Kreg Jig® Workbench Part 3

[Derekinstpete]

not enough glue, utilize a piece of scrap and spread it out properly (complete, thin coverage) - it should have had at least a cup or two of glue on it there, you want a small bead to form at the seam, drips and pools mean you used too much, no bead or incomplete bead means too little.

[Derekinstpete]

measure off the tooth, not the blade if you want it exact... maybe over kill for a workbench but if you are building furniture, etc...

[alexdolerion]

@GloriousGuyHill

Glad your happy with it the program

offered by the site:

TopWoodWorking.info

with really top performance..:) Its nicely

layed out, good printing and with lots

of images for inspiration and good de-

signed.:)) Its best man!

[MrJGtiling]

Very nice ,,,,

[tconst17]

My 14 year old daughters shop class laughed at this.

[levicash]

@tconst17 I would love to see what they built. post it.

[PandawdyBob]

Got the workbench completed. I used plywood for the shelf and top two layers. Still looks great. Very solid. It's already getting a lot of use.

[PandawdyBob]

This work bench looks pretty easy and I've got a lot of 2x4's laying around. Think I'll build it tomorrow.

[crazyrittah]

This guy is good. Reminds me of Jim Carrey the way he talks and acts. Makes it more fun for me at least.

[wmcrash]

MDF is nasty stuff, bro! Wear a dust mask at the very least.

[tomx63]

can i buy the workbench you just made?

[donepearce]

Use, not utilize. Why make life harder than it need be?

[Cowcharge]

Man, play Smuggler's Blues at the end.

[NixonAre]

jeff devlin = Jim carry`s carpenter brother.

[WanderingArtificer]

i just ordered a kreg jr.

I've done a few things with wood, and i can now say, after watching this... im extremely excited to get it.

[TheSaltysack]

nice job u just made me wana build my own thanks for tips and vid

[caprice2020]

thanks a lot you make it easy to me

[GameVoid]

"Now comes the easy part" - *clang*

lol

[woodentoolcompany]

If you want a faster and easier way to drill pocketholes check out my foot lever jig that allows you to open and close the jig with a foot lever. Way faster and easier. Works with k3 and k2 style jigs. Painful to watch drilling pocketholes without one/

[TheKiems]

I'm in the UK and made the workbench with the plans from Kreg. Slightly customised but the instructional video and jig made the job a joy.

[TheMowjo]

Nice to see a vid that dosn't over complicate a job, Jeff should make more of them, Mulac! I'm in the UK and know what you mean about our sizes, 4x2 sawn is usualy 4x2, but planed 4x2 is 94mm x 44mm, I use a similar jig to the Kreg one, all I do is measure the wood in mm and adjust the drill collar, the nearest jig size is 2in for the actual size of 44mm, so when you set the drill stop on the jig just set it at 6mm less,, hope that all makes sense,,,

[MCSFAST]

CONGRATULATIONS GOOD VIDEOS!

[rohenwi]

Hello is that you can send me the catalog of the table to know the steps ... thanks

[rohenwi]

Hi, I'm from Venezuela and I want to know what kind of wood used to manufacture the table .... Thank you.

[rohenwi]

Hola, será posible que envíes el proyecto o lo coloques en alguna pagina para copiarlo y tener las medidas de esa mesa. Gracias.

[dustoff499]

Great videos "Tool Belt Person" [ Jeff].  :)

You sure do made it look easy. My first project will be similar but will hold a utility sink. I can use some of your tips - thanks.

[Vincerama]

Awesome video, awesome jig, awesome workbench, awesome host, awesome toolbelt!

The host makes it look simple and I like his little reminders at the exact points where mistakes can be made. Very well done.

[blip789]

@Vincerama Awesome comment.

[mulac321]

im from england here 2x4 is 46mm thick does that mean i cant use this jig on 2x4 over hear

[Vincerama]

You can still use it, the jig works on many size, you just gotta convert your measurements!

[jero1953]

Exelente: realmente se aprende mucho con estos videos. Yo aprendo mirando prestando mucha atención ya que no se Ingles pero me las ingenio. Es una pena que aqui en Argentina no se consiga los accesorios Kreg jig. FELICITACIONES!!!

[rohenwi]

Que broma amigo en Venezuela tan poco, lo mas cerca es Colombia. yo tan poco se ingles pero uno mira y aprende, saludos desde Venezuela.