The new Stihl MS 441 shows at GaFa-Köln -PLEASE RATE-

[lat273]

The chain is modyfied... lot of work, but it works!

[Gauge1channel]

some fucking skill there

[pakakawhero]

slow my dad 44 and hes faster shitty ass

[cedric692]

holy crap

[FBO1104]

Das ist der Chainsaw-Samurai!!

[specialk18701]

will do that as long as the chain is brand new and sharp

[athlone07]

Hey folks! Where can i buy this stuff?Any cheap place~????pls urgent answ.

[woodscritter]

@athlone07

Nope. Apparently Stihl sales are dealers-only. Deutsche fair-trade?

And this sort of demo is simply crazy- great way to promote amputation. How about some ballistic nylon there.

[whb1965]

they ought to have them limbing real treess... wth

[NederSaks]

"PLEASE RATE"

Well I can't even see the chain and the dust..

[FirstOneUpHill]

so what

[cdstump]

i am a stihl fan. although, i feel that the topping saws are junk. all of the commercial pieces are worthy, otherwise. was the cutter in this video snorting anything b4 the video was made?

[kadettilac82]

Sport schön und gut, aber bei welchem Baum dieser Welt wachsen die Äste so schön gleichmäßig? :-) Und welcher Baum liegt nach dem Fällen so perfekt? Den möcht ich im Wald mal sehen, an einem verkrüppeltem Laubbaum :-)))

Trotzdem, Respekt für die einwandfreie Handhabung der Säge!

[EllesD09]

@kadettilac82 Aber

wie will man sonst einen einheitlichen maßstab auf diesen wettkämpfen finden ??

und:

bei fichten stangenholz gibt es soetwas wie Böcke

und da kann man sich das holz legen wie man will ist auch ungefähr die stärke von baum wie die bei den meisterschaft

[EllesD09]

Wer war das denn ???

einer der bekannten ??

Marco Berghöfer oder Thomas Wickert oder so ?

[forstholzi]

Gotthard Schwender

[steele1277]

Cool! Stihl saws are killer!

[lumberjak1984]

looks like me on the jobsite except witout all the gay gear

[chunkybut555]

Dang i gotta get me some STIHL equipment

[docrw]

I've owned a shit load of saw and you couldn't give me a Stihl! Jonsered is my favorite because of the performance to weight and dykes ring it uses. But also love my Husky's just harder to start because of compression. Nuff said.

But times may have changed since both companies are owned by the same company and they might be doing more for Husky then Jonny

If you like to clean your air filter everyday and love vibration by all means buy the Stihl

[tophamjenna]

my friend bought a husky and had a prob from the get go. he brought it back to the store and it took three weeks to get it fixed. i bought the ms361 had a prob with slow cuting (it just needed to be tuned) and had it fixed that day. never had a prob since then. my friend tho, he ended up with the ms 390. the husky got junked. and i have never seen a husky dealer like u see a stihl dealer must just be were i live, people around here dont have time to mess around with shit.

[docrw]

I feel the same way about Stihl. Your friend probably bought a consumer grade saw and not an XP pro saw and that was the problem. Stihl consumer grade saw are just as bad. It's better to buy a good clean used pro saw than a consumer saw.

Again I've owned more saws than you and your friends all put together and I won't buy a Stihl again.

[tophamjenna]

well first impressions always matter and i own every pro saw stihl makes except the 440

[megandtrev]

66 all the way iv had too off them for nine years and not one magor prob yet./ luv the germans saw here in auz

[09hubble]

quite fast that not far of meself :P

[alpnacher1993]

damme isch das schnell!!

[dansli26]

oh that i fast!!!! respect but you couldn't do that in the forest on tree lying on the ground

[ticker511]

I limbed tree's all day like that. He did a very good job. You should keep the saw on the tree and roll it back and forth. Hard to explan, that was for show. My wife bought a new 026 for limbing behind the skidder. I told her to be carefull,she started limbing dead spruce limb's like that. Going to fast, walked in to the saw, make it short she got cut . She was'nt a green horn.

[labonvilles]

That was cool. He got mighty close to his legs though. lol

[eittopschoop]

Went through about 5 038's then upgraded to an 044. Added an MS 440. Broke a piston in the 044 after cutting about 3500 cords of maple firewood, changed piston and have about 1000 cords on new piston. In my opinion, the 044 is a better saw than the MS440, but both have been replaced by the MS 441.

[zachsdaname]

hes scary,but kool!!!i want one

[Thoko21333]

WOW !!! Amazing =)

[Ford7810power]

Respekt nicht schlecht

[alderaforall]

we call that a useless talent

[needlenitz18]

go fuck yourself Assss Hole!!!!!!!!!!!

[donleery]

crapb slow

[logarock]

Saws are like women. I would have to actually hold one to see whats shes all about.

[hottie1415]

wow thtas fuckin impresive.

[firefighterml]

Junge Junge der schneidet sich die Fußnägel bestimmt auch mit seiner Säge.....nicht schlecht

[Fattybunta]

Im a tree surgeon and hav seen som awesom stuff but that was amazing!!

[sallythemut1234]

no way you could do that all day

[5elin]

Fuck he is quick

[mccormickchainsaw]

DAMN!!!!!!

[kalob35]

nice work!

[clevelandjimsmith]

you could have cut those pegs with a butter knife a lot faster.

[PERPARSON]

in slovenija when we have a forestworker competion nobody is so fast even with STIHL MS260 or HUSQVARNA 346xp but so fast with ms441 it's unbeliveble

[waaxa]

manyak ulan bu adamda keser  walla...

[palito2529]

eso es tener rapidez saludos a toda la familia stihl desde chile

[billyhay]

my concrete mustache is faster than that

[cuttercanfly]

worst saw ever...true

[PERPARSON]

and you are a highly ranked dumbass on youtube

[tacticalnudge]

What do you have to justify that this is a bad saw?

[edzia83]

good saw

[philbridger2004]

Stihl 441, awesome saw, cools down quick hence the sometimes slower starting, but thats probably due to the 4 port setup, very economic saw, would highly reccomend!

[chaosxorderx]

Very hard to start most of the time. Worse from a cold start. Floods easily. Cuts fine when it does run. I would not get another one.

[PERPARSON]

it very easy to start just must liste carefuly when the choke button is on...3times pull then you hear the little bang then you pull button on half gas- just one pull and saw work perfectly...sory for my bad english

[KanzlerM]

SOP for starting Stihl saws:

Full choke when cold.

Once engine tries to start, even just a pop,

1/2 choke and it starts right up.

[KanzlerM]

When it tries to start, even just a pop, go to 1/2 choke.

Let us know how it goes.

[PERPARSON]

you got that right

[dsuessisdead]

i work with kids faster then this

[whitmabry]

Im in foretery school he is average the saw aint much though

[basslodan]

fyfaan va manligt asså

[660magnum]

overpriced dont like it.

[Elk4758]

Man that was fast.

[bbarryy]

iv just bought the ms441W mint saw loads of toque

[inztrees]

My ms 441 sucks

[PERPARSON]

husky 575 suck's even more...dumbass

[colbycous01]

why, just use a machetty, cheaper, easier, and safer. not as fast, but almost.

[Holtorpan]

thats a real man!

[ekibrotom]

reve up and fuck off you silly wee boy have you tried shagging your gran.

[spiidger]

pretty neat sawing

[mmcodomino]

these are the only existing pictures of leatherface...

[Lawnandgardenwv]

sweeeeet

[ekibrotom]

not very quick where i come from we do that standing on our head

[reffup]

im sure that where you come from marrying your sister is leagal.. and having a 3 legged 6 toed baby is just fine with everyone wround you.. but where i come from morons are treated like morons you fuckin tool

[therealcatweazle1]

good work pal....any sharp saw will do though !

[Petder58]

I dont run stihl but damn thats fast, must be the operator. WOW

[qwertyuiopjame]

that was fast you wouldnt want to do that speed all day.

[gangstacandoit]

that woznt flush nah gud bro im logging in new zealand ive got a ms 660 stihl and a husqvarna 385xp

[frodeaux2]

Wasn't flush? Sure looked good to me, and I've got 3 66's, a 460, a 360, a 26, an MS200T, an MS192T and a 441, not that having chain saws makes your eyesight better.

[vwgolfr32vt]

its in my city!!! :D I was there!!!!!! :D

[seanfg]

i think leatherface was faster...

[ActizoL]

well any chainsaw would have done this , the operator is amazing!!

[zigleviet]

I own an Echo. It's the reason I just bought a Stihl. Took me a FULL DAY to get through a 30" dia. log with an Echo (22" bar, brand new chain). I bought an MS441 with 28" bar. Went through a nearly identical log in about an hour. Stihl's got my vote (although I'm not sure why cutting twigs could be considered impressive).

[JSY440]

if you had done any forest work you would realise that is very fast snedding and takes alot of skill!!

[zigleviet]

OK, no I haven't done professional forest work, so I'll take your word for it and express apologies. Live a little, learn a little (or in my case, sometimes learn a little less....) Ziggy

[frodeaux2]

An hour?? I have a 441 and that should take about 2 minutes, maybe less. We run a 20" bar with Oregon 72LGX, rakers taken down to .025, cutters hand-filed (7/32" file naturally). Unless you're running full-skip chain like Oregon 72JGX on that 28" bar, it might actually be slowing you down. But one hour?

[zigleviet]

OK. Please pay attention. Log. Not chunk or piece or one cut. The thing was 70+ feet long, probably closer to 80'. Bucked into 16 inch lengths. At 75 feet, that's about 56 pieces. So a little over a minute per cut, not including wiping off sweat. Not at all bad. That 441 rocks.

[frodeaux2]

Hey, peace. No need to imply I missed something obvious. When you said "went through a nearly identical log in about an hour", I just took it at face value. Casey too, it seems. Anyway, glad you cleared it up, and it certainly does seem that you know your stuff. Sorry for the confusion.

[CaseyD11]

Haha, one hour. What kind of wood is it? I have a Stihl 039 with a 20" bar, and a 25" red-oak log took me a little over 5 minutes. The most important thing is to have an evenly sharp chain so the kerf does not lean to one side. That is hard to recover from on larger logs since the only other option is to cut the same area twice. Good choice with the saw, though! Rest assured that you have one of the best out there ;)

CaseyD

[zigleviet]

Douglas fir if I remember correctly. So much much much softer than your oak. But see above please. That 1 hour was for the whole log, not one cut. Holy cow, an hour for a cut? I'd commit suicide first! And you are absolutely right about even sharpening and straight kerf. Good nice clean straight sharp chain == good clean cuts. Like I said the 441 Rocks! If only I could marry a chainsaw... :) (OK for anyone who might take offense, that was a joke.)

[sebastianbrosche]

:O:O

[sk8tillthedeath54321]

nice

[FederalQsiren]

nice ..

plz go watch my 2 new videos ! comments and/or rattings are greatly welcome !

[JRFFRB]

im gonna be buying a stihl ms441 w a 25" bar.

[kennyplay]

Echo??? best on the market?

[frodeaux2]

Echo's are not bad saws at all - I might go as far as "one of the best on the market". Excellent engines, start and run great. I'm a Stihl guy (066, 046, 441, 036, 026) but I think the Husky 346 beats the Stihl 026 Pro. Jonsereds are sweeeet, and Dolmar makes great saws. Just forget Poulan, McCollough and Crapsman.

[kennyplay]

...the 346xp is a fast runner. I have a 034AV super! Jonsered is Husky...Efco and Solo rock too

[reffup]

ive got an o34 av as well.. beautiful little saw i love it

[Donnie10100]

Pretty impressive but not too good for teh saw revving the living daylights out of it all day like that!

[macdonaldjohnstonfan]

Stihl and ECHO are the best on the market!!!

[eagle30233]

Stihl is in my opinion, the best saw that you can get on the market these days.

[Knut3]

Wow! Very impressive!

[infectedshr00ms]

makes you wanna slice people ;)

[Josh30041]

wow! nice job! stihl is the best!