HHO generator. First tries and tests

[b101aa2]

for being a wet cell, this is actually pretty darn good.

[xeonic2]

1 hp = 746 watts. I saw 12.5 volts and 31 amps. So you pulled 387.5 watts from the power supply. So your HHO cell give at the best 1/2HP every seconds if it is 100% efficient (witch is impossible).

[flotechhho]

I love this cell. But you are creating too much of a voltage drop by using neutral plates in addition to the seperated cells. You can configure it like +-+-+ and due to the seperated cells you will get your voltage drop so will be running at 2 volts per cell at 12 volts or hooked to a running car that operates at 13.8 volts you will be at 2.3 volts per cell.

[oulikethat]

how much can i get one for...

[emanuelmartin123]

what is the material of plates?

[zuseable]

verey nice hay did you now dc motors when spun by hand make energey just like a genarator all of them do add it to your pully system or what ever go check out wind power dc motors youtube delve in to other fields like i do take the best of there tec and blend it steam power wind hydro power solar termaul trancfer elictronics ther is a way to make each beter by blending but you got to stop thinking same as every one else exsploer were they didnt sven a littelm thing mite help you with a problem

[MichaelCouch]

Most spark arrestor can not stop HHO from flashing back, use bubblers for your own safety.

[NEON271156]

thats strange, i have just finnished building one very similar to this, tho im awaiting bits for my plates before i can test it out,,,, cool.

thom in scotland.

[TopGunMan]

um, rape?

[noimw]

HHO generator produces about 7.65 Horespower worth of Hydrogen.... every minute.

So assuming the generator draws 10amps at 14.4v = 144watts or 11.6 HP every minute...... I just proved with simple math it requires more HP to make the Hydrogen than you get back from the combustion of the hydrogen

[Jetijs]

So?

And what about oxygen, that is also produced? This gives the gas whole new range of properties. And since when 144 watts are 11.6HP?

[noimw]

What is the use.

It is your Time & Money, Waste it however you want.

[whiterican74]

1hp = 745.699872 watts, So if he was getting 11.6 hp off 144 watts, I would ask how. not try to damn him..

[hhoguru232004]

really nice work

[Sumermagor]

5 stars, nice clear work well done! how many volts do you put in?

[larry111069]

Great cell

[1freedomfighter1]

Great work. I doubled my fuel mileage running a negatively charged cell, only 4 minutes 3 or 4 times a day of 12 volt 2 amp current. lol due some weight tests of your cathode when you get some white powder build up on it. Put on scales and heat it up slowly with a torch :) it will lose weight and gain it back when cooling, proving we are dealing with a new energy field. my cathode was 422 grams and it lost 13 grams then gained it back :), pm me if you have any questions.

[fafadi13]

Its how this device that manipulated

[tazpete]

Great HHO output ---- How many plates,size, plate spacing, and amps drawn on this video?

Very impressed to what appears 2 liters a minute

[lApEkv2l]

cool cell and simple setup

[bennytan777]

From your video,

this is a 5 series cell, not 6. Correct?

[Jetijs]

No, this is in fact a 6 series cell electrolyzer.

[durangotrkrt]

How much did a setup like that cost to make?

[satchelmcqueen1]

just today ive made 2 cells as they are my first. the first was out of 2 crap metal plumbing pipes set inside each other with P and N connected to each. Got some good results, was surprised. next one is made of 12 aluminum plates interwoven P and Neg every other one. will try it out tommorow. is there a site that explains in more detail with pics about the P and Neg placement and or configuration? thanks. BTW ill post some vids of my attempts tommorow as Im filming it all.

[RokSrakaCar]

how did you make the torch tip?

[fireicer]

very good production. its down to the space between the cells and just a point you have to get and keep a presure of about 30psi per cylinder in a car to run it. dont sound much but a V6 thats 30x6 so your flow rate is very high you are to produce this so there is aa long way to go with this cell design. carbon graphite anodes do produce massive amounts of hho to run a engine from water but due to carbon anodes it combines with oxygen to produce carbon monoxide oops.

[carrierpilot1357]

the noise from the bubbler was cool.

[PeNkNiFeLoVeLiVe]

very nice

i know ur gonna help the world someday :)

[Leftwings22]

Impressive build, impressive work. That bubbler is a neat sight.

Keep up the outstanding fabrication!

Lefty

[SmartScarecrow]

very impressive piece of work ... fine quality fabrication ... mine looks like a 6th grade science fair project ...

[Jetijs]

Hi gmeatdaddy,

Some parts of my attraction motor is now being made by professionals, so it takes some time, but I am working on it and it is my project number one. I will keep you updated in the energeticforum :)

[gmeatdaddy]

Hi Jetijs,

Man!,You must have a twin brother or something because you seem to pop out alot of nice work LOL.Any progress being made with the attraction motor? as I cant wait to see results from that.thx for the hard work instead of just rusting away.

-gmeatdaddy

[rc9340]

Very sweet build!

[Jetijs]

Thanks guys :)

At this time I do not care about the efficiency of the gas production, I just want to make a HHO torch and test it. Also I will increase the electrolyte level to get more amps through the cell at lower volts. The best would be if I could get about 20-30amps through the cell at 12V, that would give a little less than 2v for each section and that is all the voltage it needs. Every volt above 2V is just wasted energy in heat.

Thanks

[tvryb]

don't forget that the distance between your plates also dictates current draw. Also the stainless steel itself poses a resistance that must be overcome with voltage

so the electrolyte bath may be running at peak efficiency, but because of the steel's resistance the cell as a whole runs slightly below.

AMAZING BUILD btw!!!!!!!!!

I like the acrylic bubbler

[rewindyourpants]

so your saying you should have 6 cells at 12 volts?

what is the purpose of separating the cells?

[Jetijs]

If you have 6 cells in series and feed 12v in them, then each cell will get a little less than 2V. This is all the cell needs to generate the HHO efficient. Because voltages higher than 1.24V just go to heat and is wasted. There is no difference if you put 2v and 2a through the cell, or 2000v and 2a, the gas production will be the same.

[rewindyourpants]

whats the highest amount of plates per cell you recommend?

[Jetijs]

it is really up to you. The more plates per section, the higher the surface area, amp draw and more gas. Also the box gets bigger if you use more plates. Minimum should be 3 - inner negative plate and outer positive plates, so that the gas can from from both negative plate sides :)

[rewindyourpants]

is it necessary to have the cells separated to achieve 2 volt per cell?

[phakincrazy]

if you are putting in approx 2 volts into each section (cell) of your electrolyzer, and you have neutral plates in each cell, you are dropping your voltage in each cell even more, possibly below your target 1.24. i would test your voltage between your plates in any cell and see what you come up with, just a thought.

[m3sca1]

wow-looks like a lead acid battery!How many volts do get across the terminals after you switch off?

[pi3573]

lets us know what your production rates are plz, watch you temps though acrylic,lucite,ect. can become maliable at about 150 F be safe:]

[h2opower]

Now that's well built:) Keep up the great work.

[marthale7]

Very professional as always dude! Great work!

[sirHOAX]

Excellent build. Starting to observe this same key-fact for good HHO-Cell design. Separate chambers for well maintained voltage conduction. Goes back to that true-series-cell.

Again, nice work.. Regards, --S