We're actually running an 18 x 11.5 in the rear with OEM back spacing. We're also running a tall Hoosier R100 Road Racing slick. 30mm should be ok as long as you are not planning on a rear brake kit or brake upgrade. Texas Mile does not allow drag radials and the tires have to have the proper speed rating for in excess of 200 MPH.
Awesome car! Just wondering what wheel and tire sizes you guys are running and what offsets? I love the stance your car has and my mustang needs more rear tire so I've been looking at 20x10.5 with a 30mm offset and I think that's close to what your running?
We were tuning the car added boost and pulled the timing way down. We can make more power but the goal of 1,000 rwhp was achieved and we knew our boost, timing and air/fuel ratios were where they needed to be.
I love the car but when you have the same aerodynamics as a brick it's hard to aim for top end! They're made to be a Muscle car, so when you gun it you can woop up on that comaro ss or challenger, or if your racing a classic like a cuda... Not to beat a ferrari... And if its for drag racing you go tube chasis, not a 3700 lbs brick, but still awesome so Good Luck!
If you search my other videos we accomplished our goal and we are going back for more. We know the aero issues with these cars and that is part of the challenge in doing this. Others have commented why do it supercharged? We wanted to do it with a supercharger all along. Turbo is a different concept. We hit 204.9 and took the standing mile supercharged GT500 and Super Snake record. Thanks for the post!
That's actually the tires making the noise. They are Toyo R888's. They did that on every dyno. We've since moved on to a Hoosier R100 Road Racing slick.
It's a BMR / GRIGGS combination. Revan Racing Designed and built. The Wheels are HRE's with custom carbon fiber wrap lips and Toyo R888's on all four corners
This has been flagged as spam show
GOT DANG!! that car is beast... it so bad that the others had to run from it haha
MrHighFlyer45 6 days ago
GOT DANG!! that car is beast... it so bad that the others had to run from it haha
MrHighFlyer45 6 days ago
LOVE that noise!
AndrewCruzeUK 1 week ago
this thing cost so much performance wise they didnt have money to get rid of the hood prop rod :)
hsp692 1 week ago
@hsp692 Good oberservation. However the reason we didn't put gas struts to hold the hood up????????????
Gas struts will cause the fiberglass Super Snake hood to bow in the middle because the gas struts cause constant pressure.
Besides, the hood is supposed to be down so we can go fast!! :)
dactylious 1 week ago
what rims ? please
TheXUAEx 1 month ago 2
@TheXUAEx
HRE's. Not sure which ones specifically. Sorry.
dactylious 1 month ago
sweet car, but rip to my ears from using headphones
Corrybasler 1 month ago
@Corrybasler
You think that's loud you should see what it sounds like in the car at 200 MPH!
dactylious 1 month ago
We're actually running an 18 x 11.5 in the rear with OEM back spacing. We're also running a tall Hoosier R100 Road Racing slick. 30mm should be ok as long as you are not planning on a rear brake kit or brake upgrade. Texas Mile does not allow drag radials and the tires have to have the proper speed rating for in excess of 200 MPH.
dactylious 1 month ago
Awesome car! Just wondering what wheel and tire sizes you guys are running and what offsets? I love the stance your car has and my mustang needs more rear tire so I've been looking at 20x10.5 with a 30mm offset and I think that's close to what your running?
BlownTPI383 1 month ago
This guy is legit !! featured in fast ford's..
TheMean93 2 months ago
@THEMASTEROFYOU2000
It's got Oliver Billet Rods and Custom Diamond Pistons. Motor is just fine.
Check my other video of The Fastest Supercharged GT500 and Super Snake in the World. Those were WOT pulls at 200 + MPH.
dactylious 2 months ago
@THEMASTEROFYOU2000 It's not a Chevy. 5.4 can easily handle this power.
greendayrules11 2 months ago
im surprised that 3 psi did so little with such a large blower.
blueoctaneevoX 3 months ago
@blueoctaneevoX
We were tuning the car added boost and pulled the timing way down. We can make more power but the goal of 1,000 rwhp was achieved and we knew our boost, timing and air/fuel ratios were where they needed to be.
dactylious 3 months ago
@dactylious oh i see. what kind of fuel are you using? ethanol perhaps?
blueoctaneevoX 2 months ago
@blueoctaneevoX
Yes, E-85.
dactylious 2 months ago
I love the car but when you have the same aerodynamics as a brick it's hard to aim for top end! They're made to be a Muscle car, so when you gun it you can woop up on that comaro ss or challenger, or if your racing a classic like a cuda... Not to beat a ferrari... And if its for drag racing you go tube chasis, not a 3700 lbs brick, but still awesome so Good Luck!
marshonmellows 3 months ago
@marshonmellows
If you search my other videos we accomplished our goal and we are going back for more. We know the aero issues with these cars and that is part of the challenge in doing this. Others have commented why do it supercharged? We wanted to do it with a supercharger all along. Turbo is a different concept. We hit 204.9 and took the standing mile supercharged GT500 and Super Snake record. Thanks for the post!
dactylious 3 months ago
@dactylious have u seen the kugel familys trans am that did 303 avg in 1999 at bonneville?
while not a stock ta,it did get the record for fastest stock bodies car.
it reached 308 for a 303 avg.its on you tube under the worlds fastest car(303 mph!)
SHARKREEF2011 2 months ago
love the noise it makes when he lets off it. Absolute monster.
210Terranovas 3 months ago
@210Terranovas
That's actually the tires making the noise. They are Toyo R888's. They did that on every dyno. We've since moved on to a Hoosier R100 Road Racing slick.
dactylious 3 months ago
Saw it running this spring at the TX mile getting close to 200 (195 mph) before the trans let go..
Heard y'all have since gone 200+ good job!
edmundnlemadim 3 months ago
@edmundnlemadim
Thanks! We have a video of the 200+ MPH runs posted.
dactylious 3 months ago 2
were does it redline at
greenbay51894 3 months ago
@greenbay51894
7400 RPM
dactylious 3 months ago
@dactylious dam
greenbay51894 3 months ago
hey this guy was the feature car two months ago in the 5.0 mustang magazine
archibaldcox 4 months ago
@archibaldcox
Yes.
dactylious 3 months ago
OMFG THAT THING IS A BEAST!
MrCleanPolo 4 months ago
Sounds awesome! Recognized your car from 5.0 Magazine.
ModularCal 6 months ago
you know your car is a beast when you can't hear the supercharger over the exhaust...
nickschmidt101 6 months ago 7
What $ did you have in L&m building the engine? Mines on it's way to them and not sure what I can get on my budget but I hear he's the best!!
04cobraKB 7 months ago
It's a BMR / GRIGGS combination. Revan Racing Designed and built. The Wheels are HRE's with custom carbon fiber wrap lips and Toyo R888's on all four corners
dactylious 8 months ago
hows the tune lol
stangdude360rs 9 months ago
Love it!
coronas956 10 months ago
shes a BEAST!!
lop8828 10 months ago
I guess I stopped by on the wrong day all I got to see was her in the parking lot. lol
wldwst22 11 months ago