Bad tip at end! Storing the used belt under the driver seat can cause it to move forward in contact with feat and pedals. Just like getting your beer bottle caught under your brake... Oooops! LOL
They talk to us like we're idiots because some people dont use common sense.... and then you'll get some of the above mentioned people who are pissed because they left their engine running whilst trying to replace a belt.
is serpentine belt the same as the power steering belt?? i was told my power steering belt needs to be adjusted but if this is the same thing i know my serpenting belt has not been replaced in several years so i reckon ill just replace it instead of just having it adjusted
@carautoparts123 Usually just listening to your car as you drive, a whistling or squealing as you either start up or drive is a pretty good indicator.
my belt slipped off while on my way home from work, as I am a woman and have no one to help me , this video has been most informative. Thank you so very much.
Not all cars have a self tensioning pulley., especially the ones that have separate belts for alternators, ac, and water pumps. You must check a repair manual for you specific car
my belt in my 97 250 vortec silverado just snapped earlier today. all day today, upon startup it would make a wierd noise n graduly fade, then on my way home it was making a whipping noise then it stopped and started to smell like burnt rubber. then my truck had a hard time running after that, i shut it off and pulled the snapped belt out. what causes a rubber coated copper insulated serpentine belt to snap at low rpm? how do i chck for seized pulleys? shud they all b easy to turn by hand?
the belt on my 99 taurus doesnt seem to come off so easily, its pissing me off i loosen the bolt on the belt tensioner pulley and the belt doesnt come loose that easily its really frusturating
just changed a serpentine belt on a 2002 jeep Cherokee Laredo and this video helped out alot. thanks!
joedangle 7 hours ago
Bad tip at end! Storing the used belt under the driver seat can cause it to move forward in contact with feat and pedals. Just like getting your beer bottle caught under your brake... Oooops! LOL
gunblade197 1 month ago
Very useful video, removed some doubts
HananEafergan 2 months ago
They talk to us like we're idiots because some people dont use common sense.... and then you'll get some of the above mentioned people who are pissed because they left their engine running whilst trying to replace a belt.
SkankingJesus 4 months ago
@moni370 haha isnt that why your here
hmfuku12 4 months ago
The best tutorial I've seen. Thank you! One note, my Subaru Outback tensioner moves in the opposite direction as shown in the video.
Fidocat 4 months ago
Hate old videos like this one, they talk to you like your retarded and cant figure things out.....
moni370 7 months ago
Fantastic!
EpiquestGame 7 months ago
is serpentine belt the same as the power steering belt?? i was told my power steering belt needs to be adjusted but if this is the same thing i know my serpenting belt has not been replaced in several years so i reckon ill just replace it instead of just having it adjusted
hudsonjamesc 10 months ago
great tip at the end. Always good to save in case of emergency thanks.
truso 1 year ago 2
excellent explanation, keep up the good work, good illustration also and video, thank you.
siordia100 1 year ago
Thanks for the great explanation. How can you tell if your serpentine belt needs replaced?
carautoparts123 1 year ago
@carautoparts123 Usually just listening to your car as you drive, a whistling or squealing as you either start up or drive is a pretty good indicator.
aztovegas 1 year ago 3
THank YOU!
Squirefromcali 1 year ago
This has been flagged as spam show
Extremely helpful video. And to think I was gonna pay Midas $127.00 to do this...
timkelly817 1 year ago 5
Comment removed
timkelly817 1 year ago
boring voice, helpful video. thanks
imabichover9000 1 year ago
my belt slipped off while on my way home from work, as I am a woman and have no one to help me , this video has been most informative. Thank you so very much.
enveno1 1 year ago 2
lol nice video, and good music at the beginning haha
bmm1793 1 year ago
Great video !
credit490 1 year ago
At 2:12 is what I needed to know thanks. How to release pressure of tensioner.
daddeo01905 1 year ago
Clear, simple but very thorough instructions, Thank you...
Chewychaca 1 year ago
awsome!
xiaoxindiar 1 year ago
Not all cars have a self tensioning pulley., especially the ones that have separate belts for alternators, ac, and water pumps. You must check a repair manual for you specific car
lobextomy 1 year ago
my belt in my 97 250 vortec silverado just snapped earlier today. all day today, upon startup it would make a wierd noise n graduly fade, then on my way home it was making a whipping noise then it stopped and started to smell like burnt rubber. then my truck had a hard time running after that, i shut it off and pulled the snapped belt out. what causes a rubber coated copper insulated serpentine belt to snap at low rpm? how do i chck for seized pulleys? shud they all b easy to turn by hand?
fightingisfortheweak 1 year ago
This is a very useful video for the newbie mechanic, much appreciated.
3Fez4 2 years ago
great tips
had the feeling that these guys really take care.
especially mentioning the drawing and keeping the old belt for emergency situations are great tips.
thanks
fourorthree 2 years ago
I wish mine had a self tensioner.
damwmnm 2 years ago
Me too lol I have to loosen the power steering pulley.
Nirvalica 2 years ago
i mean video.
joshua1auhsoj 2 years ago
this really is a great belt.
joshua1auhsoj 2 years ago
great video, thanks! :)
shad0wh3arts 2 years ago
would a 94 s10 have a belt tesioner thingy? im used to my 66 pontiac that doesnt have all of the shot.
MehrerPerformances 2 years ago
the belt on my 99 taurus doesnt seem to come off so easily, its pissing me off i loosen the bolt on the belt tensioner pulley and the belt doesnt come loose that easily its really frusturating
guitaristwagner 3 years ago
you dont suppose to loosen the bolt you push the bolt away opposite from the belt its you will feel the tension release
ezkeyboardkid58 2 years ago
Good video. Thx.
IIIEOMIII 3 years ago