I was wondering if you plan on letting us all know your finding as they unfold,like this open forum is meant for or are you going to paten it ? What are the electrical that you have hocked up ?
put new leads (never in KOH) on, and get a NEW container that NEVER held KOH either. And try it. That would eliminate any "residue" theories. Which was my first thought seeing it, hard to clean all the KOH out those containers once in there.
But a NEW container, would eliminate the contaminated container, do the leads and you got it covered
you just showed us two videos with no gas production. changing voltage and frequency. now this video. what are you doing different? give it up. whats going on?
Maby hot water and/or plates can produce more gases. That might also be good for solar systems where the suns energy can be used to heat them up. Though I understand this is perhaps only a secondary concept. I know with electrolyte, that higher temperatures of the water helps, but I'm not sure if it would be the same using just pure water.
I got a little bit better reaction than what you are seeing using a neon sign transformer at 9kv 30ma using the primary of a 110v to 12v "brick" as an inductor and a blocking diode ... but my results were not THAT much better than you are seeing ... and certainly nothing like what Meyer showed ... so the quest continues ... key seems to be to try real hard to blow up a capacitor that happens to have water as the dialectric ...
Contaminates can come from your leads as well if they are not Stainless steel. Also if you have residue from before... VERY hard to get 100% pure water. Very cool test. I like your step at a time approach.
After the last test I pulled the unit. Each test is a step in the right direction... I got the result I was looking for and now I am going on to the next step.. The "FOCUS" does what it needs to do ... about 20% more MPG...
Notice the tiny bubbles are sticking to the steel. If you roughen the plates they should release the gas quicker and it should free up some of the surface area. For a future experiment perhaps. Thanks John
The video is not great... (no time) the plates are really producing more than the camera shows.. (not much but more)... I am on the right track and now I must twice it... (I will).
very kool. I wonder what variables effect this setup. It would be interesting to limit amps to .2-ish and then increase volts under single phase pulse and see where the "sweet spot" is that meyers found. Again very kool and we all appreciate your work.
We hope you keep us up dated! and what kind of electrical ? We would like to know.or are you planing a paten?
beginerhydro 3 years ago
Don't believe so.
John AArons
johnaarons 3 years ago
I was wondering if you plan on letting us all know your finding as they unfold,like this open forum is meant for or are you going to paten it ? What are the electrical that you have hocked up ?
beginerhydro 3 years ago
Thanks you much for the video.
I am giving a guess that the cell conditioned itself chemicaly overnight and has a little conductance.
Or maybe like you said I think some sort of electrical capacitive reaction is going on.
Thanks agian.
Ben.
BasementBen 3 years ago
More data... closer we get.
John AArons
johnaarons 3 years ago
put new leads (never in KOH) on, and get a NEW container that NEVER held KOH either. And try it. That would eliminate any "residue" theories. Which was my first thought seeing it, hard to clean all the KOH out those containers once in there.
But a NEW container, would eliminate the contaminated container, do the leads and you got it covered
moreoverunity 3 years ago
you just showed us two videos with no gas production. changing voltage and frequency. now this video. what are you doing different? give it up. whats going on?
delvis11 3 years ago
I have been waiting for you... you will never get it.... I thank you for your interest..
John AArons
johnaarons 3 years ago
Do you know what frequency you are hitting it with?
RobC1999 3 years ago
Not there yet..
John AArons
johnaarons 3 years ago
Maby hot water and/or plates can produce more gases. That might also be good for solar systems where the suns energy can be used to heat them up. Though I understand this is perhaps only a secondary concept. I know with electrolyte, that higher temperatures of the water helps, but I'm not sure if it would be the same using just pure water.
trailkeeper 3 years ago
I am looking at adding some electrolyte...
Keep watching..
John AArons
johnaarons 3 years ago
I hope you are on to something...
pat1huey 3 years ago
I got a little bit better reaction than what you are seeing using a neon sign transformer at 9kv 30ma using the primary of a 110v to 12v "brick" as an inductor and a blocking diode ... but my results were not THAT much better than you are seeing ... and certainly nothing like what Meyer showed ... so the quest continues ... key seems to be to try real hard to blow up a capacitor that happens to have water as the dialectric ...
SmartScarecrow 3 years ago
I think you are missing the point... It is not just the voltage...
Keep watching
John AArons
johnaarons 3 years ago
Contaminates can come from your leads as well if they are not Stainless steel. Also if you have residue from before... VERY hard to get 100% pure water. Very cool test. I like your step at a time approach.
marthale7 3 years ago
I do not believe that is it... we will see.. Keep watching.
John AArons
johnaarons 3 years ago
Notice you have not posted gas mileage in the Honda for awhile. Just curious what type of gas mileage you are getting with you hydrogen booster.
MCAControl 3 years ago
After the last test I pulled the unit. Each test is a step in the right direction... I got the result I was looking for and now I am going on to the next step.. The "FOCUS" does what it needs to do ... about 20% more MPG...
John AArons
johnaarons 3 years ago
Notice the tiny bubbles are sticking to the steel. If you roughen the plates they should release the gas quicker and it should free up some of the surface area. For a future experiment perhaps. Thanks John
gonjokie 3 years ago
The video is not great... (no time) the plates are really producing more than the camera shows.. (not much but more)... I am on the right track and now I must twice it... (I will).
John AArons
johnaarons 3 years ago
whooooo hooooo way too go John. Awesome job you are really on too something!!!!!! I am really excited for you as all should be.
asiaollie 3 years ago
We are getting close... there are some electronics that you can't see here... but I believe I (we) are about 2 mths away..
Keep watching
John AArons
johnaarons 3 years ago
very kool. I wonder what variables effect this setup. It would be interesting to limit amps to .2-ish and then increase volts under single phase pulse and see where the "sweet spot" is that meyers found. Again very kool and we all appreciate your work.
hydojenk 3 years ago