Good work man! I just bought a 09 ss/tc . Im in the middle of building it but what axles are you running cause i cant find any to hold over 300. Im new to the cobalt word and turbos been doing alot of researching. Ive always had surpercharged vehicles but first turbo ive had. But any insight from what youve done would be greatly appreciated. and thanks for serving our country!
@neveragain910 - With the 09 SS/TC... you don't need axles. The factory axles have been proven to over 500whp on slicks. If you're breaking stock LNF axles... you're doing it wrong. Haha.
@airline2009 Its very easy to make a 2.2L make/hold 400whp. It just takes a little bit of money. A stock 2.2L will not hold 400whp, though. You'll need Forged Pistons and Rods.
@airline2009 the rods would handle up to about 250-260hp you'll have to revamp the cams, and drivetrain. but the heads and block should handle up to around 400-500hp
@FloridaEvoXTuner ...yeah, I'll try and do some Fly-By's later this week or something. I tried some earlier, but you couldn't really hear anything because of high winds.
@rossshady120 Low boost with a Boost Leak, the car dyno'd 340whp/310wtq. Never dyno'd it after fixed the boost leak... but it gained a considerable amount of power and torque - but judging by data from HPTuners logs and comparing them... it jumped to around 360/340. Then I turned the boost and timing up... didn't dyno it... but comparing logs, I'd say it jumped to around 410whp/370wtq. Totally not accurate, but I don't care enough to dyno it. It performs on the street. Good enough for me.
@USMCFieldMP watch out i put down 300 with just the TVS and stock motor and some bolt ons and i have a 4 speed! Engine blew up few weeks ago were building the block should be making 350 easy getting p&p, valve springs, balance shaft deletes, the works. Josh@OTTP is building it, This was a few weeks before it took a dump on me.
@rossshady120 What am I watching out for? The big, bad TVS car making 350whp? Hahaha. On my old turbo set-up making 350whp, I was only 1 car behind Area's 378whp TVS car. You're gonna be making 350whp? Oh wow... watch out for this guy! In this video, I was making around 375whp. A few weeks later, I changed the maxed fuel pump out for a Walbro 255, retuned it, and turned up the boost, and was making 400whp before putting it in the garage for the winter.
sounds great.
dannybis1987 3 months ago
very nice car,excellent sound!...do you have a quick spool with that precision turbo?i m thinking for the same turbo for my audi s3 8l..
JDCHIAS3 11 months ago
Nice car!stock clutch?...
JDCHIAS3 11 months ago
@JDCHIAS3 - Spec Stg2+
USMCFieldMP 11 months ago
you know you wanted to race that eclipse i saw the look lol good vid man
stirfrydeath 1 year ago
Good work man! I just bought a 09 ss/tc . Im in the middle of building it but what axles are you running cause i cant find any to hold over 300. Im new to the cobalt word and turbos been doing alot of researching. Ive always had surpercharged vehicles but first turbo ive had. But any insight from what youve done would be greatly appreciated. and thanks for serving our country!
neveragain910 1 year ago
@neveragain910 - With the 09 SS/TC... you don't need axles. The factory axles have been proven to over 500whp on slicks. If you're breaking stock LNF axles... you're doing it wrong. Haha.
USMCFieldMP 1 year ago
@USMCFieldMP Where did you get the pillar mount to make it look so clean the other two gauges look like they belong there..i love it.
iTzDark740 9 months ago
man you have one of the best sounding cobalt turbo Ive heard....props keep up the good work
09CamaroFANATIC 1 year ago
If i did that how much would i have to crank up the boost?
airline2009 1 year ago
What would you say be the odds of a 2.2 cobalt taking that much power?
airline2009 1 year ago
@airline2009 Its very easy to make a 2.2L make/hold 400whp. It just takes a little bit of money. A stock 2.2L will not hold 400whp, though. You'll need Forged Pistons and Rods.
USMCFieldMP 1 year ago
@airline2009 the rods would handle up to about 250-260hp you'll have to revamp the cams, and drivetrain. but the heads and block should handle up to around 400-500hp
pawntec 11 months ago
it was time.................... nice video
huckernage 1 year ago
Gahh!!! sexy ride, can u do any fly bys videos?
FloridaEvoXTuner 1 year ago
@FloridaEvoXTuner ...yeah, I'll try and do some Fly-By's later this week or something. I tried some earlier, but you couldn't really hear anything because of high winds.
USMCFieldMP 1 year ago
@FloridaEvoXTuner what are your numbers?
rossshady120 1 year ago
@rossshady120 Low boost with a Boost Leak, the car dyno'd 340whp/310wtq. Never dyno'd it after fixed the boost leak... but it gained a considerable amount of power and torque - but judging by data from HPTuners logs and comparing them... it jumped to around 360/340. Then I turned the boost and timing up... didn't dyno it... but comparing logs, I'd say it jumped to around 410whp/370wtq. Totally not accurate, but I don't care enough to dyno it. It performs on the street. Good enough for me.
USMCFieldMP 1 year ago
@USMCFieldMP watch out i put down 300 with just the TVS and stock motor and some bolt ons and i have a 4 speed! Engine blew up few weeks ago were building the block should be making 350 easy getting p&p, valve springs, balance shaft deletes, the works. Josh@OTTP is building it, This was a few weeks before it took a dump on me.
rossshady120 1 year ago
@rossshady120 What am I watching out for? The big, bad TVS car making 350whp? Hahaha. On my old turbo set-up making 350whp, I was only 1 car behind Area's 378whp TVS car. You're gonna be making 350whp? Oh wow... watch out for this guy! In this video, I was making around 375whp. A few weeks later, I changed the maxed fuel pump out for a Walbro 255, retuned it, and turned up the boost, and was making 400whp before putting it in the garage for the winter.
USMCFieldMP 1 year ago
Damn that thing is fast
Lol @ the 2g DSM for the wheelspin at 1:14
YelloEye 1 year ago
@YelloEye No such thing as a 2G DSM ;)
tylerh200 1 year ago
Nice, should have followed the eclipse lol.
cmiller8006 1 year ago
@cmiller8006 ...haha, yeah. I thought about it. I really wish I would have.
USMCFieldMP 1 year ago