard.

[sacapuntas4466]

@ObsessedWIthGTAIV you can just take a regular lpt cable and solder that to the mobo ??? but i don't understand wich wires u should solder and were... so if u can help me out that would be nice of u ?! pls send me an noob frienldy diagram or something.!

one more question, does it matter wich dashboard no you have ? i have an old xbox, from 2007 i think...

Thanks! sorry for (if) bad english :)

[shadow50ify]

@ObsessedWIthGTAIV can I play the recent XGD3 games and the upcoming games

[Brown11Boyzs11]

@obsessedwithGTAIV Where did you get the diagram to make the LPT cable? or do you know of any Tuts to make one?

[KX125rider12]

do you sell jtags? i would be very interested if you did

[ObsessedWIthGTAIV]

@KX125rider12 - Send me a YT Message.

[MuGuFuTsu]

@ObsessedWIthGTAIV do you?

[ITzGIBBINZ13]

@ObsessedWIthGTAIV would you ship a jtag to the UK ?

[xboxmodzhero]

hey what part of canada do u live in

[ObsessedWIthGTAIV]

@xboxmodzhero - I am in the USA in NY but close to Toronto/Ontario.

[xboxmodzhero]

@ObsessedWIthGTAIV ok i wanted to know if you could show how to jtag a xbox in person but i live a 1hour away from you

[ObsessedWIthGTAIV]

@xboxmodzhero - Did you want me to JTAG a XBOX for you or just show you how to do it?

[xboxmodzhero]

@ObsessedWIthGTAIV how to do it

[ObsessedWIthGTAIV]

@BzRKxKILLER - Give Xellous a try, if not, try Xell, if not, you will have to use a different wiring method. Sometimes the transistor method will not work, especially on falcons.

Give the "original" a shot, DB1F1 and ROL (Bottom of board). Be careful with DB1F1, clean it with a scratch pen first at an angle, then add solder, then solder your wire.

DO NOT SOLDER THE DIODE DIRECTLY TO DB1F1!!!

[NayrM16]

why do you need an lpt cable



[ObsessedWIthGTAIV]

@NayrM16 - You need the LPT cable to read the NAND on the XBOX. You can also use the NAND-X from Team Xecuter which is a lot faster.

[brownce1990]

im trying to change my video card where is it located?

[ObsessedWIthGTAIV]

@brownce1990 - Oh boy

[ObsessedWIthGTAIV]

Don't know why anyone would be worried about the MS warranty. This is a JTAG tutorial, stop the MS warranty talk!

Nobody cares about the MS warranty, especially when we are talking about JTAG's!

[xXQiKsOpz4LiFeXx]

the X clamps were so simple to get it took me 10 seconds

[52779able]

theres a way 2 open the xbox without breaking the warrenty seal and its not the hair dryer way. the way i found 2 work is to just leave the sticker there and when u seperate the 2 parts the sticker will just slid off of the other part and not leave the void thing on the case

[ObsessedWIthGTAIV]

@52779able - Does it really matter with a JTAG? It's like like your going to send it in to get updated......

[52779able]

@ObsessedWIthGTAIV no but like with a normal xbox thats nots jtaged u can do what ev and trick microsoft

[THisIsBLuurr]

@52779able Whats the point? You ruined the warrenty as soon as you solder that first wire\resistor\diode.

[52779able]

@THisIsBLuurr look at my last reply

[thenonamekid08]

microsoft makes the stuff complicated for us unlike sony. all i needed was a flat head and i got every screw out of the ps3 fat to fix ylod. and hacked it with a usb flash drive and a usb chipset lol

sony suckss

[plasmar1]

as explained airflow and noise diff(possibly dust too).... if you notice the metal mesh and the plastic mesh are staggered/unaligned. xenon heat up alot and unless your gonna water cool it, the name of the game is implement a bunch of small changes and each thing helps a little to avoid the next rrod:P

[ObsessedWIthGTAIV]

@plasmar1 - Not sure what you mean by "the next rrod". With a proper reflow, x-clamp replacement, and good air flow a Xenon will last. I have repaired many that are still going. They just need good heatsink pressure and the gpu heatsink upgraded to gen2 with a 12v fan mod on at least the gpu fan.

[plasmar1]

tip to speed things up, instead of using the opening tool to open the casing(after taking the sides off) just spread casing and it will come apart;P ; as violent as it may seem I have yet to break a case that way

[ObsessedWIthGTAIV]

@plasmar1 -REALLY?

[plasmar1]

@ObsessedWIthGTAIV yep.... other tips, duct over the grill of the gpu using aluminum duct work tape(especially if dvd drive is liteon; they leave gaps), this forces air through the grill(some people use cardboard from a cereal box; I wouldn't).... if it doesn't have thermal pads on the bottom video ram chips, add them to avoid future issues(avail on ebay in sheets; grey crap).. on xenons do 12v mod and cut the metal grill on the back of inner casing(better air flow, less noise)...

[ObsessedWIthGTAIV]

@plasmar1 - I was being sarcastic.... BTW you use foil tape on the heatsinks/fan schroud not duct tape. No need for k-pads on Falcon V3 or later as there are no chips to hold. I do 12v fan mod on GPU fan on all XBOX's I work on and apply micro heatsinks on the TSOP and SouthBridge chips. Would never cut the XBOX chassis, that is unprofessional and cutting the grills out would weaken the chassis.

[plasmar1]

@ObsessedWIthGTAIV cutting the chassis, if done right does little to no diff to how strong it is;P your not cutting the whole section out just the grill(not to mention the plastic outter casing is what actually does the most when its closed up).... I meant as in air duct work, that the aluminum shit is used for mostly; personly I use copper circuit trace fixing tape;P.... not as in "The Red Green Show" :P...

[ObsessedWIthGTAIV]

@plasmar1 - I use $20 a roll Foil Tape which is generally used on A/C ducts. Never cut anything, I can't see that doing anything significant to warrant the time/cost to cut out the grill "mesh".

[HuntForAnswers]

can you make a tut using a nand x, or a nand flasher? lpt connecters are soooo slow and i need help installing the other newer products

[ObsessedWIthGTAIV]

@HuntForAnswers - Yeah, I actually ordered a NANDX, didn't think I would be doing so many JTAG"s. However the only difference is selecting LPT/USB in JTAG Tool.

[ObsessedWIthGTAIV]

@CKXBX - I don't have any Jaspers, they are hard to find but I can get working sealed units. It would come to about $600 for a 512 Jasper, JTAG Wiring, Refurb process, 1TB XBOX Hard Drive, and full configuration.

I can also get brand new in sealed box Zyphers and Falcons. These units are brand new, and would probably last forever once fitted with the proper hardware and setup.

I have Falcons and Zyphers available right now.

[consolemodder92]

Why did you remove the X-Clamps and heatsinks to do this? You can solder the SPI wiring without having to remove anything (maybe just the fan shroud but that's it).

[ObsessedWIthGTAIV]

@consolemodder92 - If you watch the whole tutorial and all 5 videos you will see why. This isn't just a LPT Soldering video.....