Skateboarding Tricks & Maintenance : How to Remove Bearings From a Skateboard

[rednut416]

woops

i just put new wheels onand threw the washers away what happens with out them?

[mjjiconproductions]

it really works

[PENGUiNLAUFBOXX]

what does the otherside of that tool do ?

[yourmomisaguy118]

@PENGUiNLAUFBOXX rethreads the axle.. i know because i have the same one as him

[JoeHazAnXbox]

i always get unit T-tools

[2coofosu]

um I just used a screwdriver...

[XDeathRaze777X]

Federal Trade Commission???

[KyleFucking]

FTC FTW!

[crispysk8er]

man you gotta be strong to be do this :P

[TheGuanajuatoKid]

i have a question, and i hope someone could answer it

i bought me a skateboard about 2 months ago and it felt smooth when i was riding it and now it feels slower and less smoother, do i actually need to clean forcefully my bearings?

[5Five5BlankLegacies]

@TheGuanajuatoKid Hey bro, same thing err. What you wanna do is get new bearings, I recconmend Bones, which are $49.99 or if you wanna go cheaper, Spit Fire for $9.99, they both work the same, but Bones last longer. They're mad chill and go fast. Good luck, happy skating!

[TheGuanajuatoKid]

@5Five5BlankLegacies thanks and happy skating day to you too

[xxAlexLoves182xx]

@5Five5BlankLegacies bones reds for 50 bucks? you must be kidding me

[bluesfanchad]

i got mine for $20 bucks

[AllMyLoveToYouBabe]

@bluesfanchad - really? thats much

[5Five5BlankLegacies]

@xxAlexLoves182xx 

[3cHoPr0dUcTi0nZz]

@xxAlexLoves182xx

got mine for £12.50

[CrazyAwsumScreamoEmo]

@TheGuanajuatoKid well, if youve been riding in the rain or in too many puddles thats a very bad thing to do. Also never use WD-40 for bearing maintenance. i wouldn't reccommend spending the many to buy new bearings after only two months. I have had a board for a year and the bearings are still fine. Yes the quality will decrease but unless you're absolutely loaded with cash, it can wait. Daily or even Weekly maintenance isnt neccesary but if your bearings really are shit, just clean them out

[CrazyAwsumScreamoEmo]

@TheGuanajuatoKid with some high quality cleaner of your choice, and put a bearing lubricant in them, possible bones spead cream or Tri flow lubricant. I hope this helps you, feel free to message me.

[NBTgaming]

i have the same tool :)

[CrazyAwsumScreamoEmo]

@NBTgaming cool story bro :)

[NBTgaming]

@CrazyAwsumScreamoEmo u jelly?

[CrazyAwsumScreamoEmo]

@NBTgaming yeah i'll admit its a rad tool :)

[NBTgaming]

@CrazyAwsumScreamoEmo :)

[SweSk8ter]

MY BEARRING IS FCKING STUCK IN THE WHEEL!

[KonecTRaGe]

idk knowabout u guys...but this iis one of the only Expert Village vids that is helpful

[koolkattech]

What type of deck is that?

[0nRadar]

I always lose the washers :(

[TheBassistdrummer]

how do i get rusted bearings out of a wheel?

[Mysticsayajin]

thx



[Sencess]

I have a feeling that by putting that much weight on only the inner ring of the bearing will have a negative impact in its function :S does anyone agree?

btw Im not from an english speaking country, but I hope I made myself understood

[Sencess]

@Sencess ... or does anyone NOT agree? and in that case explain why

[TheDaveSk8CooL]

it helped thx!!

[damon10406]

will my bearings bbend if i try to take them off like that?

[Nibblies13]

thanks helped heaps <3 you... no homo

[alvinsaelee]

my bearings are rusted onto my trucks, what should i do?

[0J1MY]

@alvinsaelee Urinate on them.

[camgla27]

@alvinsaelee get new trucks bearings and wheels

[ladiesmanbiker]

thanks alot, its appreciated

[krazeman30]

why do my bearings have little tubes inside the middle?

[Jordan4139]

@krazeman30 thems spacers

[camgla27]

@krazeman30 there called spacers

[Mkato320]

@masteruploader1998 don't get a complete find ur custom, even tho its expensive it lasts long

[Trubshort]

cheers dude :) :) Realy hard on enuff refreshers tho!! what whells are they??

[KODB123]

or just remove your trucks do the same thing just use your foot

[planb1532190]

One question, are having the washers on the wheel important? Or is it okay if you didn't have them on.

[77skaterboy]

haha he said NUTT

[goldnf0]

doesnt work retard

[JustSomeRandomNewb]

@goldnf0 I quote: "this doesn't work with all types of wheels"

Next time you cal people retards; look at yourself first. 

[MasterofHeldburg]

Very good Video!It helps me Very!Thank you!

[masteruploader1998]

OMG! i bough a walmart skateboard and i tried to take off the bearings and they are so tuff!! its impossible! dotn buy walmart skateboards ! im gonna make a real one in summer

[pittshnogle]

@masteruploader1998 never, i repeat never buy a skateboard from walmart. go the extra mile and get a blank complete from your local shop if anything

[Swearer1357]

OMFG the tool for the bearing broke off when i was trying to take the bearing off

[Swearer1357]

why the hell is my red bone bearings so hard to take off reallyeven with the tool?

[Snickerbockers]

i dont have a skate tool but yet i still got them out with muh fingers!

[shezymac]

i notice u have venture trucks i switch mines for thunders lmao

[shezymac]

is tht his favorite skateboard but thnks for tha tip

[brazilianEYEreportU]

smoke weed err'day

[nabstriker240]

Can you use a screw driver?

[christianjjj]

why would u take the beareings out anyway tho ? please reply

[KobeBryant322016]

@christianjjj you would take the baring out so you can put on new barins

[sniperpoe7]

@christianjjj new wheels......

[NintendoDSVampire]

@christianjjj To clean them -_-.

[redfall31]

didnt work for me it wont pop off

[slayzermclovin]

ive been doing this shit for years!!

[nintendosk8erboi]

i have the same trucks lol

[relyanddefy]

when reattaching the wheels should you loosen the nut enough so the wheel moves with some spin or just have it move around once or so and skate it off?

[Almosteasyese]

@relyanddefy Tighten it up as far as it goes, that makes sure the bearing wont pop loosew when you skate, then loose it up to your preference. personaly i hate wiggle. i'd say just give it enough room for a good spin and leave it.

[crazyman1639]

yeah i just fucking broke mine doing that thanks alot now i have to go get new $30 bearings again thanks

[SkateBonJ]

@crazyman1639 HAHA

[TheHeroBadillo]

does it matter how u put the bearings in is there one thats supposed to be in front or in the back???????

[darkshadow99910]

What was that red tool he used plz tell me.

[SkateBonJ]

@darkshadow99910 REFLEX UTILITY TOOL

[skateboardsandstuff7]

is it ok to skate with out the bearing shields?

[thefreak809]

@skateboardsandstuff7 yah just never skate with out the bearing cage

[LazyDuckable]

is it easier just buying a reflex utility tool or just doing it with trucks. personally i wouldnt really want to break my trucks doing it that way so?

[lellendo]

i want that key

[websurfer955]

when i took my bearings out a small little piecce came out, its like a tiny pipe. Whats it for?

[chrisunderscorealton]

...now how do I remove the outer case of a popped bearing?

I'm looking for something easier than prising it out with a screwdriver.

[websurfer955]

@chrisunderscorealton u use a small razor blade. it says so in his other vid

[chrisunderscorealton]

@websurfer955 ...there are nearly 140,000 other videos.

[spacegamer99]

yo thanks man

[killersushi99]

Qestion. How many remove your bearings videos can YouTube handle? Theres like a zillion. Some are in spanish! I think I'll post up a how to tighten your trucks video. Call me a pioneer.

[ironmaiden666kane]

sick skate key

[xXpratoseXx]

my bearings blew apart when i was skateboarding xD

[SorasFan1]

@xXpratoseXx

[ginywiny]

where is ur skate school?

[ValentinoDent]

You legend!! ive been thinking of ways to do this for ages

[s5sprite]

Ty Im putting them in alcohol so it eats away the gooky dirt and mud and dried on stuff.After im using bones speed cream.

[mrdomaw]

U r such a ledgand!!! thankyou this worked! + u look cool

[Dreskiff23]

I have that tool :D

[cksh8984]

never seen a tool like that before gotta get me one

[uoTKz]

whats a rethreader?

[skaterforchrist55]

unit is a good tool for its price i have one

[robbiegeorge94]

good vid thanks

[branman57]

stripped my axle

[Private321]

whats a good skate tool?

[101Leinad]

Unit skate tool

[HelloImMatt181]

@Private321 then get the reflex tool...thats what the rethreader is for....at zumiez its only like $20.00. I have 1 its really nice

[ExtremeSkater5]

the washer came out but can i put it back on?

[rashno99]

my bearings popped and now the rim off the bearing is stuck in the wheel and i cant remove it D :

[iSniipE]

would taking off the shield for reds do anthing bad?

[cjguth3]

no. I just got reds and it says that you can

[skechyseth]

i eat my washers -_-

[blink182fan911]

what does rethread mean?

[alienwrkshopsk8r1234]

rethread ur bolts

[MrDorkyPants]

I cant find the video i want!

I want to know:How to take out trucks from your skateboard .

cuss im getting a new board but keeping the same trucks,bearings,and wheels.

[TeamC00L]

just take the bolts off of where it is attached to the deck

[laget1995]

haha :) taking trucks off is really easy... alll you have to do is... un screw the screws on top of your board, take all 4 of them out and then do the other 4 on the other truck... thats all you have to do hah

[romagosk]

i hate snapping my board. just unscrew the four screws on top while holding the bolts underneath

[happyskateposer]

i say what what in the butt

[Hbills1243]

yo i have bones 100s and there mad easy to put in and take out bearings but then i got bones stfs and its sooo hard to put my bearings in

[flojh]

spitfire wheels are hard for getting bearings in and out of

[408est]

i know how to turn mini logos in to super swiss in less then 5 mins

[rockobeee]

you could also just put the whole board on its side and press in the bearing to put one in instead of getting that tool

[flojh]

but that tool saves you buying new trucks because it has an axle rethreader

[cde201]

Thanks man. Great help!

[AzNxBen1234]

why the fuck my skateboard wheel goes slow and my bearings are speed demons are reds speed demons bearing suck and my hardwares is alway stuck close to my bearings what should i do?

[Hbills1243]

loosin it

[manervic]

you sure there the rite size bearings?

[ShecklerSk8board]

The bones swiss aren't the only good bearings. I got spitfire and they work pretty good.

[Hbills1243]

bones reds r the way to go

[erjd12]

hells yeah

[jonaskates12ahh]

thx

[casparsk8core]

he also could shout "buy the f**kin alien workshop-tool!"

[mitchy204]

Help someone said that you could use screwdrive so now 1 bearing is broken but the outside of the bearing is still inside what should i do?

[408est]

OH!!!!!!!so thats how you do it......

how much are swissbone?

[jc108]

its bones swiss...

and tehre £55

[davidb619]

there like 50$

they cost a fucking lot

[AzNxBen1234]

dude in canada THEY COST 80$ u american are lucky bitch

[polizutube]

i can get some for 20

[Eclipse11295]

dude bone swisses are good but save 40$ and get bone reds i have them they r like the same and made by bone

[sloppyjk]

will any washes or anything small fall our? plz reply some 1

[spunkafilipinoatana]

i do

[cuzz467]

are arbor longboard good

[rainingcow]

mine are not coming out

[stonesku11]

two things,

1. if u rode ure board in the rain or got the bearings wet, ure screwed cuz getting rusty bearings out suck, its possible to get out but its no fun

2. if u cant do it ureself, ask ure parents or go to ure local skate shop to help pop it out, usually theyre nice enough to help u.

[Hydragurum]

Nahh nahh... Using that tool to remove bearings is murder on the hands... I tried with that exact same tool. I'll try using the truck itself... but it seems really difficult.

[javy8494]

u dnt hav to brag that ur sponsored

[earthings]

skate and stay away from drugs!

peace!

[ajluvssk8s]

@earthings he look like hunter burgan from AFI

[xbenton10]

damn that faggot or bitch says i am a sponsered skater too much

[BowWayne2008]

@xbenton10 he says it TWICE for your information

[jackrockz321]

should ur wheels be skweaking??

[WaterWorkzz]

its normal

[BuiltRetarded]

ya my wheels are rictas brand neew and they are sqeaking =/ is it normal?

[jackrockz321]

idk....... but i dont think so

[4444johnnyboy4444]

dude they're urethane they're supposed to squeak lol

[BuiltRetarded]

no theyre not dumbass, ive been skating for 8 years and these are my first wheels to squeak. I know my stuff, fuck you.

[4444johnnyboy4444]

suck my rictas you amature XD

[BuiltRetarded]

i am ryan sheckler u fag,

i love to cry and skate.

YOU AMATURE!

[4444johnnyboy4444]

lmao to tell you the truth you should switch to bones bearings

they're pretty bad ass...i had them on my board for about a year nd i only serviced them once...talk about endurance dude

fuck rictas lol xD

[BuiltRetarded]

are you fucking stupid?

bones are BEARINGS, rictas are WHEELS.

Your fuckin retarded.

[4444johnnyboy4444]

lol you never heard about ricta rapidos??

skating for 8 years my ass xD

[BuiltRetarded]

ive been skating since i was 5 faggot.

thats why im 100x better than youll ever be.

[4444johnnyboy4444]

you have no idea.

whats your best trick then??

[BuiltRetarded]

nollie big heel.

you faggot?

[4444johnnyboy4444]

lol y cant we just get along lol

i could nollie flip to nose manual

lately im trying to nollie flip to nosegrind but its not going well :l

nollie big heel, nice

[ericlam2728]

i've been sakting for 1 week and had no idea waht a bearing was till a day a ago when my freind told me that i was good but my bearings were crap so i had to push ever second cuz my wheels would spin for like 1 second xD

[kathman123]

lol, way to totally change the conversation

[MikhailFutebol]

Ye me 2 but best move i can do is a heel-flip/kickflip but w.e...

[davethefreindly]

no that means ur cage broke or u need new barrings

[MagnoliaSoulja504]

im glad we can all count this is good. stay in school guys

JUST SAY NO

[davidlamothe]

7th

[yomamafatandwide16]

6th

[sunsun23crab]

5th

[djspitdr]

4th lol

[RSmovieshere]

3rd

[davide013096]

2ND

[SkateTheWorld1170]

whoo! 1st to comment