What I mean is that I would like to see a video with both plasma globes connected with the same polarity. I am not sure what you mean by bias in the video either but if both globes are connected in the same exact way they should react in the same way to changes in frequency and duty cycle. Once you establish that they are displaying the same reaction then without changing anything else switch the polarity on one and see if there is a difference between the two.
@DougForbes1: please note what you ask has already been shown on Part 5 of my Ruhmkorff serie but with one globe only. You'll see, i change live the FB polarity but I can do for you a specific video with globes per your request. Let me know if Part 5 answer your query otherwise please tell me if you want receive private video (send me your mail) or prefer I publish a specific Part 9 on my channel.
I would like to see both globes operated at the same time with the same bias. If the response is visually the same then the difference we see in the videos is indeed due to the polarity difference and not in some unbalance in the HV coils.
I would like to see a frequency and duty cycle run with both globes connected with the same bias. If the plasmas are the same then the bias would indeed be the difference we see in the part 8 video.
@DougForbes1: please look below my answer to same query (about 8 monthes ago). The forward or reverse bias is controlled by the polarity of the flyback I'm PWm pulsing.
I hope to have understood correctly your intructions.
The left globe is now forward biased, the right one is reverse biased. As you know, easy to do it by only swaping the primary winding pins on the same left isol-fet-driver, same procedure on the right isol-fet-driver.
In doing so, the tendrils are now much thiner & numerous on left globe, the right globe having less plasma tendrils but thicker.
Another way to answer your query: please watch Part 5 between 1:30 and 2:00 moments where i change live forward to reverse bias showing totally different tendrils geometry. Part 5 was done with only one gobe & coil, not so practical because all manual (no software control, using freq generator, low speed mosfet driver as opposed to high speed moseft driver in Part 8,...).
Worthwhile noting Part 8 has a disadvantage due to slight coupling between both globes but still clearly show the phenomae !
hi would you agree on the tesla comment that scalar waves could be projected at objects anywhere as long as the waves matched the resonance of the object and destry it...just intrigued in this theory as tesla was very special from the history of inventors.
yes, Tesla's comment is correct plus it can be expanded to destroy or create. This is why practicing mysticism as yoga, tantra, shaman is really helpful when dealing with ZPE tech. There is a Source of the sources requiring authentic heart where scalar waves are same as Chi except you tap on them via devices instead of human interface. The chakras are in fact ZPE gates ;)
very interesting , I wish i could explain why !! The only thing i can suggest about why it doesnt stop when you lower it from 30% duty is because it has struck the arc and its easier for it to continue . Either way I still dont know why they arnt equal all the time since the voltage potential difference is always equal and opposite in both .. A clever man you are !
About why they are not equal, please read Part 7 where it is due to the fact plasma has an inner diode build in. Not a perfect one as in semiconductor industry but enough diode effect to not let same current forward versus reverse. Since the plasmic diode is also varicap and Gunn type (negative resistor), this will change the overal HV built in LC tank.
The hysteris property is interesting for non-commutative switching electronics hence non-linear oscillators & extended Maxwell equations.
Ok I will watch part 7 in a moment .. I didnt know about a diode effect in plasmas . My knowledge is limited in this but I very much appreciate any bits of information i can glean from here and there ... So i'll be watching and listening closely .. I know there are lots of bogus devices claiming overunity but what do you think about the "ion valve" Is it possible to strip electrons from conductive matter by excitation-decomposition ? Nobody on youtube is trying it ... yet !
To answer your question about "ion valve" tech... I suggest you read Part 1 to Part 7 in order to understand the real nature of Zero Point Energy engineering & mysticism. You see, such tech is not only tech because it deals with experiencing energy beyond space-time and most ZPE experimentators don't care about this so they end up wounding themselves. In other words, it is not only about stripping electrons but mainly about mastering ultra-wide band radio-communications.
Put the top/ back of your head towards the plasma ball - you'll hear their scalar waves via your brain !
z1zaz 1 year ago
You claim hysteresis ?
Surely the discharge is due to the ions generated, which can no longer be sustained as the duty cycle is reduced !!!!
Check out my icon !
z1zaz 1 year ago
@75369874159
@DougForbes1
Please watch my last video "Ruhmkorff coil - Part 9" providing an extensive proof of diode effect or phantom diode effect.
@Tubemp777
Voici la partie 9 que tu attendais impatiemment ;)
selfonlypath 1 year ago
What I mean is that I would like to see a video with both plasma globes connected with the same polarity. I am not sure what you mean by bias in the video either but if both globes are connected in the same exact way they should react in the same way to changes in frequency and duty cycle. Once you establish that they are displaying the same reaction then without changing anything else switch the polarity on one and see if there is a difference between the two.
DougForbes1 1 year ago
@DougForbes1: please note what you ask has already been shown on Part 5 of my Ruhmkorff serie but with one globe only. You'll see, i change live the FB polarity but I can do for you a specific video with globes per your request. Let me know if Part 5 answer your query otherwise please tell me if you want receive private video (send me your mail) or prefer I publish a specific Part 9 on my channel.
selfonlypath 1 year ago
I would like to see both globes operated at the same time with the same bias. If the response is visually the same then the difference we see in the videos is indeed due to the polarity difference and not in some unbalance in the HV coils.
DougForbes1 1 year ago
@DougForbes1: just to make sure I understand perfectly what you want me to try.
What is your precise definition of bias and what method do you want to use for measuring such bias ?
P.S. You can use precise signal processing definition since i'm an electrical engineer.
selfonlypath 1 year ago
I would like to see a frequency and duty cycle run with both globes connected with the same bias. If the plasmas are the same then the bias would indeed be the difference we see in the part 8 video.
DougForbes1 1 year ago
@DougForbes1: please look below my answer to same query (about 8 monthes ago). The forward or reverse bias is controlled by the polarity of the flyback I'm PWm pulsing.
selfonlypath 1 year ago
Looks like you are using good materials for your experiments, what are your conclusions in your research ?, I mean, what you have reach/discovered ?
Thanatermesis 1 year ago
@Thanatermesis: Did you watch all my videos, in particular the Design Rules and Tantratron serie ?
selfonlypath 1 year ago
Please forward bias the left globe and reverse bias the right globe to see if the effect follows the signal. Thx.
75369874159 2 years ago
I hope to have understood correctly your intructions.
The left globe is now forward biased, the right one is reverse biased. As you know, easy to do it by only swaping the primary winding pins on the same left isol-fet-driver, same procedure on the right isol-fet-driver.
In doing so, the tendrils are now much thiner & numerous on left globe, the right globe having less plasma tendrils but thicker.
selfonlypath 2 years ago
Another way to answer your query: please watch Part 5 between 1:30 and 2:00 moments where i change live forward to reverse bias showing totally different tendrils geometry. Part 5 was done with only one gobe & coil, not so practical because all manual (no software control, using freq generator, low speed mosfet driver as opposed to high speed moseft driver in Part 8,...).
Worthwhile noting Part 8 has a disadvantage due to slight coupling between both globes but still clearly show the phenomae !
selfonlypath 2 years ago
hi would you agree on the tesla comment that scalar waves could be projected at objects anywhere as long as the waves matched the resonance of the object and destry it...just intrigued in this theory as tesla was very special from the history of inventors.
honda4004 2 years ago
yes, Tesla's comment is correct plus it can be expanded to destroy or create. This is why practicing mysticism as yoga, tantra, shaman is really helpful when dealing with ZPE tech. There is a Source of the sources requiring authentic heart where scalar waves are same as Chi except you tap on them via devices instead of human interface. The chakras are in fact ZPE gates ;)
selfonlypath 2 years ago
very interesting , I wish i could explain why !! The only thing i can suggest about why it doesnt stop when you lower it from 30% duty is because it has struck the arc and its easier for it to continue . Either way I still dont know why they arnt equal all the time since the voltage potential difference is always equal and opposite in both .. A clever man you are !
ZED74 2 years ago
About why they are not equal, please read Part 7 where it is due to the fact plasma has an inner diode build in. Not a perfect one as in semiconductor industry but enough diode effect to not let same current forward versus reverse. Since the plasmic diode is also varicap and Gunn type (negative resistor), this will change the overal HV built in LC tank.
The hysteris property is interesting for non-commutative switching electronics hence non-linear oscillators & extended Maxwell equations.
selfonlypath 2 years ago
Ok I will watch part 7 in a moment .. I didnt know about a diode effect in plasmas . My knowledge is limited in this but I very much appreciate any bits of information i can glean from here and there ... So i'll be watching and listening closely .. I know there are lots of bogus devices claiming overunity but what do you think about the "ion valve" Is it possible to strip electrons from conductive matter by excitation-decomposition ? Nobody on youtube is trying it ... yet !
ZED74 2 years ago
oh and thankyou !!
ZED74 2 years ago
To answer your question about "ion valve" tech... I suggest you read Part 1 to Part 7 in order to understand the real nature of Zero Point Energy engineering & mysticism. You see, such tech is not only tech because it deals with experiencing energy beyond space-time and most ZPE experimentators don't care about this so they end up wounding themselves. In other words, it is not only about stripping electrons but mainly about mastering ultra-wide band radio-communications.
selfonlypath 2 years ago