hi um i did this and tailwhips and things muck up the side of the griptape and it peels off at the edges! had to re grip it so that the grip tape was smaller than the deck... :(
@jaydenjayden09 best thing to do is to heat up the old grip with a heat gun or maybe your mums old hairdryer. This will melt the glue and it should peel off much easier
The shop is called Skatebiz but we have a section called scooterbiz. It is at 101 Albert Street in the CBD, come and chat to the guys there, they are super helpfull.
Without a stanley knife you would struggle to get a nice clean cut, remember to be careful though.
Yep sure is.. And watch any skateboarder or go into any skateboard shop and watch them cut grip...THEY ALL CUT TOWARDS THEMSELVES!! JUST BE CAREFUL!! Just do it slow and neat, You will never get your grip right if you cut away from yourself because your hand cant bend properly that way. But if you feel safer doing it that way then by all means do it.
hi i have a jdbug pro and im gettining new griptape (not cut) it has a triange at the front help!
Mr12luke 2 months ago
Thanks this helped loads
cooldude344100 2 months ago
Thanks this helped loads
cooldude344100 2 months ago
can you use a regular knife, if so can you use your mothers kitchen knife or anything Thanks
-Paul
PaulTheVlogger 4 months ago
perfect
trichauster 4 months ago
Nice vid :)
SN1PERGODZ 4 months ago
LOL! Has anyone seen him fart a around 2:55?
AussieMusiic 5 months ago
hahaha yes i want to cut towards myself lmao
wesdyck19 6 months ago
you can put the grip tape that your left with at the end for the front i tried it and it actully works
LOL!
GR1MREAPER8965 6 months ago
hi um i did this and tailwhips and things muck up the side of the griptape and it peels off at the edges! had to re grip it so that the grip tape was smaller than the deck... :(
poizonandwater99 6 months ago
what abote the front ?
GR1MREAPER8965 6 months ago
is it easier to take off the back wheel/doin it ?
GooberTurtle 6 months ago
@GooberTurtle yep, heaps easier
Rudikills 6 months ago
Can you put the break bit on at the same time as the big deck bit ? So like do it all at once so it leaves no gaps ????
09kbeautyman 7 months ago
u buy griptape at a skate shop dummy and if thers nun der go un ebay
BlakGuyWFriedChicken 8 months ago
How Do You Take the Grip Off At The Start
jaydenjayden09 8 months ago
@jaydenjayden09 best thing to do is to heat up the old grip with a heat gun or maybe your mums old hairdryer. This will melt the glue and it should peel off much easier
Rudikills 8 months ago
for scooter tutorials come to scooteraddict11!!!!!! :-)
scooteraddict11 9 months ago
where do u buy grip tape?
Legomainia2437 9 months ago
@Legomainia2437 you can buy it at scooterbiz
Rudikills 9 months ago
@Legomainia2437 or ur local skateshop.
xPinoyHDx 8 months ago
@Legomainia2437 Dont buy at scooterbiz buy from ebay it cost £7 and i have some from there it has lasted for the past 7 months and it still has grip
PS3Moniter 7 months ago
what about the front part?, can you put grip tape on that???
500ChumpSticks 10 months ago
@500ChumpSticks for sure, you just need some more grip. Sometimes you will end up with off cuts so you could use them?
Rudikills 9 months ago
u are a emo cut your rist
harrymad11 10 months ago
Good tut, but you should always cut away from yourself.
skatejake7 11 months ago
NEVER CUT TOWARDS UR SELF!!!!!!!!!
adamwoodbac 11 months ago
arent u a skaterborder becuz i saw u in da skatebord place
badboyhuy 11 months ago
hey would it be possible if you could hook me up with a scooter by anychance? sick of rideing razors and them snapping:/
austinirvin 1 year ago
can i use skateboard griptape
kuffednugget 1 year ago
@kuffednugget Sure can mate. Usually the black skateboard grip is better and will last longer
Rudikills 1 year ago
2:42 epic fail XD
pug0525 1 year ago
@pug0525 where was the "epic fail"?
Rudikills 1 year ago 10
@Rudikills you never cut towards your self what would happen if the knife sliped 8)
pug0525 1 year ago
@Rudikills i think he ment the sentence " cut your self."
xPinoyHDx 10 months ago
Not perfect, but if you never done it before its a good tutorial, I find it a lot nicer if you take the wheel and brake off and make it 1 piece.
175myles 1 year ago
dude i always got taught to cut away from myself but nice tutorial :D
nickjveitch 1 year ago
you should NEVER cut towards you! incase you slip you have a stanley knife in your chest.
IndieSkater123 1 year ago
The shop is called Skatebiz but we have a section called scooterbiz. It is at 101 Albert Street in the CBD, come and chat to the guys there, they are super helpfull.
Without a stanley knife you would struggle to get a nice clean cut, remember to be careful though.
Rudikills 1 year ago
does it matter much if you dont use a stanley knife ??
TimothyLee68 1 year ago
@TimothyLee68 yeah if you use scissors or something else you won't get a clean cut
scorpi0nking9o0 1 year ago
wheres in brisbane is the shop your in? and it sells scooter parts right?
VoiD1x 1 year ago
may i plese have that scooter it is lying around
sk8er9721 1 year ago
@sk8er9721 Man if its still lying around at Skatebiz Brisbane you can have it! Not sure if its still there though...
Rudikills 1 year ago
@Rudikills i liv in brisbane
badboyhuy 1 year ago
nicely done dude
chanerocks191 1 year ago
nice vid helped a lot.... good jod=) but bikeracer28 is right never cut towards urself
TheSauerpower11 1 year ago
thank you
dabbisabbi100 1 year ago
I thought you were suppost to cut away from yourself?
arandomthot5 1 year ago
i just griped over the razor oval grip.lol
MrMxrider4 1 year ago
nahh im just messing with ya good job but u stuffed up at the end
TarQuinWitNey 1 year ago
MY SON CUT HIS WRISTS OPEN CUTTING WITH A STANLEY KNIFE AND I BLAME YOU FOR GIVING HIM THIS STUPID IDEA
TarQuinWitNey 1 year ago
5:05 you just messed up on the very last piece of griptape.
M0M0TH3BEST 1 year ago
@dtf96 Then you are probably EMO
M0M0TH3BEST 1 year ago
waste of grip im sorry but at least grip a welded foly mech scooter i dont think anyone really rides a jd bug with that crappy f-mech
Vansskater39 1 year ago
Thanks man that helped me allot!
917spencer 1 year ago
do you just use skateboard griptape?
cooprox97 1 year ago
how bout take off the back wheel and place the grip down then cut, put the wheel back on and BAM!
bknewborn 1 year ago
wwooww the best tut Ive seen thanks dude
thetacticalchicken00 1 year ago 3
thanks sooo much
ratchet5561 1 year ago
how do you get the grip tape that already cut and everything that goes aroun d the whole deck, like all cut around the eddges and brake?
NP0970 1 year ago
how do u do the mech?
mcrfankifo 1 year ago
Yep sure is.. And watch any skateboarder or go into any skateboard shop and watch them cut grip...THEY ALL CUT TOWARDS THEMSELVES!! JUST BE CAREFUL!! Just do it slow and neat, You will never get your grip right if you cut away from yourself because your hand cant bend properly that way. But if you feel safer doing it that way then by all means do it.
Rudikills 1 year ago
@Rudikills what if i love to cut myself?
dtf96 1 year ago
is scooterbiz in the same building as skatebiz
Spagettileggs 1 year ago
if u cut away it can lift the sheet off the scooters
quackify 2 years ago
Nah, you do that for skateboards as well doesnt come off
bikesaresick 2 years ago
omg u guys should get over urselfs i bet u guys do it to
beanorulz69 2 years ago
you are always ment to cut away from yourself so yuhh dont cut yourself...!
Drum4lLife97 2 years ago
thts true u coult like stabe ur self
ddrummer2323 2 years ago
u never want to cut towards urself
bikeracer28 2 years ago 18
@bikeracer28 if your 5
MacsCanfly 1 year ago 2